非班太尔对照品的定值研究

(目的)本文旨在联合使用质量平衡法与差示扫描量热法2种定值方法测定非班太尔对照品的含量。(方法)采用高效液相色谱法测定非班太尔的纯度,采用卡尔费休氏容量滴定法、炽灼残渣检查法、气相色谱法分别测定其水分、灰分和残留溶剂,由质量平衡法公式计算非班太尔对照品的含量;采用差示扫描量热法对非班太尔对照品含量加以佐证。(结果)质量平衡法和差示扫描量热法测定结果经科克伦判定互为等精度,取其算术平均值作为最终定值结果,即非班太尔对照品含量为99.66%。(结论)质量平衡法与差示扫描量热法对非班太尔对照品的定值结果基本一致,2种方法能够更好地保证非班太尔对照品赋值的准确性。     

Quantification of reservoir bags as airway pressure-limiting devices in a nonrebreathing system

ObjectiveTo evaluate the influence of reservoir bag types, volumes and previous use on the peak pressures (Pmax) and the times to develop 30 cmH₂O pressure (P30) within a nonrebreathing system with a closed adjustable pressure-limiting (APL) valve.Study designIn vitro study using three-way factorial design with repeated measure on one factor.SubjectsA total of 75 new anesthesia reservoir bags (five types, three volumes, five bags from each type × volume). The bag types were reusable latex (RL), disposable latex (DL) and three disposable neoprene (DN-1, DN-2 and DN-3).MethodsEach bag was tested three times (treatments): new, after prestretching and 1 week later. The bags were attached to a Bain system and anesthesia machine with closed APL valve and patient port with O₂ flow 2 L minute^–1 until Pmax was reached. The Pmax and time to reach P30 values were determined from recorded pressure traces. General linear mixed model analysis was used to examine the effects of bag type, volume and treatment. One-sided 95% upper prediction limits of Pmax were calculated to test the null hypothesis that predicted Pmax of new bags would be ≥ 50 cmH₂O for each factor combination.ResultsRL bags were the least and DN-3 bags were the most compliant. Prestretching increased compliance in all bag types. Smaller bags of RL, DL and DN-1 were less compliant than larger ones. The predicted Pmax values were < 50 cmH₂O only for DN-3 bags after prestretching. The time to reach P30 was critically low when using 0.5 L bags (median 17 seconds).Conclusions and clinical relevanceTo minimize the risk of barotrauma, highly compliant reservoir bags (e.g. DN-3) are recommended and reusable bags should be avoided. Bags should be prestretched before first use, 0.5 L bags should be avoided and fresh gas flow minimized.     

灌溉设备产品信息与报价系统的开发

本文介绍了开发灌溉设备产品信息与报价系统的必要性及功能 ,较系统地阐述了该软件系统的实现思路 ,并对其应用前景作了初步预测     

通信设备运营和电力的维护

文章结合中国网通近两年来内部控制项目实施的实际情况和圆满通过外部审计师审计的经验,对目前通信网络设备维护工作中存在的问题和相应带来的风险进行剖析     

水头可调薄壁堰式渠道流量智能测控系统优化试验研究

采用巴赞堰流公式计算流量的水头可调薄壁堰式渠道流量智能测控系统通过渠道流量量测与控制试验,验证了其精准的测流功能和智能控制技术的可行性。为进一步提高该测控系统运行的效率和稳定性,减少运行能耗,对矩形薄壁堰堰流公式进行水力试验研究,通过分析堰上水头和流量关系,拟合出矩形薄壁堰流量计算公式。通过向该拟合公式引入修正系数λ=0.848,将测控系统测得的堰上水头数据值代入该拟合公式求得的流量值与电磁流量计测得流量值的差值的平均值为-0.004L/s,标准差为0.119,线性相关系数R2=0.989 1。该拟合公式相对于巴赞堰流公式形式简单、参数较少、运算简便,同时也满足节水灌溉对精准测流的要求,更适用于水头可调薄壁堰式渠道流量智能测控系统,对于在灌区推广和使用该测控系统具有重要的意义。     

加强农业技术推广体系建设的对策

近年来农村的发展逐渐受到重视,农村的建设也取得了比较好的效果。当前为了更好地促进农业的发展和农村的建设,加强农业技术推广体系的建设逐渐得到认可。农业技术推广对于转变农业发展方式,促进农业经济的发展和农村的建设有着积极的作用。但是农业技术的推广中也遇到了一些困难,当前需要及时解决农业技术推广的障碍,更好地促进农业的发展。     

基于TC35模块的智能家居控制系统

随着这些年的研究,智能家居有很多种实现方式,文章介绍的智能家居控制系统采用单片机和TC35模块组成,使人们通过手机在任何时候,发一个短信,就可以对家中的电器（空调、照明灯,电饭煲、热水器等）进行远程控制。     

单片机技术在自动给料系统中的应用

文章设计了基于单片机控制的送料机自动送料机控制系统,论述了单片机AT89C51在实现其生产过程控制的自动给料系统的设计方法。     

微热光电系统燃烧室内截面突变对燃烧的影响

微燃烧室是微热光电（MTPV）系统的重要组成部分。微燃烧室的外表面必须产生一个高而均匀的温度分布，以尽可能高地输出辐射能。通过对截面突变的微燃烧室的试验研究，得到了不同氢氧混合气流量、氢氧体积混合比下燃烧室内的燃烧状况，壁面和出口端面的温度分布。试验结果表明：采用截面突变的燃烧室能很好地控制火焰中心位置，获得稳定的外壁面温度分布规律，可以在截面突变处产生涡流，增强氢气和氧气的混合。