Development and Implementation of a Forest Nursery Accreditation Policy at a Local Level in Leyte, Philippines

Through a series of workshops with the stakeholders including nursery operators, tree farmers, staff of the Department of Environment and Natural Resources, local government units and the academe, a forestry seedling nursery accreditation policy was developed. The resulting policy was subsequently implemented by the municipal government of Palompon, Leyte. The accreditation policy encouraged nursery operators to follow smallholder-based best management practices for tree nurseries. Implementation of the nursery accreditation policy improved farmers’ knowledge and skills in the production of high quality seedlings, encouraged adoption of BMP for forest nurseries, provided additional source of income for the farmers, enabled members of the groups operating the communal nursery to forge closer relationship with each other, encouraged utilization of farmers’ free time in productive activities, developed farmers’ confidence in producing high quality planting materials, and gained for the farmers favourable attention from various organizations and groups. The Bennett’s hierarchy of project outcomes showed that the implementation of accreditation scheme achieved high levels of outcomes, indicating that it led to substantial improvements in the lives of the farmers.     

Comparison of stand dynamics after dieback caused by pine wilt disease among pine forests with different management regimes in western Japan

In pine forests damaged by pine wilt disease, in western Japan, the effect of protection regimes of pine trees on the stand dynamics were examined in the following four stands: (1) lightly damaged stand (age 30–40 years) with no procedure in operation for protecting pine trees; (2) severely damaged stand (age 30–40 years) with no procedure in place for protecting pine trees; (3) severely damaged stand (age 50 years) with a selective cutting of infected trees; (4) severely damaged stand (age 30–40 years) with a selective cutting of infected trees. All the stands had been abandoned before the pine wilt disease damage. The understory structure of the severely damaged stand with no protection procedure was similar to that of the lightly damaged stand. Frequent invasion by tree species and acceleration in the growth of understory trees occurred after the dieback in the selective cutting stand. These results suggest that a deficiency in the canopy layer caused by the dieback resulted in low disturbance intensity in the early stages after the dieback, but the selective cutting increased the intensity by the reduction in the understory as well as the canopy layer. The intensity of the disturbance in the selective cutting stands was larger in the younger stand because it had a higher density of selectively cut pine trees. The different stand structure of pine forests occurred after the dieback because the intensity of the disturbance varied as a result of the selective cutting operation and the stand age.     

Compressive and tensile properties of a butt-jointed lamination model

A study was undertaken to evaluate the effect of glue application and placement of butt-joints on the compressive and tensile properties in a butt-jointed lamination. The aim was to provide background information for producing butt-jointed, glued, laminated timber. Three butt-jointed lamination models were prepared from spruce-pine-fir (S-P-F) dimension lumber with glued and nonglued butt joints, with different placements of the butt joints in the models. The axial stiffness and strength properties were assessed using both compressive and tensile tests. The results of the study indicated that for the compressive lamination model the application of glue at the butt joint gave more stiffness than the nonglued butt joint. Neither glue application nor placement of the joint had a statistically significant effect on the compressive strength. There were no significant differences between the glued and nonglued butt joint for either tensile strength or stiffness.     

Coffee agroecosystem performance under full sun, shade, conventional and organic management regimes in Central America

Changes in coffee economics are leading producers to reduce agrochemical use and increase the use of shade. Research is needed on how to balance the competition from shade trees with the provision of ecological services to the coffee. In 2000, long-term coffee experiments were established in Costa Rica and Nicaragua to compare coffee agroecosystem performance under full sun, legume and non-legume shade types, and intensive and moderate conventional and organic inputs. Coffee yield from intensive organic production was not significantly different from intensive conventional in Nicaragua, but in Costa Rica it was lower during three of the six harvests. Full sun coffee production over 6 years was greater than shaded coffee in Costa Rica (61.8 vs. 44.7 t ha^?1, P = 0.0002). In Nicaragua, full sun coffee production over 5 years (32.1 t ha^?1) was equal to coffee with shade that included Tabebuia rosea (Bertol.) DC., (27?C30 t ha^?1) and both were more productive (P = 0.03) than coffee shaded with Inga laurina (Sw.) Willd. (21.6 t ha^?1). Moderate input organic production was significantly lower than other managements under all shade types, except in the presence of Erythrina poepiggina (Walp.) O.F. Cook. Inga and Erythrina had greater basal area and nutrient recycling from prunings than other shade species. Intensive organic production increased soil pH and P, and had higher K compared to moderate conventional. Although legume shade trees potentially provide ecological services to associated coffee, this depends on management of the competition from those same trees.     

