Utilization of biochar impregnated with anaerobically digested slurry as slow‐release fertilizer

We examined the possibility of an environment‐friendly slow‐release fertilizer (SRF) made of biochar impregnated by anaerobically digested slurry. The biochar materials were produced from three types of feedstocks (orange peel, residual wood, water‐treatment sludge) at different temperatures of 300°C, 500°C, and 700°C via pyrolysis. The release behaviors of the water‐soluble K⁺, Ca²⁺, and Mg²⁺ were similar for all impregnated biochars and the commercial SRF used. The water‐retention capacity was greatly improved by mixing the biochar‐SRF with the soil. The yield of lettuce was lower for the biochar‐SRF applications of 3.7 to 34.2 t ha^–1 than for the commercial SRF application of 51.4 t ha^–1. This might be due to excessive increase of soil pH for the biochar‐SRF application. Based on these results, the authors concluded that the biochar impregnated with nutrients could become an effective slow‐release K⁺ fertilizer.     

Comparing the value of Southern Oscillation Index-based climate forecast methods for Canadian and US wheat producers

Southern Oscillation Index (SOI) based forecasting methods are compared to determine which method is more valuable to Canadian and US wheat producers. Using decision theory approach to valuing information, the more commonly used three-phase method of El Niño, La Niña, and other is compared to a five-phase system. Because of differences in growing season and yearly SOI classification schemes, two different three-phase methods are used. The five-phase system is based on the level and rate of change of the SOI over a 2 month period. Phases are consistently negative, consistently positive, rapidly falling, rapidly rising, and near zero. As expected, results vary by the method used. Winter wheat producers in Illinois place no value on either of the SOI-based forecasting systems. Producers at seven of the 13 sites prefer the five-phase method over either of the three-phase method (spring wheat producers in Manitoba, Alberta, North Dakota and South Dakota, along with winter wheat producers in Oklahoma, Texas, and Washington). The value of the five-phase approach is up to 70 times more valuable than the three-phase approach. Producers growing spring wheat in Saskatchewan and Montana, along with winter wheat producers in Ohio and Kansas value the three-phase approach more than the five-phase. In this case, the value of the three-phase system is up to two times more valuable than the five-phase system. Depending on expected price and region, the values of the SOI-based forecasts range from 0 to 22% of the value of perfect forecasts. In both absolute and percentage of perfect forecasts, producers in Oklahoma, Texas, Manitoba, Saskatchewan, and South Dakota value either system more than producers in the remaining regions. Economic value and distributional aspects of the value of climate forecasts have implications for producers, policy makers, and meteorologists. Finally, the results clearly suggest all producers will not prefer one forecast type. Forecasts need to be tailored to specific regions.     

The potential aboveground carbon storage of north American forests

To assess the possibility of using C offset as a method of sequestering CO₂ produced by the burning of fossil fuels, it is necessary to have accurate estimates of C reservoirs and fluxes. Recent studies have shown that estimates of C commonly used in the past are too large, and this may lead to confusion about the global C budget. Field data used in recent estimates of present C storage for the North American boreal and eastern deciduous forest biomes were reanalyzed to estimate their maximum potential C storage. The original data were collected using a stratified two-stage cluster survey sampling design. The reanalysis suggests that the boreal forest and eastern deciduous forest could sequester possibly as little as 13.4% (3.0 Pg) and 18.5% (1.5 Pg), respectively, more C than they presently store. These estimates represent the potential increase in C storage under present conditions, if the study areas were allowed to revert back into forests.     

