Characterization of char from the pyrolysis of tobacco

Pyrolysis of tobacco was studied in oxidative and nonoxidative (inert) environments at atmospheric pressure and temperatures ranging from 150 to 750 degrees C. The objective was to study the effect of pyrolysis conditions on the characteristics of the solid residue, i.e., char. The char was characterized using cross-polarization (13)C nuclear magnetic resonance (CPMAS NMR), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), the Brunauer-Emmett-Teller (BET) surface area, and the elemental composition. The char yield from pyrolysis (i.e., nonoxidative) decreased sharply with an increase in temperature to ca. 22% (dry, ash-free basis) at high temperatures. In oxidative pyrolysis, i.e., in 5% oxygen, the char was completely oxidized above 600 degrees C. The gaseous product from pyrolysis at high temperatures contained a significant concentration of hydrogen. The surface area of the char was low, with a maximum of 8 m(2)/g at 400 degrees C. SEM analysis indicated that pyrolysis of the tobacco led to a gradual accumulation of inorganic crystals on the exposed surfaces, and some constituents also melted, resulting in the formation of vesicles by evolving gas. NMR analysis showed significant changes in pectin and sugar constituents of the tobacco and breaking of glycosidic bonds of cellulose at 300-500 degrees C before the char became predominantly aromatic at high temperatures. FTIR results showed a continuous decrease in the intensity of the OH stretch with temperature and the aromatic character to be at maximum at 550-650 degrees C. The H/C ratio of the char decreased continuously with temperature, while the O/C ratio became constant above 300 degrees C due to the presence of oxides and carbonates in the char. The results are consistent with the analysis of the evolved gases.     

Interaction analysis between slenderness ratio and resin content on mechanical properties of particleboard

The interaction between particle size and resin content is one of the most important structural parameters that can influence the accuracy of predictions about wood-composite properties. We developed three kinds of equation (linear, quadratic, and exponential) for each mechanical property of particleboard based on slenderness ratio and resin content at a constant density (0.7g cm -3 ). Results from SHAZAM software (version 9) suggested that the quadratic function was not significant, but the linear and exponential functions were significant. The interaction between particle size and resin content was analyzed by Maple 9 software. The results indicated that an exponential function can better describe the simultaneous effect of slenderness and resin content than a linear equation. Under constant resin content, particles with higher slenderness ratios increased more in modulus of rupture (MOR) and modulus of elasticity (MOE) than did particles with lower slenderness ratios. Edge withdrawal resistance (SWRe) values did not increase with increasing slenderness ratio.     

Effects of NaCl salinity on some leaf nutrient concentrations,non-photochemical quenching and the efficiency of the PSII photochemistry of two Iranian pomegranate varieties under greenhouse and field conditions: Preliminary results

The present research was conducted to study the responses of ‘Malas–e–Saveh’ (M) and ‘Shishe–Kab’ (Sh) Iranian pomegranates to sodium chloride (NaCl) stress under greenhouse and field conditions. Treatments included waters electrical conductivity (EC = 1.5, 3, 6, 9 and 12 dS m^?1 for greenhouse) and (EC = 1.05 as control, 4.61 and 7.46 dS m^?1 for field studies). Interactive effects of salinity × variety indicated the highest chlorophyll and leaf potassium concentration, and the lowest leaf chloride and sodium in control under greenhouse study. Non-photochemical quenching, effective quantum yield of photochemical energy conversion in PSII reduced under the highest salinity level in field, however, basal quantum yield of non-photochemical processes in PSII increased in the highest salinity. Sodium and chloride increased with increased in salinity. Calcium, magnesium and iron significantly decreased with increased in salinity. It seems that there are differences between pomegranate cultivars and Malas-e-Saveh is more tolerant compared with Shishe Kab.     

