Removal of trichloroethylene from aqueous solution by pyrolyzed Japanese cedar bark

The bark of Japanese cedar (Cryptomeria japonica D. Don) was heated in an N₂ atmosphere at 300–900C for 3h to investigate the surface properties of the pyrolyzed residuces and their ability to remove trichloroethylene (TCE) from aqueous solutions. The specific surface areas (S _N) and total pore volumes (V _N) of the pyrolyzed barks steadily increased with rising pyrolysis temperature; no significant differences in the average pore diameters (D _N) were observed at higher temperatures (600–900C). The adsorption capacities of the pyrolyzed residues for TCE were determined under batch mode conditions using an aqueous solution containing 500g TCE dm^–3. The adsorption data were well fitted to the Freundlich equation. The adsorption capacity of the bark pyrolyzed at 900C was about five times larger than that of commercial activated carbon.This study was presented at the 10th International Symposium on Wood and Pulping Chemistry, Yokohama, June 1999     

Rapid production of high-strength cement-bonded particleboard using gaseous or supercritical carbon dioxide

This study deals with the effects of curing treatment with gaseous and supercritical carbon dioxide on the properties of cement-bonded particleboard (CBP) manufactured by the conventional cold-pressing method. The hydration of cement and the mechanism of improvement were examined using X-ray diffractometry (XRD), thermal gravimetry (TG-DTG), and scanning electron microscopy (SEM) observations. The results are as follows: (1) The curing of cement was accelerated concomitantly with the improvement in mechanical and dimensional properties of CBP significantly by curing with gaseous or supercritical carbon dioxide. (2) Supercritical carbon dioxide curing imparted boards optimal properties at a faster rate than did gaseous curing. (3) Accelerated formation of calcium silicate hydrate and calcium carbonate and the interlocking of those hydration products on the wood surface are potentially the main reasons for the superior strength of carbon dioxide-cured boards.     

Chemical changes in steam-pressed kenaf core binderless particleboard

The effects of chemical changes in kenaf core binderless particleboards on the bonding performance and thickness swelling of boards were investigated by chemical and spectroscopic analyses. Mild steam-injection treatments (0.6–1.0MPa) caused significant degradation of hemicelluloses, lignin, and cellulose. Conventional hot pressing caused a lower degree of degradation of the chemical components. The hot-pressed kenaf core board without any binders showed poor bonding performance. Thus, it was found that partial degradation of the three major chemical components of the kenaf core by mild steam-injection treatment increased the bonding performance and dimensional stability of the binderless boards, and gave better quality binderless boards than those made by hot-pressing treatments.Part of this report was presented at the 4th International Wood Science Symposium, Serpong, Indonesia, September 2002; and at the 53rd Annual Meeting of The Japan Wood Research Society, Fukuoka, March 2003     

Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.     

Fire-resistant performance of a laminated veneer lumber joint with metal plate connectors protected with graphite phenolic sphere sheeting

Creep under fire of laminated veneer lumber (LVL) joined with metal connectors was studied. The fire-resistant performance of LVL butt joints connected with metal plates protected with graphite phenolic sphere (GPS) sheeting was discussed. The GPS sheeting was overlaid on the joint in different sizes and locations. The joint was exposed to a burner with a top flame temperature of 800°C and loaded with a load of 200 N to test for creep under fire. The results showed that the fire-resistant performance of the joint was markedly improved by the sheeting. The size and location of the GPS sheet significantly affected the time to rupture of the specimen, which was six times longer than that without GPS. Temperature measurements at the joint showed that the GPS sheeting distributed the heat along the surface and delayed failure. Thermographic images and analyses clarified the improvement in fire-resistant properties due to GPS.     

Effects of high temperature kiln drying on the practical performances of Japanese cedar wood (Cryptomeria japonica) I: changes in hygroscopicity due to heating

The effect of heating on the hygroscopicity of Japanese cedar wood was investigated as a simple evaluation of thermal degradation in large-dimension timber being kiln-dried at high temperatures (>100°C). Small wood pieces were heated at 120°C in the absence of moisture (dry heating) and steamed at 60°, 90°, and 120°C with saturated water vapor over 2 weeks, and their equilibrium moisture contents (M) at 20°C and 60% relative humidity (RH) were compared with those of unheated samples. No significant change was induced by steaming at 60°C, while heating above 90°C caused loss in weight (WL) and reduction in M of wood. The effects of steaming were greater than those of dry heating at the same heating temperature. After extraction in water, the steamed wood showed additional WL and slight increase in M because of the loss of water-soluble decomposition residue. The M of heated wood decreased with increasing WL, and such a correlation became clearer after the extraction in water. On the basis of experimental correlation, the WL of local parts in large-dimension kiln-dried timber was evaluated from their M values. The results indicated that the thermal degradation of inner parts was greater than that of outer parts.     

