Cost minimization through the use of taungya system in pulpwood plantation establishment

The costs and benefits of the use of three labour alternatives: direct permanent, direct casual and taungya labour in Gmelina arborea pulpwood plantation establishment in Nigeria were investigated. Results show that cost per hectare is lowest with taungya labour and highest with permanent labour with savings in cost of as much as 30% and 47% by taungya labour over casual and permanent labour respectively. The net present value per hectare of investment is highest when taungya labour is used and lowest and negative with permanent labour. Also, the internal rate of return of investment is highest with taungya labour and lowest with permanent labour. The net present values and internal rates of return for Gmelina plantations calculated for the three pulp and paper mills in Nigeria show the same trend in favour of taungya labour.     

宜兴市官林污水处理厂工艺设计

介绍了宜兴市官林污水处理厂的工艺设计过程，该污水厂针对处理对象的水量和水质采用了循环式活性污泥法。     

Influence of plantation site and wastewater sludge fertilization on the performance and foliar nutrient status of two willow species grown under SRIC in southern Quebec (Canada)

Salix discolor Mühl. (Sd) and Salix viminalis L. (Sv) were planted under short-rotation intensive culture (SRIC) on three unirrigated abandoned farmland sites with different drainage conditions, one well-drained (S₁) and the other two poorly-drained (S₂, S₃). One dose of dried and granulated sludge equivalent to 150 (T₁) kg of “available” N ha⁻¹ was applied to some plots in the spring of the second season while others were left unfertilized (T₀). The aims of the experiment were (i) to investigate plant response (growth and productivity) to plantation site conditions and sludge application; (ii) study nutrient status by foliar analysis. Over three seasons, growth in height and aboveground biomass were greater for S. viminalis than for S. discolor on all sites. S. viminalis planted on poorly-drained site 2 had the highest biomass yield (45.28 t ha⁻¹). Both species showed best height and diameter growth on poorly-drained sites. For both species, best performances were obtained on wastewater sludge fertilized plots. Comparative foliar analysis suggested that unfertilized sandy soil (S₁) and low foliar nitrogen concentration and content were limiting factors in the performance of the two species. Soil nitrate concentration increased as a result of sludge application. Heavy metal accumulation from sludge does not represent a risk to the environment. It was concluded that S. viminalis had the best productivity on clay sites, and that a moderate dose of dried and pelleted sludge (150 kg of “available” N ha⁻¹) may be a good fertilizer during the establishment of willows in SRIC, and may reduce nitrate leaching.     

Application of cationic polymer prepared from sulfuric acid lignin as a retention aid for usual rosin sizes to neutral papermaking

Cationic polymers that acted as the retention aids for usual rosin sizes in neutral papermaking were prepared from sulfuric acid lignin (SAL), one type of acid lignin. To convert SAL to the cationic polymer (MP-SAL), SAL was phenolated and then treated by the Mannich reaction to introduce the amino groups. In the MP-SAL single system, MP-SAL exhibited high sizing effectiveness in neutral papermaking with the rosin emulsion size. However, MP-SAL showed no sizing effectiveness when soap rosin size was used. MP-SAL showed increased sizing effectiveness as the pK _a of the introduced amino group increased. From this and comparison of the sizing degrees of MP-SAL and polyethylenimine, which possesses a linear structure, it was suggested that the sizing effectiveness was not only affected by the charge density and molecular weight, but also by the basicity of the introduced amino groups and the molecular structure of the retention aid. In the alum–MP-SAL dual system, alum and MP-SAL synergistically enhanced the sizing effectiveness in the rosin emulsion sizing at neutral pH. In turn, this allowed a decrease in the MP-SAL dosage and resulted in a small decrease in brightness.Part of this report was presented at the 48th Lignin Symposium, October 2003, Fukui     

国内外竹材造纸及其经济效益评价

本文根据国内外(包括中国、印度、日本、孟加拉国、缅甸、菲律宾、澳大利亚、苏联等)报道的竹材制浆造纸方面资料综合而成。文章内容有引言、竹材纤维形态与化学成分、世界竹材造纸工业简况和造纸竹材利用的经济效益。文章列举大量事实说明造纸工业用竹材为原料比用针叶材或阔叶材经济效益高。     

电子废弃物拆解污染土壤施用污泥发酵渣对香根草吸收与转运重金属的影响

为探究施用污泥高温好氧发酵渣（以下简称“发酵渣”）对电子废弃物拆解污染土壤改良和植被恢复的影响,通过盆栽试验比较添加不同剂量发酵渣（3%和6%）对土壤有机质、养分、重金属形态及香根草吸收与转运重金属等的影响。结果显示：施用发酵渣显著提高了土壤溶解性有机质的荧光指数和在226~400nm范围内的紫外吸光度积分值,但显著降...     

磷形态和pH对剩余污泥磷释放的影响

为了探讨pH对污泥中磷的释放行为的影响,采用SMT(欧洲标准测试组织)法对上海三处污水处理厂的剩余污泥中磷的形态进行了分析,并通过室内模拟实验研究了不同pH条件下3种污泥中的磷在海水中的释放行为。结果表明:3种污泥样品的总磷含量各不相同,污泥有机磷含量低,无机磷是主要赋存形态,占TP(总磷)含量的64.42%~83.01%。各形态磷的相关性分析发现,污泥总磷含量主要受NAIP(非磷灰石无机磷)和AP(磷灰石无机磷)影响。室内试验表明,污泥中的磷在酸性、中性和碱性海水环境下均有释放,相比中性条件,酸性和碱性水质更有利于磷的释放;污泥中磷的释放与磷的形态分布有关,但磷释放量大小并不简单取决于总磷和无机磷的含量。     

碾米机技术在我国的发展状况

碾米机行业经历了一个由小到大,由不规范到规范的发展过程。近年来随着我国农村经济的发展、国家产业政策的调整以及人民生活水平的提高,碾米机行业进入新一轮的调整阶段。产品结构将随着市场要求趋向更加合理、产品质量更加安全更加可靠。     

杨凌城市污泥重金属环境风险评价及合理施用量研究

为科学确定污泥施用量和评价污泥中重金属的环境风险,根据重金属不同形态的环境效应引入毒性响应系数确定了污泥的合理施用量,并采用单项污染指数、内梅罗综合指数和地积累指数对污泥中重金属的污染程度进行了评价.初步确定杨凌城市污泥合理施用量为4.04 t/（hm2·a）,Cd是限制该地区污泥施用的最主要因素,该方法突出了重金属形态的重要性,弥补了以往对重金属只进行总量控制的不足.     

废木片调理有机固体废弃物有氧堆肥工艺研究

食品加工厂剩余污泥含有丰富的有机质及氮、磷和微量元素等养分,可作为有机肥料和土壤改良剂。针对食品剩余污泥特性,采用高温好氧堆肥工艺,用牛粪、米糠、木片做添加剂,探讨了3组配比实验：第1桶,食品剩余污泥∶牛粪∶米糠∶木片=1∶0.5∶0.34∶0.71;第2桶,食品剩余污泥∶牛粪∶米糠∶木片=1∶0.5∶0.45∶0.86;第3桶,食品剩余污泥∶牛粪∶米糠∶木片=1∶0.5∶0.23∶0.56。综合实验结果分析,第2桶的效果最好,最后达到的参数指标温度、含水率、pH值、有机质含量、TOC的数值分别为28.1℃、30.6%、6.8、69.2%、29.1%。