Design and development of a geothermal temperature control system for broodstock management of channel catfish Ictalurus punctatus

A control system was designed to raise and maintain water temperatures within 0.03-ha earthen ponds to a range conducive for spawning (24–30 °C) channel catfish Ictalurus punctatus. Heating was done during February 2001 to April 2001, when temperatures would have otherwise prohibited spawning (<24 °C). Temperature was increased from 10 °C (ambient) by 2 °C per day, and maintained at 27 °C, by the addition of geothermally warmed water (36 °C). The control system substantially increased the controllability and precision of heating ponds compared to manual operation. Systems were designed to control sets of four ponds. In designing this control system, consideration of biological constraints was essential. Reproduction in channel catfish is most strongly influenced by temperature. Because cold fronts are common during the winter and early spring (January–March), it was essential to ensure that pond temperatures did not fall below the range for spawning. Constraints on the heating rate and temperature variability to maintain fish health and stimulate spawning behavior were considered. Components of the control system included temperature measurement devices (type-T thermocouples), a central electronic control unit, electronic switches and electrically actuated ball valves. In response to the temperature sensed by each thermocouple, the controller sent a message to close or open the valve. When the valve was opened, warm water was added to the pond to increase the average pond temperature. Hardware and algorithm design and initial system testing were the major components of this project. The final design incorporated information on relevant biological parameters and safety features including peak pond temperature, independent aeration and water pressure control mechanisms. Initial results indicate successful control of this biological system, and ongoing studies suggest similar mechanisms may be used for additional control objectives. In particular, this system could be used to vary pond temperatures to study biological responses and to cool ponds by addition of well water during summer months.     

Fertilizer ammonium : nitrate ratios determine phosphorus uptake by young maize plants

We investigated the interacting effects of inorganic nitrogen and the main inorganic phosphorus form in dairy manure (dicalcium phosphate, CaHPO₄) on growth, nutrient uptake, and rhizosphere pH of young maize plants. In a pot experiment, three levels of CaHPO₄ (0, 167, and 500 mg P pot^?1) were combined with nitrogen (637 mg N pot^?1) applied at five NH₄‐N : NO₃‐N ratios (0 : 100, 25 : 75, 50 : 50, 75 : 25, and 100 : 0) and a nitrification inhibitor in a concentrated layer of a typical acid sandy soil from Denmark. ¹⁵N‐labeled NH₄‐N was applied to differentiate the role of nitrification and to partition nitrogen uptake derived from NH₄‐N. Among treatments including nitrogen, shoot biomass, rooting and phosphorus uptake were significantly higher at the five‐leaf stage when CaHPO₄ was applied with NH₄‐N : NO₃‐N ratios of 50 : 50 and 75 : 25. In these treatments, rhizosphere pH dropped significantly in direct proportion with NH₄‐N uptake. The fertilizers in the concentrated layer had a root‐inhibiting effect in treatments without phosphorus supply and in treatments with pure NO₃‐N or NH₄‐N supply. Increased nitrogen uptake as NH₄‐N instead of NO₃‐N reduced rhizosphere pH and enhanced acquisition of applied CaHPO₄ by young maize plants, which may have positive implications for the enhanced utilization of manure phosphorus.     

Interaction between protein, phytate, and microbial phytase. In vitro studies

The interaction between protein and phytate was investigated in vitro using proteins extracted from five common feedstuffs and from casein. The appearance of naturally present soluble protein-phytate complexes in the feedstuffs, the formation of complexes at different pHs, and the degradation of these complexes by pepsin and/or phytase were studied. Complexes of soluble proteins and phytate in the extracts appeared in small amounts only, with the possible exception of rice pollards. Most proteins dissolved almost completely at pH 2, but not after addition of phytate. Phytase prevented precipitation of protein with phytate. Pepsin could release protein from a precipitate, but the rate of release was increased by phytase. Protein was released faster from a protein-phytate complex when phytase was added, but phytase did not hydrolyze protein. Protein was released from the complex and degraded when both pepsin and phytase were added. It appears that protein-phytate complexes are mainly formed at low pH, as occurs in the stomach of animals. Phytase prevented the formation of the complexes and aided in dissolving them at a faster rate. This might positively affect protein digestibility in animals.     

