田园管理机悬架部分的建模及仿真

主要介绍了虚拟制造技术在田园管理机悬架上的应用,并对田园管理机械的应用及特点作了介绍。针对目前的田园管理机的悬架存在的问题进行了研究,利用大型的三维建模软件Pro/E建立了悬架的三维模型,采用Pro/E与Adams之间的接口程序mech/pro将模型从Pro/E导入Adams,再进行动力学分析,模拟悬架在工作时各个部分的受力及运动状态,为进一步优化分析提供了依据。     

水稻直播机船底板下流体的数值模拟

利用有限元分析软件ANSYS中的计算流体动力学模块(FLOTRANCFD),对船底板下的流体进行模拟和分析,讨论在考虑形状损失和摩擦损失时,船底板下流体的流线和流动情况。通过对流体的仿真得出:船底板横挡板的前倾角对船底板下流体的流线和流量有较大的影响,并得出在倾角30o和60o时有较好的流动情况。     

油菜收获机清选装置虚拟样机的建模与仿真实验

针对油菜收获机清选装置的设计及改进过程中存在的各种问题,以DF-1.5型物料脱粒分离、清选仿真与控制试验台为原型,建立风筛清选装置的虚拟样机模型,并对不同机械系统工作参数下,油菜物料在清选装置中的运动规律进行初步的仿真研究。     

Evaluation of the RZWQM-CERES-Maize hybrid model for maize production

The root zone water quality model (RZWQM) was developed primarily for water quality research with a generic plant growth module primarily serving as a sink for plant nitrogen and water uptake. In this study, we coupled the CERES-Maize Version 3.5 crop growth model with RZWQM to provide RZWQM users with the option for selecting a more comprehensive plant growth model. In the hybrid model, RZWQM supplied CERES with daily soil water and nitrogen contents, soil temperature, and potential evapotranspiration, in addition to daily weather data. CERES-Maize supplied RZWQM with daily water and nitrogen uptake, and other plant growth variables (e.g., root distribution and leaf area index). The RZWQM-CERES hybrid model was evaluated with two well-documented experimental datasets distributed with DSSAT (Decision Support System for Agrotechnology Transfer) Version 3.5, which had various nitrogen and irrigation treatments. Simulation results were compared to the original DSSAT-CERES-Maize model. Both models used the same plant cultivar coefficients and the same soil parameters as distributed with DSSAT Version 3.5. The hybrid model provided similar maize prediction in terms of yield, biomass and leaf area index, as the DSSAT-CERES model when the same soil and crop parameters were used. No overall differences were found between the two models based on the paired t test, suggesting successful coupling of the two models. The hybrid model offers RZWQM users access to a rigorous new plant growth model and provides CERES-Maize users with a tool to address soil and water quality issues under different cropping systems.     

Inverse Modeling to Quantify Irrigation System Characteristics and Operational Management

Remotely sensed (RS) data is a major source to obtain spatialdata required for hydrological models. The challenge for thefuture is to obtain besides the more direct observable data(landcover, leaf area index, digital elevation model andevapotranspiration), non-visible data such as soilcharacteristics, groundwater depth and irrigation practices.In this study we have explore the option of using inversemodeling to obtain these non-RS-visible data. For a commandarea in Haryana, India, we applied for the 2000–2001 rabiseason a RS-GIS-combined inverse modeling approach to derivenon-RS-visible data required in the regional application ofhydrological models. A Genetic Algorithm loaded stochasticphysically based soil-water-atmosphere-plant model (SWAP) wasdeveloped for the inverse problem and used in the study. Theresults showed good agreement with the inventoried data suchas soil hydraulic properties, sowing dates, groundwaterdepths, irrigation practices and water quality. The deriveddata could be used to predict the state of the system at anytime in the cropping season, which can be used to evaluateoperational management strategies.     

Predicting effects of drainage water management in Iowa's subsurface drained landscapes

Long-term hydrologic simulations are presented predicting the effects of drainage water management on subsurface drainage, surface runoff and crop production in Iowa's subsurface drained landscapes. The deterministic hydrologic model, DRAINMOD was used to simulate Webster (fine-loamy, mixed, superactive, mesic) soil in a Continuous Corn rotation (WEBS_CC) with different drain depths from 0.75 to 1.20 m and drain spacing from 10 to 50 m in a combination of free and controlled drainage over a weather record of 60 (1945-2004) years. Shallow drainage is defined as drains installed at a drain depth of 0.75 m, and controlled drainage with a drain depth of 1.20 m restricts flow at the drain outlet to maintain a water table at 0.60 m below surface level during the winter (November-March) and summer (June-August) months. These drainage design and management modifications were evaluated against conventional drainage system installed at a drain depth of 1.20 m with free drainage at the drain outlet. The simulation results indicate the potential of a tradeoff between subsurface drainage and surface runoff as a pathway to remove excess water from the system. While a reduction of subsurface drainage may occur through the use of shallow and controlled drainage, these practices may increase surface runoff in Iowa's subsurface drained landscapes. The simulations also indicate that shallow and controlled drainage might increase the excess water stress on crop production, and thereby result in slightly lower relative yields. Field experiments are needed to examine the pathways of water movement, total water balance, and crop production under shallow and controlled drainage in Iowa's subsurface drained landscapes.     

基于Pro/E的播种机零部件参数化造型

针对旱作节水播种机设计中存在的设计手段落后、设计效率低下等问题，应用基于特征的参数化造型软件Pro/E对旱作节水播种机的零部件进行参数化造型，在对该类播种机开沟器、排种器、地轮等零部件的造型设计中探讨了技术要点，提高了旱作节水播种机修改设计和系列化设计的效率。     

基于Pro/E的装配体三维设计

介绍了使用Pro/E计算机软件作为计算机设计绘图工具，建立3D实体模型，然后根据零件间的位置关系将所涉及的零件逐个地进行装配；并简单阐述了其工程图的制作及齿轮三维造型的方法。     

日光温室蔬菜智能化管理系统建模

随着精准农业的发展,智能化管理将在现代农业中广泛应用。针对智能化管理在日光温室蔬菜生产中尚鲜见报道的情况,该研究以日光温室蔬菜为研究对象,通过对日光温室环境特征的分析,设计一种基于无线传感器网络技术的低成本温室监测系统,用于监测温度、湿度、二氧化碳浓度等关键环境参数,并建立日光温室蔬菜系统,通过建模,建立不同子模块,实现蔬菜生产的智能化管理。     

数据仓库逻辑建模的初步探讨

针对逻辑建模在数据仓库构建过程中的重要性,介绍了数据仓库创建的基本步骤,并利用实例深入而详细地研究了逻辑模型的设计,分析了几种逻辑模型的特点及其使用场合。