传染性法氏囊病病毒变异E株对法氏囊生长发育的影响

本试验全面而系统地观察了传染性法氏囊病病毒变异Ｅ株,通过泄殖腔、鼻腔和尿囊腔接种雏鸡和鸡胚后不同时间法氏囊的组织形态学变化。结果表明,病毒感染后１２～４８小时,雏鸡法囊粘膜上皮细胞肿胀、坏死脱落,淋巴滤泡髓质部及皮质部淋巴细胞不同程度变性、坏死、排空,形成腺管样结构或囊状空泡,接毒后７２～１４４小时,法氏囊淋巴滤泡淋巴细胞坏死排空,淋巴滤泡萎缩,网状结缔组织大量增生,而胚胎发育时期,法氏囊粘膜上皮肿胀变性,法氏囊淋巴滤泡形成延迟或不完整,淋巴滤泡内淋巴细胞缺乏或空虚。探讨了传染性法氏囊病病毒对胚胎发育时期的雏鸡发育时期法氏囊生长发育的影响。     

桑叶粉对蛋鸡生产性能及蛋品质的影响

选用2 000只300日龄的海兰褐产蛋鸡研究桑叶粉对蛋鸡生产性能和蛋品质的影响.试验鸡随机分为4组,各组分别在全价料中添加0、3%、5%、7%的桑叶粉配成营养成分相近的配合饲料,试验期为30 d.结果表明:添加5%以内的桑叶粉时蛋鸡的生产性能及蛋品质与对照组均没有显著差异,而添加7%的桑叶粉时蛋鸡采食量、产蛋量和产蛋率则低于对照组.添加5%的桑叶粉显著提高了鸡蛋的蛋黄色泽,而对鸡蛋的哈夫单位、蛋壳质量及鸡蛋的脂肪酸、维生素E、胆固醇含量等指标均没有显著影响.     

The role of toll-like receptors in the pathogenesis of Streptococcus suis

Streptococcus suis is an important agent of swine and human meningitis. Sequence type (ST) 7 emerged in China and was responsible for the human epidemic caused by S. suis in 2005. The virulence of S. suis ST7 is greater than the wild type pathogenic S. suis, ST1; however, the mechanisms for this increased pathogenicity are unknown. The aim of this study was to determine the role of different toll-like receptors (TLRs) involved in regulating the host response to the S. suis infection and to speculate on differing mechanisms used by ST7 strains to induce disease. Here we compared two ST7 strains isolated in the 2005 Sichuan outbreak to two ST1 strains. Our data show TLR2, 6 and 9 are involved in the recognition of heat-killed S. suis independent of the ST type. We found the TLR-dependent cytokine production differed between the two types of strains using whole cell lysate proteins. TLR6 played a greater role in cytokine production induced by the whole cell lysate proteins from the ST7 strain than in that induced by the ST1 strain lysates. The data suggest that mechanisms of inflammation induced by S. suis strains differ where this will be useful in designing efficient strategies in combating streptococcal toxic shock-like syndrome caused by the S. suis ST7 strains.     

湖南长沙市病死畜禽无害化处理监管分析

为做好病死畜禽无害化处理工作,长沙市全面开展动物无害化处理体系建设,加强信息化监管平台建设,积极推动地方立法,严厉打击违法行为,探索建立病死动物无害化处理长效监管机制。本文通过概述长沙市病死畜禽无害化处理工作现状,分析了长沙市现有动物无害化处理体系建设情况,包括动物无害化处理中心、收集转运中心、收集暂存点和无害化处理点等。指出了当前存在的监管难度大,养殖保险未全覆盖,补助机制不完善,相关法律法规不健全等问题,由此提出加大财政支持力度,实现养殖保险全覆盖,完善无害化处理补助机制,推动出台相关法律法规,厘清责任分工等思考建议。     

5HP-25型粮食干燥机设计与试验

为了提高干燥系统的能量利用效率,增强干燥机的通用性、可靠性、作业效率和年利用率,该研究围绕增大干燥动力系数和工艺能力指数,基于粮食的物性特征,从干燥工艺方式、机械结构参数和运动参数间的内在关系入手,把几何因子和运动参数有机结合,揭示了粮食在干燥机内流动特性;按照引风降压,连续闪蒸降温,强化传热传质,自适应排粮的设计思想,研制了一款粮食通用的干燥机,实现了粮食在干燥机内连续流动过程中,自发地改变流态、连续回转换位,强化了传热传质,改善了干燥的均匀性。设计的升角为6°的变截面角状盒,与传统的横流方法相比,可使干燥动力系数增大2～4倍,干燥稻谷时的爆腰增率可控制在1%以内,发芽势提高76%以上,发芽率达到95%;设计往复式差速排粮机构,实现了自适应无损排粮,有效解决了粮食架桥、堵塞问题,避免了粮种的机械损伤。设计的5HP-25型粮食干燥机,实际应用效果显示,在粮食平均干燥强度为1.37～2.70 %/h的条件下,干燥水分单位热耗为2 900～4 300kJ/kg,与国标7 400 kJ/kg相比,降低了单位热耗量。研究结果为实现优质、高效、节能干燥工艺及装备设计提供了参考。     