Uptake of veterinary medicines from soils into plants

Medicines play an important role in the treatment and prevention of disease. Whereas the side effects on human and animal health resulting directly from treatment have been widely documented, only recently have the occurrence and fate of medicines in the environment and the potential consequences for human health been recognized as an issue warranting consideration. Medicines have been shown to be released to soils and to persist in the environment. This study was performed to investigate the potential for a range of veterinary medicines to be taken up from soil by plants used for human consumption and to assess the potential significance of this exposure route in terms of human health. Soil analyses indicated that, for selected substances, measurable residues of these are likely to occur in soils for at least 5 months following application of manure containing these compounds. Experimental studies on the uptake of veterinary medicines into carrot roots (tubers) and lettuce leaves showed that only florfenicol, levamisole, and trimethoprim were taken up by lettuces, whereas diazinon, enrofloxacin, florfenicol, and trimethoprim were detected in carrot roots. Measured concentrations in plant material were used to model potential adult human exposure to these compounds. Although exposure concentrations were appreciable in a few instances, accounting for approximately 10% of the acceptable daily intake values (ADI), all were lower than the ADI values, indicating that, at least for compounds with properties similar to those considered here, there is little evidence of an appreciable risk. This exposure route may, however, be important when veterinary medicines have a very low ADI, at which they elicit subtle effects over prolonged periods, or when exposure is occurring via a number of routes at once. Although degradation products (produced in the soil or the plant) were not measured, it is possible for some substances that these could increase the risks to consumers.     

C and N natural abundance of the soil microbial biomass

Stable isotope analysis is a powerful tool in the study of soil organic matter formation. It is often observed that more decomposed soil organic matter is ¹³C, and especially ¹⁵N-enriched relative to fresh litter and recent organic matter. We investigated whether this shift in isotope composition relates to the isotope composition of the microbial biomass, an important source for soil organic matter. We developed a new approach to determine the natural abundance C and N isotope composition of the microbial biomass across a broad range of soil types, vegetation, and climates. We found consistently that the soil microbial biomass was ¹⁵N-enriched relative to the total (3.2 ‰) and extractable N pools (3.7 ‰), and ¹³C-enriched relative to the extractable C pool (2.5 ‰). The microbial biomass was also ¹³C-enriched relative to total C for soils that exhibited a C3-plant signature (1.6 ‰), but ¹³C-depleted for soils with a C4 signature (−1.1 ‰). The latter was probably associated with an increase of annual C3 forbs in C4 grasslands after an extreme drought. These findings are in agreement with the proposed contribution of microbial products to the stabilized soil organic matter and may help explain the shift in isotope composition during soil organic matter formation.     

苜蓿花叶病毒外壳蛋白基因在白三叶中的表达及转基因植株的抗病性分析

以白三叶(Trifolium repens L.)的两个品种Irrigation和Huia的子叶为转化体，用根癌农杆菌(Agrobacterium tumefaciens)介导法将外源的苜蓿花叶病毒外壳蛋白基因转入白三叶，经过筛选、分化和再生，得到了具有卡拉霉素抗性的再生植株。对这些植株进行PCR、Southern和Northern分析，结果表明，外源目的基因已经整合到白三叶基因组中并且得到了表达。对Northern分析呈阳性的植株进行了抗病性检测，证明表达苜蓿花叶病毒外壳蛋白基因的植株病症减轻，发病率、病情指数及病毒积累量都明显低于对照，有的甚至不表现症状，达到了免疫的程度。     

Antioxidant capacity of oat (Avena sativa L.) extracts. 1. Inhibition of low-density lipoprotein oxidation and oxygen radical absorbance capacity

Milled oat groat pearlings, trichomes, flour, and bran were extracted with methanol and the fractions tested in vitro for antioxidant capacity against low-density lipoprotein (LDL) oxidation and R-phycoerythrin protein oxidation in the oxygen radical absorbance capacity (ORAC) assay. The oxidative reactions were generated by 2,2'-azobis(2-amidinopropane) HCl (AAPH) or Cu(2+) in the LDL assay and by AAPH or Cu(2+) + H(2)O(2) in the ORAC assay and calibrated against a Trolox standard to calculate Trolox equivalents (1 Trolox equivalent = 1 TE = activity of 1 micromol of Trolox). The antioxidant capacity of the oat fractions was generally consistent with a potency rank of pearlings (2.89-8.58 TE/g) > flour (1.00-3.54 TE/g) > trichome (1.74 TE/g) = bran (1.02-1.62 TE/g) in both LDL and ORAC assays regardless of the free radical generator employed. A portion of the oat antioxidant constituents may be heat labile as the greatest activity was found among non-steam-treated pearlings. The contribution of oat tocols from the fractions accounted for <5% of the measured antioxidant capacity. AAPH-initiated oxidation of LDL was inhibited by the oat fractions in a dose-dependent manner, although complete suppression was not achieved with the highest doses tested. In contrast, Cu(2+)-initiated oxidation of LDL stimulated peroxide formation with low oat concentrations but completely inhibited oxidation with higher doses. Thus, oats possess antioxidant capacity most of which is likely derived from polar phenolic compounds in the aleurone.     

