松香酰胺在中性造纸施胶中的应用

利用松香与异腈酸的酰经反应在１００－１５０℃下合成了三个松香酰胺，并应用它们到中性造纸松香乳酸，ＰＨ４－８的抄造试验表明这些松香衍生物在这个ＰＨ范围内具有高的施胶效果。松香酰结构与酰胺化度对施胶效果有很大的影响。     

Atmospheric lead and cadmium deposition within forests in the Kanto district, Japan

Atmospheric lead and cadmium deposition in bulk precipitation and throughfall was investigated at four forests in the Kanto district, Japan, to assess the impact of human activities on the environmental health of forests. Annual lead and cadmium depositions in bulk precipitation ranged from 8.9 to 25.7 g ha⁻¹ year⁻¹ and from 0.77 to 1.30 g ha⁻¹ year⁻¹, respectively. Lead and cadmium deposition increased in the summer at every forest due to large amounts of rainfall. At one of the forests, the depositions were also high in the winter due to heavy snowfall. These depositions were similar to recent depositions observed at other rural and urban sites in Japan and several forests in Europe and North America after 1990. These results indicate that although anthropogenic lead and cadmium are deposited at these rates over wide areas, depositions are still higher than in remote areas.     

Inoculation of fumigated nursery soil increases nodulation and yield of bare-root red alder (Alnus rubra Bong.)

To determine if inoculation increases nodulation and yield of bare-root red alder (Alnus rubra Bong.), fumigated nursery plots were treated with inoculum and ammonium sulfate (28 kg N ha^–1) in a factorial experiment. Inoculum was alder soil with 100 infective units of Frankia g^–1. Seedlings were evaluated for nodulation at age 10 wk and when lifted, at age 9 mo. Inoculation produced earlier and more extensive nodulation and increased seedling root collar diameter, height, and dry weight. Fertilization decreased seedling height, but did not decrease nodulation. No interaction of fertilization with inoculation was found. Inoculated unfertilized plots had the highest yield of packable seedlings (257 m^–2), and uninoculated fertilized seedlings had the lowest yield (126 m^–2).     

First report of trunk rot caused by <Emphasis Type="Italic">Fomitiporia torreyae</Emphasis> in Kyoto prefecture on cultivars of Japanese cedar with no relatedness to ‘Sanbu-sugi’

Trunk rot, caused by Fomitiporia torreyae, is one of the most economically important sap rot diseases on Cryptomeria japonica, especially on a cutting cultivar ‘Sanbu-sugi’. This disease had been reported only from Chiba and Ibaraki prefectures in Japan; however, a similar trunk rot on Japanese cedars was found recently in Kyoto prefecture. We identified the causal agent of the trunk rot on Japanese cedars in Kyoto prefecture, clarified the genotype of ‘Sanbu-sugi’ (sensu stricto) using microsatellite markers, and then investigated the relatedness of these infected cedars with ‘Sanbu-sugi’. The pathogen was identified as F. torreyae by its DNA sequences and morphological characteristics of the fruiting body. The 25 ramets of ‘Sanbu-sugi’ had only one genotype based on eight microsatellite loci. Infected Japanese cedars in Kyoto were comprised of different genotypes and showed no close relatedness to ‘Sanbu-sugi’. This is the first report of trunk rot caused by F. torreyae on cultivars of Japanese cedar with no relatedness to ‘Sanbu-sugi’ outside of Chiba and Ibaraki prefectures and showed the potential for expansion of this disease to Japanese cedar plantations in other areas.     

Automatic detection of washboarding in bandsaws

This paper presents an on-line method for detecting washboarding generated in bandsaws. It uses a parameter based on the shape of sawing force amplitude distributions. The curve of the probability density function of the parallel sawing force amplitude obeyed a normal distribution for the normal sawn surface, but it changed to an M-shaped distribution when washboarding appeared on the sawn surface of the workpiece. The curve of probability density function of the normal sawing force amplitude obeyed the normal distribution for any sawn surface investigated. The workpiece including a knot did not influence use of the parameter for detecting the appearance of washboarding.     