Development of an enzyme-linked immunosorbent assay for the pyrethroid cypermethrin

A competitive enzyme-linked immunosorbent assay (ELISA) for the detection of cypermethrin was developed. Two haptens, the trans- and cis-isomers of 3-[(+/-)-cyano-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarbonyloxy]methyl]phenoxyacetic acid, were conjugated with thyroglobulin as immunogens. Four antisera were generated and screened against six different coating antigens. The assay that was the most sensitive for cypermethrin was optimized and characterized. The IC(50) for cypermethrin was 13.5 +/- 4.3 microg/L, and the lower detection limit (LDL) was 1.3 +/- 0.5 microg/L. This ELISA had relatively low cross-reactivities with other major pyrethroids, such as deltamethrin, phenothrin, resmethrin, fluvalinate, and permethrin. Methanol was found to be the best organic cosolvent for this ELISA, with an optimal sensitivity observed at a concentration of 40% (v/v). The assay parameters were unchanged at pH values between 5.0 and 8.0, whereas higher ionic strengths strongly suppressed the absorbances. To increase the sensitivity of the overall method, a C(18) sorbent-based solid-phase extraction was applied to various domestic and environmental water samples. The water samples, fortified with cypermethrin, were analyzed according to this method. Good recoveries and correlation with spike levels were observed.     

Phenolic acids, lipids, and proteins associated with purified corn fiber arabinoxylans

Corn fiber gum (CFG) is a hemicellulose (arabinoxylan)-enriched fraction obtained by the extraction of corn bran/fiber using a proprietary alkaline hydrogen peroxide process. When purified CFG prepared by this process was hydrolyzed with more concentrated base (1.5 N methanolic KOH at 70 degrees C for 1 hour), considerable amounts of hydroxycinnamic acids (up to 0.015% of mainly ferulic acid) and lipids (up to 0.43%) were released. The released phenolic acids and lipids were identified and quantified using high-performance liquid chromatography (HPLC) with detection by both UV and evaporative light-scattering detection (ELSD). During the wet milling of corn, two types of corn fiber are produced: coarse fiber, which is primarily from pericarp, and fine fiber, which is from the endosperm. The total phenolic acid content in CFGs purified from coarse corn fiber (pericarp fiber) is comparatively higher than that purified from fine corn fiber (endosperm fiber). It was also determined that the purified CFG samples contained significant amounts of strongly associated proteins, from 2 to 5% by weight. The presence of these phenolic acids, lipids, and proteins strongly associated or bound to CFG may contribute to its excellent ability to emulsify oil-in-water emulsions.     

The dissipation of tebuconazole and propiconazole in boronia (Boronia megastigma Nees)

The broad spectrum, systemic fungicides tebuconazole and propiconazole are used to control rust in boronia (Boronia megastigma Nees). Gas chromatography combined with either a benchtop quadrupole mass spectrometer or a high-resolution mass spectrometer allowed for the monitoring of both pesticides in boronia leaves, flowers, and concrete. Field trials were established at two sites to determine the rate of dissipation of tebuconazole and propiconazole in boronia. At site 1, two application rates of 125 and 250 g active ingredient/hectare (ai/ha) tebuconazole were employed. Treatments were repeated 17 days later. At harvest, 286 days after the final application, tebuconazole was detected at levels of 0.06 +/- 0.05 and 0.5 +/- 0.1 [mg/kg +/- standard error, on a dry matter basis (DMB)] in the leaves collected from plots treated with 125 and 250 g ai/ha of tebuconazole, respectively. The oil produced from the flowers collected at the final harvest had residues of tebuconazole at levels of 0.06 +/- 0.03 and 0.10 +/- 0.08 mg/kg for the 125 and 250 g ai/ha application rates, respectively. Two repeat applications of 125 g ai/ha propiconazole were also used at site 1. Residues of propiconazole were detected at 0.09 +/- 0.03 mg/kg (DMB) 286 days after the final application. At site 2, treatments of 125 g ai/ha of tebuconazole were applied twice. At harvest, 279 days after the final application of tebuconazole, residues were recorded at 0.30 +/- 0.09 mg/kg in the leaves (DMB) while the oil produced had 0.20 +/- 0.07 mg/kg.     