Comparison of genetic variation among accessions of <Emphasis Type="Italic">Aegilops tauschii</Emphasis> using AFLP and SSR markers

Genetic diversity of 54 accessions of Aegilops tauschii from five countries was assessed using sequence-tagged microsatellites (or simple sequence repeats, SSRs) and amplified fragment length polymorphisms (AFLPs). In the case of AFLP analysis, a total of 256 amplification products obtained, 234 of them were polymorphic across all the 54 accessions. A total of 224 fragments were obtained from the 24 SSR primers and 219 of fragments were polymorphic across all the genotypes screened. Based on both AFLP and SSR markers, the highest percentage of polymorphisms were obtained in Iranian and accessions of unknown origin. The highest polymorphic information content (PIC) value was observed for SSRs (0.82) while the highest marker index (MI) value was for AFLPs (8.5) reflecting the hyper-variability of the first and the distinctive nature of the second system. Principal co-ordinate analysis (PCO) revealed congruent patterns of genetic relationships for both data sets, but did not group accessions strictly according to their geographical origins. Poor correlation was found between AFLP and SSR marker loci. This low association may be due to low number of AFLP and SSR markers. These results show that molecular markers can help to organize the genetic variability and expose useful diversity for breeding purposes.     

Applicability of Aegilops tauschii drought tolerance traits to breeding of hexaploid wheat

Few genes are available to develop drought-tolerant bread wheat (Triticum aestivum L.) cultivars. One way to enhance bread wheat’s genetic diversity would be to take advantage of the diversity of wild species by creating synthetic hexaploid wheat (SW) with the genomic constitution of bread wheat. In this study, we compared the expression of traits encoded at different ploidy levels and evaluated the applicability of Aegilops tauschii drought-related traits using 33 Ae. tauschii accessions along with their corresponding SW lines under well-watered and drought conditions. We found wide variation in Ae. tauschii, and even wider variation in the SW lines. Some SW lines were more drought-tolerant than the standard cultivar Cham 6. Aegilops tauschii from some regions gave better performing SW lines. The traits of Ae. tauschii were not significantly correlated with their corresponding SW lines, indicating that the traits expressed in wild diploid relatives of wheat may not predict the traits that will be expressed in SW lines derived from them. We suggest that, regardless of the adaptability and performance of the Ae. tauschii under drought, production of SW could probably result in genotypes with enhanced trait expression due to gene interactions, and that the traits of the synthetic should be evaluated in hexaploid level.     

Evaluation of surface irrigation system performance using System Dynamics (SD) approach

Various methods and criteria have been proposed and utilized for the evaluation of irrigation systems performance, which can be used for comparison of design conditions and irrigation systems performance. Surface irrigation systems should be paid more attention among all other irrigation systems due to their operation simplicity and high losses. In the present study, while describing main relationships of irrigation evaluation criteria of application efficiency, water requirement efficiency, Deep Percolation Ratio and Tail Water Ratio, a method based on SD will be introduced. Modeling of this approach has been done using VENSIM-DSS software. Model has been tested in a case study that included the modeling of a furrow in four irrigation status: current situation, full irrigation, deficit irrigation and finally deficit irrigation with optimized irrigation cutoff time and inflow into furrow. The results reveal the high capabilities of SD approach in modeling water resources and irrigation systems. Its user friendly and ability in transferring data to the data bank can introduce this approach and software as an applicable decision support system.     

Axle-less F1-ATPase rotates in the correct direction

F1-adenosine triphosphatase (ATPase) is an ATP-driven rotary molecular motor in which the central gamma subunit rotates inside a cylinder made of three alpha and three beta subunits alternately arranged. The rotor shaft, an antiparallel alpha-helical coiled coil of the amino and carboxyl termini of the gamma subunit, deeply penetrates the central cavity of the stator cylinder. We truncated the shaft step by step until the remaining rotor head would be outside the cavity and simply sat on the concave entrance of the stator orifice. All truncation mutants rotated in the correct direction, implying torque generation, although the average rotary speeds were low and short mutants exhibited moments of irregular motion. Neither a fixed pivot nor a rigid axle was needed for rotation of F1-ATPase.