Manufacture and mechanical properties of binderless boards from kenaf core

Binderless boards were prepared from finely ground powders of kenaf (Hibiscus cannabinus L.) core under varying manufacturing conditions. This research was designed to investigate their mechanical properties and evaluate the various manufacturing conditions: pressing temperature and time, pressing pressure, board density, board thickness, grain size of raw materials, and addition of furfural. The mechanical properties (i.e., modulus of rupture and elasticity, internal bonding strength) of boards increased with increasing board density and met the requirement for 15 type medium-density fiberboard (MDF) by JIS A 5905-1994. Thickness swelling and water absorption of boards exceeded the maximum permitted levels for 15 type MDF and S20 grade hardboard by JIS A 5905-1994, which indicates the low water-resistant property of binderless boards. In contrast to that in usual wood-based materials, internal bonding strength showed significant correlations with other board properties: modulus of rupture and elasticity, thickness swelling, and water absorption. We confirmed experimentally that the best manufacturing conditions proved to be as follows: pressing temperature 180°C, time 10min; pressing pressure 5.3MPa; board thickness 5mm; board density 1.0g/cm³; average grain size 53µm; and powder with no furfural content.Part of this paper was presented at the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, April 2002     

Application of a modified rate equation to the acetylation of wood

A modified rate equation, in which the diffusion of reagent was taken into consideration, was proposed and applied to results reported previously for the acetylation of wood. The equation was fitted more successfully to the prolonged as well as the early stage of the reaction than a common first-order rate equation. Although the conclusions were virtually unchanged, the reliability was enhanced because reaction parameters such as the rate constant, ultimate extent of the reaction, and activation energy calculated for the modified equation were based on much more data than those reported previously. The equation proposed here may be applicable not only to acetylation but to other chemical modifications of cellulosic materials in heterogeneous systems.     

Dynamic excitation and static loading tests of glulam lattice floor

A wooden lattice floor with high stiffness and damping capacity has been developed to solve noise problems in wooden apartment houses. The lattice floor consisted of Douglas fir glulam beams with inserted steel plate joints and drift pins. To examine the structural performance of the floor, dynamic excitation and static loading tests were conducted on the full size floor. The first and second order resonance frequencies of the floor were 13.5Hz and 27.0Hz, respectively. These frequencies are similar to the peak frequency of a conventional wooden floor and the combined floor fabricated from glued laminated timber and iron. The maximum static load of the floor was 127kN. The apparent flexural rigidity was less than half the value of several floors studied in the past. However, it is considered that the stiffness is improved by constructing panels and this floor has almost equivalent performance. Relative deflection was not affected by the loading history.Part of this study was presented at the International Wood Engineering Conference, New Orleans, October 1996.     

Leaf-litter decomposition of 15 tree species in a lowland tropical rain forest in Sarawak: dynamics of carbon,nutrients, and organic constituents

The effects of tree species on the dynamics of nutrient transformations during leaf-litter decomposition are not well understood in tropical rain forests. To examine differences in the dynamics of C, nutrients, and organic constituents during decomposition among tree species, the leaf-litter decomposition of 15 trees was assessed using a litter-bag method in a lowland tropical rain forest in Sarawak. The dynamics of C was parallel to that of weight loss. The dynamics of nutrients were grouped into three patterns. The dynamics of K was characterized by a high leaching loss in the initial stages, and that of Ca and Mg generally showed a gradual decrease over the course of decomposition. The dynamics of N and P showed highly different patterns with the weight loss, and was characterized by relatively higher remaining mass at the end of the experiment. The variations or exceptions of nutrient dynamics among tree species were considered to be related to the initial concentration of each nutrient. For the dynamics of organic constituents, water-soluble carbohydrates disappeared quickly at the initial stages, and acid-soluble carbohydrates were the second fastest decomposing fraction; the decomposition of acid-insoluble residue (AIS) was the slowest. The release of limiting nutrients (N and P) generally followed the disappearance of AIS, but was independent of the disappearance of AIS when the initial concentrations of these nutrients were very low.     

Solubility of kraft lignin-<Emphasis Type="Italic">g</Emphasis>-polyacrylonitrile copolymer in various ionic liquids and characterization of its solution

Lignin is a potential precursor for low-cost carbon fiber production, but it is difficult to spin and spool lignin because of its complex and interconnected molecular structure. This disadvantage can be overcome by introducing g-polyacrylonitrile (PAN) to lignin. However, the resulting copolymer is insoluble in common organic solvents. In this study, kraft lignin (KL)-g-polyacrylonitrile copolymers with different KL/PAN proportions were prepared via atom transfer radical polymerization (ATRP) method and their solubility in ionic liquids (ILs) was investigated at different temperatures. 1-Ethyl-3-methylimidazolium acetate ([EMIM]Ac), 1,3-dimethylimidazolium methyl sulfate ([MMIM]MeSO4), 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), and 1-butyl-3-methylimidazolium bromide ([BMIM]Br) were used as the ILs. At all investigated temperatures, the highest solubility of KL-g-PAN was observed in [EMIM]Ac, with the order of [MMIM]MeSO4 > BMIM]Br > [BMIM]Cl. The solubility in BMIM]Br and [BMIM]Cl was remarkably low, reaching values of less than 4 g/Kg. The viscosity and surface tension of the KL-g-PAN/[EMIM]Ac solution increased and decreased, respectively, with increasing amounts of PAN and further by the addition of dimethylformamide (DMF) to the solution. FTIR spectra of KL-g-PAN copolymers before and after dissolution suggested that PAN was partially depolymerized from the copolymer during the dissolution process.