PROBABILISTIC EVALUATION FOR STEEL FRAME COLUMNS OF TALL BUILDINGS

Based on properties of parameters and test data of dom-estic steel,this paper analyses the reliability and partial coefficient forresistance of steel frame columns of tall builings.The result may serveas a scientific basis.It is not only for domestic steel instead of importedsteel in building tall steel structures,but also for compiling concerendstandards.     

The Software System for Computation and Drawing of Ship Properties

The softwa re system suggested in this paper is applied to replace the traditionalhanded-computation forms. It uses the cubic sample interpolation and numerical integral,and is writ-ten with FORTRAN according to the accurate formula. With this software system,the nine sorts ofcomputation results of ship properties can be obtained. The system is con nected through SCR filewith AutoCAD,and ean draw automatically eleven sorts of pictures according to the computation re-sults.     

The Monitoring Measurements and Country Rock Control of NATM in Tunnel of Express Road during Construction

In this paper the author' s study on the monitoring measurement technique of NATM,the regularity and conditions of the country rock deformation are analysed based on the site measurement data in the west section of Zhongliangshan tunnel. The regression analysis of measure data for different measure lines of vavious country rock is done by the use of self-compiled CRAP program. The stability criterion for various rockmass and optimum time for primary and permanent support are provided. The conclusion available could conduct the theoretical research of NATM deeply as well as tunnel design and construction.     

A SDUDY ON THE LOCKING PERFORMANCE OF THE SYSTEM FOR HEIGHT OF MG150-WD COAL SEAM SHEARER

In this paper, based on the automatic-control theory, the time and frequency response of the hydraulic control system for height of MG150-WD coal shearer are analysed, and the steady and dynamic locking performance tests are made. The results show that the locking performance is satisfactory.     

玉米自交系及杂交种抗青枯病鉴定

1986-1989年采用自然鉴定和人工土壤接种鉴定的方法，对602份玉米材料的青枯病抗性进行了鉴定。人工接种鉴定397份，其中204份材料表现抗病。在正常年份，人工接种鉴定效果明显好于自然鉴定，但在重病区或青枯病流行年份，在尚未具备人工接种条件时，利用自然发病作为选育抗病材料仍有一定效果。玉米苗期接种青枯病重于成株期     

土壤水分对稻米外观品质的影响

水稻的分蘖期、长穗期、抽穗后1～10d、11～20d、21～30d及1～30d,用负压式土壤湿度计监测,分别进行土壤水势为-30～-35kPa、-60～-65kPa的控水处理,收获后对优势粒、中位粒、劣势粒进行粒形和垩白测定,发现在不同土壤水分下S品种长穗期和抽穗后1～10d控水显著抑制了籽粒伸长,也不同程度的抑制了籽粒增宽和长厚,以S4处理受抑制的程度最为严重;Y品种主要是长穗期控水显著抑制了粒长、粒宽和粒厚;两品种的多数处理不同程度的提高了粒厚,这在优势粒中更明显;土壤水分对粒长/宽的影响很小。S品种各处理垩白率、垩白度多低于CK,Y品种各处理垩白率、垩白度多高于CK。对两个品种来说长穗期是影响外观品质的主要水分敏感期,节水栽培应从品种选择入手。     

促芽肥与杂交中稻再生力关系及其作用机理

１９９１－１９９３年以２个杂交中稻品种为材料，研究了促芽肥与杂交中稻再生力关系及其作用机理。结果表明，促芽肥不能提高到２、倒３节位活芽率，可提高倒４、５位活芽率。促芽肥对再生力的效果与母茎 鞘干物质重有关，当母茎鞘干物质过大或过小时，促芽肥的作用极小。     

水稻籽粒中内源多胺及其与籽粒充实和粒重的关系

以８个水稻品种（含杂交稻组合）为材料，研究了籽粒发育期内源多胺的含量及其与籽粒充实和粒重的关系。结果表明：籽粒中Ｐｕｔ（腐胺）、Ｓｐｄ（亚精胺）和Ｓｐｍ（精胺）的含量，强势粒高于弱势糕卫粒充实好的品种（组合）高于籽粒充实差的品种（组合），尤以Ｓｐｄ和Ｓｐｍ更明显；籽闰中Ｓｐｄ和Ｓｐｍ的含量或浓度，以及Ｓｐｄ／Ｐｕｔ和Ｓｐｍ／Ｐｕｔ的比值与谷粒充实率和千粒軎于极显著正相关在花后３天喷施外源多胺（１ｍ     

Analysis on the Grain Growing Characters in Wheat under Different Seedling Density

通过对不同密度处理的小麦子粒生长过程的分析表明：小麦开花后子粒鲜重、体积均呈“低—高—低”的变化,鲜重的变化略滞后,开花后含水量则不断下降,下降速率最快时期与灌浆速率最高时基本吻合。用logistic方程拟合了不同密度小麦子粒灌浆过程,快增期的天数和灌浆速率比较稳定;缓增期天数和灌浆速率的变异系数较大。因此,在提高缓增期灌浆速率的基础上,延长灌浆缓增期是目前增加粒重的关键。     

双环带种肥穴播器的设计

针对目前穴播机械的现状,设计了一种新型的双环带种肥穴播器,介绍了其基本结构和工作原理.从结构上分析了种肥穴播合理性,并推导出了穴播器的入土端方程.试验证明,机速在1.0m/s时,该穴播器投放种子与肥料可靠,穴粒数、穴距和播深合格率都能满足要求.鸭嘴强制后开式设计有效解决了堵土问题,播种精度较高,可广泛应用于花生、棉花、玉米与小麦等农作物的播种.