Requirement Model Based on UML 2.0 for Equipment MIS

This paper introduces the modeling of Unified Modeling Language with use case diagram and active diagram based on Rational Unified Process for Equipment Managemet Information System. It discusses the modeling mechanism and character of UML and develops the Computer Equipment management Information System Based Web using Rational Rose of UML CASE Tool. First, it is describe the authors how to analyze the structure of organize and build the model of structure organize. Second, they abstract the workflow of main operation in organize and build workflow model by active diagram. Finally, they abstract actor, use case with case diagram and finish the requirement model.     

直墙拱形巷道围岩应力场分析

为得出直墙拱形巷道围岩应力分布规律,应用复变函数弹性理论推导了直墙拱形巷道围岩应力分布的解析表达式。对直墙拱形巷道边界的围岩应力和巷道水平线方向的围岩应力分布规律进行分析,并考虑直墙拱形巷道断面高宽比和侧压系数对其影响规律。研究表明：在不同巷道断面高宽比、侧压系数下,直墙拱形巷道围岩应力集中区域主要集中在直墙底部底角处、拱形顶板中点附近和底板中部3个位置。不同巷道断面高宽比下,直墙拱形巷道沿水平线的应力分布规律基本相同。侧压系数大于1时,采用巷道断面高宽比小于1较有利于巷道稳定;侧压系数小于等于1时,采用巷道断面高宽比大于1较有利于巷道稳定。     

不同光照条件下番茄主要性状的变化及相关分析

耐弱光性不同的番茄品种（品系）对光照条件反应不同，确定番茄耐弱光鉴定指标，可以快速有效地从大量种质资源中筛选耐弱光的番茄品种，提高品种耐弱光选择效率；试验对耐弱光性不同的4份番茄品种（品系）于定植后进行遮光处理，分别研究各品种在不同光照下的光合特性、经济性状的变化，并对11个性状进行相关及通径分析。试验结果表明，在透光率为25%（平均光照强度的光通量约为230μmol/）的光照条件下，净光合速率、气孔导度、蒸腾速率、坐果率、单果重、单株产量均有不同程度的下降，且弱光下坐果率、弱光下净光合速率、弱光下胞间CO2浓度与相对单株产量直接通径系数分别为1.92、1.76、2.13，相关系数分别为0.53、-0.09、0.48。可见，弱光下的坐果率是鉴定番茄耐弱光性的可靠指标，弱光下净光合速率和胞间CO2浓度可作为耐弱光性鉴定的重要辅助指标。     

Basal internode elongation of rice as affected by light intensity and leaf area

Short basal internodes are important for lodging resistance of rice(Oryza sativa L.).Several canopy indices affect the elongation of basal internodes,but uncertainty as to the key factors determining elongation of basal internodes persists.The objectives of this study were(1)to identify key factors affecting the elongation of basal internodes and(2)to establish a quantitative relationship between basal internode length and canopy indices.An inbred rice cultivar,Yinjingruanzhan,was grown in two split-plot field experiments with three N rates(0,75,and 150 kg N ha−1 in early season and 0,90,and 180 kg N ha−1 in late season)as main plots,three seedling densities(16.7,75.0,and 187.5 seedlings m−2)as subplots,and three replications in the 2015 early and late seasons in Guangzhou,China.Light intensity at base of canopy(Lb),light quality as determined from red/far-red light ratio(R/FR),light transmission ratio(LTR),leaf area index(LAI),leaf N concentration(NLV)and final length of second internode(counted from soil surface upward)(FIL)were recorded.Higher N rate and seedling density resulted in significantly longer FIL.FIL was negatively correlated with Lb,LTR,and R/FR(P<0.01)and positively correlated with LAI(P<0.01),but not correlated with NLV(P>0.05).Stepwise linear regression analysis showed that FIL was strongly associated with Lb and LAI(R2=0.82).Heavy N application to pot-grown rice at the beginning of first internode elongation did not change FIL.We conclude that FIL is determined mainly by Lb and LAI at jointing stage.NLV has no direct effect on the elongation of basal internodes.N application indirectly affects FIL by changing LAI and light conditions in the rice canopy.Reducing LAI and improving canopy light transmission at jointing stage can shorten the basal internodes and increase the lodging resistance of rice.     

浙江红花油茶高接换冠成活率影响因素研究

为研究浙江红花油茶高接换冠成活率影响因素,解决嫁接成活率低的问题,2013年6月从中国林业科学研究院亚热带林业研究所引进浙江红花油茶优树穗条,在青田县大垟山林场开展浙江红花油茶高接换冠试验,分析砧木林郁闭度、坡位、砧木生长势及接穗保存时间等因素对嫁接成活率的影响。结果表明,林分郁闭度在0.3~0.7之间,随着郁闭度增加嫁接平均成活率提高;郁闭度在0.7~0.9之间,随着郁闭度增加,嫁接成活率降低;当郁闭度为0.7时,嫁接成活率最高为88.8%。山腰的嫁接成活率高达86%,显著高于山顶和山脚。浙江红花油茶砧木生长势越强嫁接成活率越高。接穗于采集当天嫁接效果最好成活率达89.1%,接穗保存1、2、3、4、5、6天嫁接,成活率分别为85.2%、75.2%、51.6%、28.1%、12.2%、9.3%。偏相关分析表明,各因素对嫁接成活率影响由大到小依次为接穗保存时间(-0.97)、郁闭度(0.85)、生长势(0.81)、坡位(-0.65)。     

沉淀法制备的紫杉醇白蛋白微粒包封率测定

采用沉淀法制备紫杉醇白蛋白微粒,采用高效液相色谱法(HPLC)测定紫杉醇质量浓度,以二氯甲烷为有机相,采用萃取法分离白蛋白微粒与游离药物,测定其包封率。结果表明:紫杉醇在10~100 mg·L-1范围内线性良好,平均回收率可达到97.6%~101.0%;有机溶剂萃取法测定紫杉醇白蛋白微粒包封率的平均回收率,达94.80%~101.67%。这种方法测定紫杉醇白蛋白微粒回收率准确可靠,适用于沉淀法制备的白蛋白微粒的包封率测定。     

射流泵装置性能预测方法

提出了一种射流泵装置性能预测方法,并进行了试验验证.以射流泵试验所得射流泵的流量比与压力比曲线,以及离心泵的流量扬程曲线作为预测初始条件,通过射流泵装置2种吸上高度4.5和9.0 m的性能试验,比较各流量比时装置工况点试验值与预测值精度,发现数值解法整体误差较小,能更好地反映射流泵扬程随流量比变化的情况,但与试验值相比仍存在误差且个别工况点误差较大,需进一步修正.引入预测值与试验值的比值作为修正系数,通过Plackett-Burman试验设计,从吸上高度、面积比、喷嘴直径、流量比、喉嘴距、喉管长径比、泵转速等因子中筛选出对射流泵扬程影响效应显著的面积比及流量比作为修正公式的关键参数,利用遗传算法和公式自动搜索拟合,得到射流泵扬程的计算公式,且相关系数超过0.99.通过射流泵装置在吸上高度为3.5和8.0 m的试验结果比较,表明具有较高的可信度.