Evaluation of 2 cement techniques for augmentation of stripped 1.5 mm screw sites in the distal metaphysis of feline radii

OBJECTIVE: To evaluate the effect of 2 cement augmentation techniques on pullout strength of 1.5 mm screws placed in stripped 1.5 mm screw sites in the distal metaphysis of feline radii. STUDY DESIGN: Experimental study. SAMPLE POPULATION: Feline radii (21 pairs). METHODS: Treatment groups (n=4) were allocated according to a Latin square design to 4 sites in each pair of radii. Positive and negative controls were a 1.5 mm screw and a screw of the same diameter in a previously stripped screw hole, respectively. Treatment groups were a 1.5 mm screw implanted in a previously stripped screw hole after injection of polymethylmethacrylate (PMMA) or a bioresorbable calcium phosphate cement (CPC, Norian skeletal repair system (SRS)). The ultimate pullout strength was compared between groups. RESULTS: The mean (+/-SEM) pullout strength of screws augmented with either bone cement was less than that of the positive control group and greater than that of the negative control. Injection of CPC or PMMA before screw implantation increased the pullout strength of the negative control by 86.8+/-22.9% and 104.1+/-32.1%, respectively. Holding power of the positive control screws differed from these 2 groups, and was 274.8+/-39.17% higher than that of the negative control. CONCLUSION: Injection of CPC or PMMA increases but does not restore the holding power of stripped 1.5 mm diameter screws. CLINICAL RELEVANCE: The use of CPC (Norian SRS) augmentation of stripped 1.5 mm diameter screws warrants clinical investigation as it combines biomechanical results similar to PMMA with osteoconduction and resorbability.     

Response of wheat growth and productivity to exogenous polyamines under lead stress

Polyamines [i.e. spermine (Spm), spermidine (Spd) and putrescine (Put)] antagonistic effects on stress imposed by 2.0 mM lead (Pb²⁺) on growth, yield and its components and changes in the osmoprotectant and endogenous Pb²⁺ concentrations, the contents of some nutrients and tissue health in wheat plants were evaluated. Under the three applied polyamine (PAs) applications, the efficiency of wheat plants to tolerate Pb²⁺ stress in terms of growth and yield characteristics was noticed to varying degrees. The enhancements in osmoprotectant concentrations and plant health [in terms of relative water content (RWC) and membrane stability index (MSI)], and reductions in electrolyte leakage (EL) and plant Pb²⁺ concentration were correlated with the reasonable growth of Pb²⁺-stressed plants and their grain yield. Results point out that, better growth and yield characteristics, MSI, RWC, leaf photosynthetic pigment and osmoprotectant concentrations, and nutrient contents were obtained with seed soaking in 0.25 mM Spm, 0.50 mM Spd or 1.0 mM Put than those generated with seed soaking in water under 2.0 mM Pb²⁺ stress. In contrast, EL and the concentration of endogenous Pb²⁺ were significantly reduced. However, the Pb²⁺-free control positively exceeded the all stressed treatments. Among all tested PAs, 1.0 mM Put showed the best results and thus is recommended, as seed soaking, for wheat to grow well under Pb²⁺ stress.     

Hedysarum phylogeny mediated by RFLP analysis of nuclear ribosomal DNA – RFLP and Hedysarum phylogeny

The RFLP technique has been employed to investigate phylogenetic relationships between species of the Hedysarum genus. Homologous DNA probes were used to generate patterns from a set of the Mediterranean group. The degree of band sharing was used to estimate genetic distances between species and to draw phylogenetic trees. These are in good agreement with phylogeny based on morphological and isozyme markers, but contain novel insights. The results are discussed in the context of current work in molecular biosystematics in Hedysarum complex. Attempts made in this approach to access the extent of variability at the DNA level occurring with the domestication process have been investigated. With the availability of the tested probes, it has been assumed that the genetic structure is not affected by the domestication process.     

Screening techniques and sources of resistance to root diseases in cool season food legumes

Summary Soil-borne fungal diseases are among the most important factors, limiting the yield of grain legumes in many countries worldwide. Root rot, caused by Aphanomyces euteiches, Rhizoctonia solani, Fusarium solani and wilt, caused by several formae speciales of Fusarium oxysporum are the most destructive soil-borne diseases of pea, chickpea, lentil, fababean and lupin. The most effective control of these diseases is achieved through the use of resistant varieties. In this paper, recent advances in conventional and innovative screening methods for disease resistance are presented. Many grain legume accessions, which are maintained in national and international germplasm collections, have been evaluated for disease resistance and numerous resistant varieties have been released following incorporation of identified resistance genes from these sources. Recent identification of molecular markers tightly linked to resistance genes has greatly enhanced breeding programs by making marker assisted selection (MAS) possible and allowing the development of varieties with multiple disease resistance. Progress in the understanding of the biology of soil-borne fungal pathogens of grain legumes is also reviewed with particular reference to the genetic structure of their populations, diagnosis and host–pathogen interaction.     

Evaluation of several selection procedures for predicting yield performance of progenies in two populations of cotton (Gossypium barbadense L.)