Organobentonite for Sorption and Degradation of Phenol in the Presence of Heavy Metals

An experimental study was performed to determine the feasibility of usingorganobentonite modified with quarternary ammonium cations (QACs) as a reactive medium in immobilization and biodegradation barriers for mixed contaminants in the subsurface soil. Various factors, including interactions between heavy metals, organic contaminants, and soil microorganisms, were investigated when they coexisted with untreated bentonite and organobentonite. Batch sorption tests for cadmium and lead were conducted to quantify sorption selectivity of these metals on untreated bentonite and organobentonite. Metal concentrations of 50 × 10^-6 M slightly reduced the growth of soil microbes and partially interfered with the biodegradation of phenol. Soil microorganisms tested with untreated bentonite grew after approximately 25 hr of lag period and degraded phenol completely within 350 hr. The results from this study demonstrate that organobentonite could be used as a reactive medium for immobilization and biodegradation of organic contaminants in the presence of heavy metals in the subsurface soil.     

Evaluation of sewage sludge-based compost by FT-IR spectroscopy

The aerobic batch composting fermentations of sewage sludge with wood chips and maturity compost as co-composting additives were carried out in an open type lab-scale reactor. Fourier transform infrared spectroscopy (FT-IR) spectroscopy was used to monitor the composting process, evaluate the degradation rate and thus determine the maturity. Although the composition of the input mixture strongly affects the shape of the infrared (IR) spectra, typical bands of components can be selected and used to follow the composting process.

The appearance, shape and intensity of the nitrate band at 1384 cm^− 1 was well pronounced and evident for a sewage sludge-based compost maturity. An increase of the peak ratio 1384 / 2925 and decrease of 2925 / 1034, 1034 / 1384 correlated with the degree of decomposition. For the composting mixture under study the peak ratios 1034 / 1384 and 1384 / 2925 were more demonstrative. Considering the influence of the composting mixture (components and their ratio) on the shape of the FT-IR spectra the nitrate band at 1384 cm^− 1 can be overlapped by other absorption bands (e.g. lignin bands in 1300–1400 cm^− 1 region) thus appearing in the spectra as a shoulder, and therefore the ratios 1384 / 2925 and 1034 / 1384 become unusable to evaluate the maturity.

FT-IR spectroscopy is a quick and useful method to monitor the composting process; however any particular composting mixture needs preliminary studies of the spectra. Consequently, the most appropriate criteria describing the process (e.g. band ratios, shape and intensity of nitrate band) should be selected and the time / peak ratio curves recorded for a compost mixture under study. Afterwards monitoring of the composting process can be based on the comparison of the controls and definite samples.     

Cadmium Accumulation and Tolerance of Two Salix Genotypes Hydroponically Grown in Presence of Cadmium

Abstract

In general, according to previous studies, pioneer species do not require arbuscular mycorrhizal fungi (AMF) to increase their growth and survival in tropical systems. The aim of this study was to determine the dependence response to AMF of Heliocarpus appendiculatus, a pioneer species, at different phosphorus (P) levels. In a greenhouse experiment, H. appendiculatus seedlings were grown in pots with a sterile vermiculite-sand mixture (1:1). Two sets of pots were set up: One set was inoculated (150 spores per pot) with indigenous AMF from a tropical rain forest at “Los Tuxtlas” (Veracruz, Mexico); the other set was not inoculated. To each set, 0, 0.02, 0.2, and 2 g L^?1P was added. All pots were watered with 250 mL of nutrient solution. Mycorrhizal plants showed a higher total dry weight and relative growth rate in 0.02 g L^?1P concentration, while nonmycorrhizal plants responded positively at 0.2 g L^?1P; a decrease in plant responses at higher P levels was observed in both treatments. H. appendiculatus showed to have higher relative dependence at lower P concentration (≈50%). As levels of P increased, mycorrhizal colonization decreased. Successful growth of pioneer species during succession process may be improved if there is AMF content in soils, prior to disturbance.