Changes of decay and termite durabilities of Japanese larch (Larix leptolepis) wood due to high-temperature kiln drying processes

We investigated the effects of high-temperature drying schedules (120°–130°C) on decay and termite feeding of Japanese larch timbers. Thermogravimetric analysis was conducted to investigate changes of the wood components. Decay and termite feeding tests showed that specimens dried under high-temperature schedules were susceptible against a decaying fungus Fomitopsis palustris and attacks from termites Coptotermes formosanus and Reticulitermes speratus. These drying schedules changed chemical components, which were suggested by the thermal analytical result compared to the control sample. The results of this study indicated that the acceleration of termite feeding takes place even under temperatures that are comparatively lower than that used in our previous research in which 170°C steaming treatment was applied to Japanese larch wood. Decay durability against a brown rot fungus also decreased, possibly from production of low molecular weight fragments when hemicellulose decreased during the high-temperature drying processes.     

Fire protection of a laminated veneer lumber joint by wood carbon phenolic spheres sheeting

Laminated veneer lumber joints made with metal plate connectors were protected with wood carbon phenolic spheres (CPS) sheeting and tested for creep under fire. The effects of the carbonizing temperature of charcoal, used as raw material for the CPS sheets, the thickness, and the location of the sheet on the joint regarding the fire-resistance performance of the joint were studied. The time to rupture of the joints covered with CPS sheets made from charcoal carbonized at 800°C (CPS800) was slightly prolonged compared with that of uncovered joints. On the other hand, the time to rupture of CPS sheets made from charcoal carbonized at 1600°C (CPS1600) was markedly extended. The changes in the charcoal properties due to increasing the carbonizing temperature might be the main reason the CPS1600 sheets had higher fire-resistance performance. The thickness and location of CPS1600 sheets have significant effects on the fire resistance of the joint. A highly fire-resistant laminated veneer lumber joint was obtained using a CPS1600 sheet. The CPS1600 sheet with a thickness of 3mm covering three sides of the joint prolonged the time to rupture 16-fold compared with that of unprotected joints.Part of this paper was presented at the 4th International Wood Science Symposium, Serpong, Indonesia, September 2002     

The critical stress in various stress levels of bending member on fire exposure for mechanical graded lumber

This study focused on the relationship between stress level and the fire resistance of structural lumber. The 210 samples were prepared from 15-year-old trees of Acacia mangium from the Forest Estate Plantation, Indonesia. Specimens were 20 ® × 20 (T) × 500mm (L) and were air-dried. Sixty samples were tested under four-point bending stress to obtain the modulus of elasticity (MOE) and the modulus of rupture (MOR) for classifying the stress grades of the remaining 150 samples. The tests were performed using a four-point load bending position at various stress level while the specimens were exposed to fire along the shear-free region. Time to failure was affected by the stress levels in an exponential trend. Despite changes in stress level, charring rate, and time to failure, the critical stress of a member from the same species was similar. The fire performance under applied load could be predicted by using simplified fire-testing methods. The developed testing apparatus is valid for evaluating the small-scale fire resistant behavior of structural lumber in bending.     

Bone morphological analyses in Spontaneously Diabetic Torii (SDT) fatty rats

The Spontaneously Diabetic Torii (SDT) fatty rat, a model for obese type 2 diabetes, shows bone quantitative abnormalities, namely low bone mineral density (BMD). The objective of this study was to evaluate bone morphological changes, in particular identifying the bone qualitative abnormalities, in the SDT fatty rat. Male SDT fatty rats showed increases in total trabecular area and trabecular number and decreases in trabecular thickness in cancellous bones of the proximal tibia, indicating trabecular miniaturization. The SDT fatty rat is useful for investigation of pathophysiological changes in bone quality in diabetic osteoporosis.