Vertical profiles of environmental factors within tropical rainforest, Lambir Hills National Park, Sarawak, Malaysia

Environmental factors, such as global solar radiation, wind speed, air temperature, humidity, and CO₂ concentration, were measured above and within the canopy of a tropical rainforest in Lambir Hills National Park, Sarawak, Malaysia. Few data concerning the environment of this forest have been reported. Intensive observations were carried out in 1998, 1999, and 2000 with the following results: (1) The fraction of global solar radiation reaching the upper layer of the canopy varied with global solar radiation above the canopy. Even though the global solar radiation above the canopy fluctuated, the fraction of that reaching the lower canopy and the ground was constantly approximately 5%. (2) The fraction of wind speed reaching each layer of the canopy increased with wind speed above the canopy. Little wind was usually present at the lower canopy. (3) The daytime air temperature at the canopy top was higher than that near the ground. The maximum difference between the air temperature at the canopy top and that at the ground was about 5°C, and the diurnal temperature ranges at the canopy top and those at the ground were about 8°C and about 5°C, respectively. The highest daytime water vapor pressure occurred within the canopy and particularly near the ground. Vertical gradients of water vapor pressure during the day were steep, probably because of high transpiration. (4) In the 1998 observation the minimum and the maximum CO₂ concentrations were 360 ppm in the day and 450 ppm at night, while in the 2000 observation the minimum and the maximum CO₂ concentrations were 350 ppm in the day and 540 ppm at night. The higher CO₂ concentration in the daytime and the lower concentration at night observed during the 1998 observation period were probably due to reduced photosynthesis and soil respiration caused by exceptional dry conditions during the observation period.     

Temporal and spatial dynamics of an old-growth beech forest in western Japan

Dendrochronological approaches enable us to understand forest stand dynamics by estimation of disturbance history and age structure. The present study was conducted in an old-growth beech forest in a forest reserve in western Japan. Increment cores were taken for tree ring analysis from all canopy trees in a 50 m × 130 m study plot. Radial growth release criteria were developed to identify significant growth releases in each tree ring series and to characterize the disturbance history of the study site. The age structure of the forest was indicative of continuous establishment by Fagus crenata and simultaneous establishment by Magnolia obovata. A variety of low-intensity disturbances were identified in each decade, especially after the 1900s, but the occurrence of high-intensity catastrophic disturbance was rare, and likely played an important role in maintaining species diversity in the existing forest canopy. The results also suggest that F. crenata regenerates gradually before and after both large- and small-scale disturbances, whereas M. obovata and Betula grossa regenerate only after large-scale catastrophic disturbances.     

High-speed steel tool wear during wood cutting in the presence of high-temperature corrosion and mineral contamination

Dulling of high-speed steel (HSS) cutting tools after milling five wood species has been analyzed. The wood investigated varied in mineral contamination, high-temperature corrosivity (HTC) and density (D). Experiments performed proved that up to date methods for evaluation of mineral contamination in wood should be improved. A new pipe-like form of mineral contamination particles was evidenced. The correlation between the presence of 3D aggregates of silica in wood and high content of K and Ca in the ash was established. Employing multivariable theoretical simulation method, the combined effect of mineral contamination, HTC and wood density on the tool dullness appeared to be a reasonable explanation of the results obtained.     

Simple method for synthesizing phenolicβ-O-4 dilignols

A modified synthetic method for phenolic-O-4 lignin substructure model dimers was developed involving protection of the phenolic hydroxyl group of acetophenons with benzoyl chloride, bromination with 4-dimethylaminopyridiniumbromide perbromide, condensation with phenols in the presence of 18-crown-6-ether, condensation with paraformaldehyde, reduction with NaBH₄ and debenzoylation. This method results in shorter reaction times and increasing yields without the application of strict anhydrous and drastic conditions or chloric solvents. This alternative route could be applied to the-O-4 dilignol syntheses of four combinations of guaiacyl and syringyl derivatives.