Average, combined and specific indices involving lint yield and its components “seeds per boll” and “lint per seed” were computed for two populations of cotton (Gossypium barbadense) evaluated in two seasons. All indices were constructed to maximize advance in “lint yield”. Indices were evaluated as to their usefulness in identifying high yielding genotypes. Within the limits of this experiment it was shown that:

1. 1.
   Specific indices were superior to yield as criteria for selection in both predicted and actual gains.     

Genetics of resistance to 3 isolates of Ascochyta fabae on Faba bean (Vicia faba L.) in controlled conditions

Summary Genetics of resistance to Ascochyta fabae Speg. in Vicia faba L. was studied with a final objective to develop resistant faba bean varieties to Ascochyta blight. The study was conducted separately on 3 single spore isolates (AF10-2 and AF13-2 from Tunisia and AF4-3 from France) and belonging to different groups of virulence (GV1 and GV2). Important general combining ability (GCA) effects were found especially with isolates AF10-2 and AF4-3. Specific combining ability (SCA), although significant for the 3 isolates, was important only with AF13 -2, but less important than GCA. Additive gene effects were predominant to non-additive effects. Lines 29H and A8817 transmitted to their progenies resistance to the 3 isolates, whereas 14–12 and 19TB conferred resistance to their progenies only with isolates AF13-2 and AF4-3, respectively. In the material studied, resistance was generally controlled by dominant genes but also could be attributed to recessive genes although less frequent. Analysis of segregation in the F2 of 2 crosses between the resistant lines (A8817 and 29H) and the susceptible line (14–12) with isolate AF4-3 revealed dominant monogenic control at the level of leaves in the 2 resistant lines and, in addition, a recessive gene controlling resistance of stems. Non-allelic interactions were occasionally manifested and their origin appeared to be due to line 19TB. A recurrent selection scheme was proposed with the objective to develop improved open-pollination populations and synthetic varieties responding to the objective of the national Tunisian research programme on faba bean.     

Structure-physicochemical function relationships of soybean beta-conglycinin heterotrimers

We purified four single molecular species of beta-conglycinin heterotrimers consisting of the alpha and beta subunits or the alpha' and beta subunits from mutant soybean cultivars lacking the alpha or alpha' subunit, respectively, and examined their structural features and physicochemical functions. The extent of the hydrophobicities of the heterotrimers was related to the number of the alpha or alpha' subunit. The thermal stabilities of the heterotrimers were mainly conferred by the subunit which had lower thermal stability. Solubilities at low ionic strength (mu = 0.08) of the heterotrimers containing the alpha or alpha' subunit were very similar to those of the alpha and alpha' homotrimers, respectively. Emulsifying abilities and heat-induced associations of the heterotrimers containing one beta subunit were similar to those of the alpha or alpha' homotrimer, whereas those of the heterotrimers containing two beta subunits were similar to those of the beta homotrimer.     

Effect of cadmium,copper and chromium (VI) on the growth of nile water algae

The Algal Assay Procedure Bottle Test was used to investigate the effect of Cd, Cu, and Cr (VI) on the growth of Nile water algae. The results of this investigation indicated that Cd has slight inhibitory effects on algal growth at low concentration (0.05 mg L^?1), while it was inhibiting algal growth at higher concentration (> 1.0 mg L^?1). In contrast, Cu and Cr did not affect algal growth in all investigated concentrations. Combinations of Cd with Cu and Cr seemed to interact synergistically. The synergism between Cd and Cu was more pronounced than between Cd and Cr. Clear changes in the diversity and redundancy of algal structure took place after metal addition. The inhibitory effect of the studied metals was in the following order: Cd-Cu > Cd - Cr > Cd > Cu > Cr.     

Differences between wheat cultivars in acquisition and utilization of phosphorus

In an attempt to evaluate whether breeding and selection for high yielding capacity changed the P requirement of modem wheat cultivars. the response of two wheat cultivars to different levels of P supply was investigated. A traditional cultivar (‘Peragis’) and a modern spring-wheat cultivar (‘Cosir’) were cultivated in a C-loess low in available P and high in CaCO₃ in 120 cm high PVC tubes. In addition and for comparison, nutrient solution experiments were also conducted. Shoot growth, root growth. P uptake. P translocation and P distribution within the shoot at different developmental stages were compared. The grain yield of the modern cultivar ‘Cosir’ was higher at limiting and non-limiting P supply and. therefore, this cultivar can be considered as more P-efficient than the traditional cultivar. Grain yield reduction at low P supply was mainly due to an inhibition of tillering and thus lower number of ears per plant, whereas the number of grains per ear was hardly affected. Reduced tillering at low P supply could not be related to P concentrations in the shoot meristematic tissues which were generally much higher than in other plant tissues and kept at an elevated level even at limiting P supply. Root branching (1^st order laterals) was reduced at limiting P supply in ‘Cosir’ but not in ‘Peragis’ which, generally, had lower numbers of laterals at the beginning of tillering. From the results it can be concluded that the main factors contributing to the higher P efficiency of the modern cultivar ‘Cosir’ are (i) efficient use of assimilates for root-growth characteristics which enhance P acquisition: enhanced root branching and thus smaller mean root diameter and longer root hairs, (ii) an efficient P uptake system, (iii) efficient remobilization of P from vegetative plant organs to the grains, and most importantly (iv) lower P requirement for grain yield formation because of lower ear number per plant but higher grain number per ear.