Rapid sedimentological and biological assessment of hydrocarbon contaminated sediments

It is possible to rapidly detect the presence of high concentrations of sediment associated hydrocarbons using a sediment profile camera and simultaneously evaluate the general sedimentological and biological character of a contaminated area. In sediments that were heavily contaminated with hydrocarbons from spills and chronic long-term additions the presence of hydrocarbons was seen about 50% of the time in the sediment profile images as unique features, ‘H spots’. The presence of these features was related to the concentration of hydrocarbons in the sediment. In highly contaminated muddy sediments ‘H spots’ were found in images collected at stations that had from 270 to 610 ppt total hydrocarbons. Sedimentological and biological information obtained from the sediment profile images confirmed the impacted nature of Elizabeth River sediments. Sediment profile imaging provide a means of obtaining an overall evaluation of the quality of a habitat and impacts on that habitat from pollution related environmental disturbances. While qualitative, an advantage of sediment profile image data is that they can be evaluated in less than a day and used to quickly locate inclusions of hydrocarbons in the sediments for further quantitative chemical or biological sampling, or mapping of heavily contaminated areas.     

Recovery of cover-crop-N in the soil-plant system in the Guinea savannah zone of Ghana

In order to understand the efficiency of residue-N use and to estimate the minimum input required to obtain a reasonable level of crop response, it is important to quantify the fate of the applied organic-N. The recovery of N from ¹⁵N-labelled Crotalaria juncea was followed in the soil and the succeeding maize crop. Apparent N recovery (ANR) by maize from unlabelled Crotalaria juncea, Crotalaria retusa, Calopogonium mucunoides, Mucuna pruriens and mineral fertilizer at three locations were also evaluated. The maize crop recovered 4.7% and 7.3% of the ¹⁵N-labelled C. juncea-N at 42 days after sowing (DAS) and at final harvest, respectively. The corresponding ¹⁵N recovery from the soil was 92.4% and 58.5%. The highest mean ANR of 57.4% was with mineral fertilizer, whereas the mean ANR of 14.3% from C. retusa was the lowest. A large pool substitution and added-N interaction effect was observed when comparing N recovery from the labelled and unlabelled C. juncea. The amount of residue-N accounted for by the isotope dilution method at 42 DAS was 97.1% and at final harvest 65.8%. The large residue-N recovery in the soil organic-N pool explains the residual effect usually observed with organic residue application.     

Capturing genetic variability and selection of traits for heat tolerance in a chickpea recombinant inbred line (RIL) population under field conditions

Chickpea is the most important pulse crop globally after dry beans. Climate change and increased cropping intensity are forcing chickpea cultivation to relatively higher temperature environments. To assess the genetic variability and identify heat responsive traits, a set of 296 F_8–9 recombinant inbred lines (RILs) of the cross ICC 4567 (heat sensitive) × ICC 15614 (heat tolerant) was evaluated under field conditions at ICRISAT, Patancheru, India. The experiment was conducted in an alpha lattice design with three replications during the summer seasons of 2013 and 2014 (heat stress environments, average temperature 35 °C and above), and post-rainy season of 2013 (non-stress environment, max. temperature below 30 °C). A two-fold variation for number of filled pods (FPod), total number of seeds (TS), harvest index (HI), percent pod setting (%PodSet) and grain yield (GY) was observed in the RILs under stress environments compared to non-stress environment. A yield penalty ranging from 22.26% (summer 2013) to 33.30% (summer 2014) was recorded in stress environments. Seed mass measured as 100-seed weight (HSW) was the least affected (6 and 7% reduction) trait, while %PodSet was the most affected (45.86 and 44.31% reduction) trait by high temperatures. Mixed model analysis of variance revealed a high genotypic coefficient of variation (GCV) (23.29–30.22%), phenotypic coefficient of variation (PCV) (25.69–32.44%) along with high heritability (80.89–86.89%) for FPod, TS, %PodSet and GY across the heat stress environments. Correlation studies (r = 0.61–0.97) and principal component analysis (PCA) revealed a strong positive association among the traits GY, FPod, VS and %PodSet under stress environments. Path analysis results showed that TS was the major direct and FPod was the major indirect contributors to GY under heat stress environments. Therefore, the traits that are good indicators of high grain yield under heat stress can be used in indirect selection for developing heat tolerant chickpea cultivars. Moreover, the presence of large genetic variation for heat tolerance in the population may provide an opportunity to use the RILs in future-heat tolerance breeding programme in chickpea.