生物质流化床气化与结渣特性中试试验

为优化生物质流化床气化工艺,该研究在中试规模流化床实验台上进行了成型树皮和成型秸秆的空气气化试验,研究了空气当量比、气化温度与送风温度对成型树皮和成型玉米秸秆气化特性的影响,同时采用电子探针显微分析仪与X射线光谱分析仪对气化过程中结渣的微观结构与成分进行了分析。结果表明：气化效果随着空气当量比增大先升后降,空气当量比较佳值在0.24左右,此工况下树皮与秸秆合成气热值分别为5.66和3.92 MJ/m3,气化效率分别为59.62%与33.92%;气化温度增加促进气化效果提升,气化温度从700 ℃升高至800 ℃,树皮合成气热值与气化效率分别提升了1.01 MJ/m3与14.28%;一次风温度的提升对气化效果无显著影响（P>0.05）,但明显提升了炉膛底部温度,容易导致结渣,不利于设备稳定运行。2种生物质都有明显结渣现象,其表面呈现熔融玻璃状。结渣主要由KAl(SiO3)、K2MgSi5O12等复杂化合物与SiO2组成。导致结渣的原因主要是生物质中K、Mg等碱金属元素在床料中富集,与石英砂床料反应形成低熔点熔融盐;树皮含有较多Ca,气化中形成高熔点的CaSO4进而抑制结渣,而秸秆成灰率高,含有较多的K,导致结渣更为严重。     

基于改进多父辈遗传算法的农机调度优化方法

农机装备跨区作业存在作业任务重、转移范围大、作业时效性强等问题,传统的农机调度缺乏科学合理的调配方案。该研究开展了基于改进遗传算法的多机协同作业任务调度方法研究。首先对多块农田需连续进行多种生产任务的问题进行分析,建立在农机数量、转移距离、作业准备时间及作业时间等约束条件下的时间窗农机作业调度模型;然后以最小化作业时间为优化目标,提出改进多父辈遗传算法（Improved Multi-parent Genetic Algorithm, IMPGA）的优化方法求解农机作业规划方案;最后根据新疆塔城地区的农田数据及随机生成的农田任务进行模拟与仿真,并与标准遗传算法（Genetic Algorithm, GA）进行对比。结果表明：IMPGA和GA均能有效解决多任务多农机作业分配问题,IMPGA算法总体上优于GA,调度的最优时间和平均时间分别缩短2.47%和2.70%。该研究可为农机跨区作业提供合理的调度方案,也为规模化无人农场的生产经营提供科学依据。     

设施果园自动对靶精准变量施肥控制系统

针对目前果园条施肥过程中缺乏精准变量对靶施肥装置的问题,该研究研制了一种排肥轮槽口体积可根据果树目标施肥量及冠层直径大小自动调节,排肥轮转速随施肥车速自动变化的果园精准变量自动对靶施肥装置与控制系统。该装置采用外槽轮式结构,槽口体积可连续调节自动变化。采用激光雷达传感器实时探测果树冠层位置,使用霍尔传感器检测施肥车行驶速度,以STM32F407VET6单片机为核心设计了控制器。分别以尿素、复合肥、有机复合肥3种颗粒肥料为试验材料,标定了不同排肥轮槽口开度在不同排肥轮转速下的排肥量,单个槽口排肥量与排肥轮转速呈负线性关系,决定系数R2不小于0.93;建立了单棵果树目标施肥量与排肥轮转速、施肥车速、槽口体积以及果树冠层直径4个变量之间的关系及排肥轮转速控制规则。室内台架试验结果表明,单棵柑橘树实际施肥量与给定目标施肥量相对误差最大为5.17%,变异系数最大为1.47%,可在施肥车速变化情况下准确施用不同颗粒肥料。大棚柑橘果园自动对靶施肥试验结果表明,单棵柑橘树实际施肥量与给定目标施肥量相对误差最大为4.83%,变异系数最大为6.96%,且施肥均在果树冠层直径范围内完成。该装置能够根据果树冠层直径大小对靶按需施肥,适应不同种类颗粒肥的少量或较大量定量施肥,满足不同大小果树不同需肥量的精准变量自动施肥要求。     

Response of labile organic C and N pools to plastic film removal from semiarid farmland soil

To examine the effects of plastic film removal on grain yield and soil organic matter (SOM), a spring maize (Zea may L.) field experiment was conducted for 5 yr at Changwu Agricultural and Ecological Experimental Station of Northwest China. Compared with traditional plastic film mulching during entire growing stages (FM), plastic film removal at the silking stage (RM) resulted in a 6.3% higher average maize yield. Under the RM treatment, soil organic carbon and total nitrogen significantly increased after the 5‐yr cultivation in the 0‐ to 20‐cm layer. Significant increases in extractable organic C (EOC), KMnO₄‐oxidizable C (KMnO₄‐C) and C management index (CMI) in the 0‐ to 20‐cm layer, and light fraction organic C and EOC in the 20‐ to 40‐cm layer were observed in response to plastic film removal after the 1‐yr treatment; the responses were more significant after 5 yr. Under the RM treatment, significant increases in microbial biomass C, light fraction organic N, extractable organic N, KMnO₄‐C and CMI were also observed after five years in the 20‐ to 40‐cm layer. Moreover, KMnO₄‐C and EOC were much more sensitive than other labile SOM fractions to the application of RM, even after only 1 yr of cultivation. Therefore, compared with mulching for the whole growing season, plastic film removal at the maize silking stage is an effective option for increasing yields and enhancing SOM concentration and soil sustainability in the regions with semiarid monsoon climates that have sufficient rainfall during maize reproductive stages.