Moisture content penetration in wood elements under varying boundary conditions

Knowledge of effects of moisture exposure on timber structures is important for serviceability and load bearing capacity of timber elements and systems. Varying climate affects the moisture content profiles in timber as the relative humidity changes in the ambient air. This paper presents methods for calculation of diffusion based moisture transport and corresponding results on how timber responds to varying moisture with regard to moisture penetration and distribution. The calculations are based on measured outdoor relative humidity and temperature at different climatic locations in Sweden. No remarkably large deviations between the different climatic locations were found in general, which is positive in a design code perspective.     

Transverse shrinkage in G-fibers as a function of cell wall layering and growth strain

Transverse drying shrinkage was measured at microscopic and mesoscopic levels in poplar wood characterised by an increasing growth strain (GS), from normal to tension wood. Results show that: (a) the drying shrinkage, measured as a relative thickness decrease, was significantly higher for G-layer (GL) than for the other layers (OL), GL shrinkage was not significantly correlated with GS, and OL shrinkage was negatively correlated with GS. (b) In gelatinous fibre (G-fibre), lumen size increased during drying and this increase was positively related with GS, but in normal wood fibre, lumen size decreased during drying. These findings suggest that GL shrank outwards (i.e., its internal perimeter increases), so that its shrinkage weakly affected the total cell shrinkage and the mesoscopic shrinkage was controlled by the OL shrinkage which shrank inwards (i.e., its external perimeter decreases). (c) Measurements done on 7 × 7 mm2 thin sections evidenced a negative correlation between transverse shrinkage and GS, significant in T direction but weak in R direction. These observations at both levels allow to discuss the contribution of GL to the mesoscopic shrinkage of tension wood.     

Host selection of small cedar longicorn beetle, <Emphasis Type="Italic">Callidiellum rufipenne</Emphasis> (Coleoptera:Cerambycidae), on Japanese cedar, <Emphasis Type="Italic">Cryptomeria japonica</Emphasis>, in terms of bark water content of host trees

We caught the adults of a secondary wood-boring insect, Callidiellum rufipenne (Motschulsky), on Japanese cedar, Cryptomeria japonica D. Don., trees and logs with manipulated bark water contents to clarify the mechanism of host selection by C. rufipenne. More C. rufipenne were trapped when the bark water content range was ca. 120–200%. Fewer C. rufipenne were trapped at higher and lower bark water contents. These findings indicate that C. rufipenne adults do not simply select weakened or dying trees. Bark water content is one of important factors for C. rufipenne choosing their host for oviposition.     

The Japanese pulp and paper industry: an analysis of financial performance from 1991 to 2001

This article discusses the determinants of profitability expressed as return on capital among Japanese pulp and paper companies. Return on capital is measured as income before tax related to stockholders’ equity. Return on capital has been divided into profit margin and asset utilization rate. The hypothesis is that return on capital can be explained by mill size, productivity, product line, financial situation, and use of wood resources. The dataset consists of 13 larger Japanese pulp and paper companies listed in Pulp &; Paper Statistics. Data on financial performance, production, and use of wood fibers were collected for the period 1991–2001. The average return on equity for the studied companies is 4.2%. Labor productivity has increased quite significantly, from about 600 to 1,000 kg/employee and year. An econometric analysis indicates that the best model fit is found when the asset utilization rate is used as the dependent variable. Significant variables are, among others, asset utilization rate lagged one time period (?), labor productivity (+), capital productivity (?), paper production as a share of total paper and board production (?), total value of assets on the books (?) and solidity (+). This may indicate that the total value of assets on the books is large in relation to the total production of paper, paperboard and pulp.     

Shoot development and dieback in progenies of Nothofagus obliqua

Shoot growth and dieback were compared among progenies of nursery-grown seedlings of Nothofagus obliqua belonging to seven progenies of the same provenance (Quila-Quina, Argentina). First-year shoots consisted of one growth unit (GU) and second-year shoots of one or two GUs. The probability of development of two GU was similar for all progenies. Progenies were different in terms of shoot size, terminal bud abscission, the extent of shoot dieback after shoot extension and the node of origin of the relay shoot on the first shoot. Plants with a second-year shoot consisting of two GUs had a thicker stem and more nodes than those with single-GU shoots. The selection of N. obliqua seed trees based on architectural traits suitable for forestry development at specific sites must contemplate variability among progenies and their probabilities of successful development under different conditions.     

Genetic analysis of selected almond genotypes and cultivars grown in Turkey using peroxidase-gene-based markers

Peroxidase plays important roles in many stress-related interactions and catalyzes important reactions in various physiological processes. Since peroxidase played critical roles in the evolution of almond(Prunus dulcis Miller(D.A Webb) syn P. amygdalus Batsch), peroxidase-gene-based analyses may increase the understanding of evolution of this species. Peroxidase gene polymorphism(POGP) markers were used to determine genetic diversity and relationships among 69 Turkish genotypes/cultivars and 27 foreign almond cultivars by using unweighted pair group method with arithmetic mean(UPGMA) analysis. This study is the first evaluation of the use of POGP markers for diversity analysis in almond.Totally, 83 fragments were obtained from eight peroxidase primer pairs, and polymorphism was identified as 94 %.Similarity level among the genotypes ranged between 0.63 and 0.93, and all materials were distinguished. In general,Turkish and foreign genotypes were mixed in clusters since they share a common genetic background and gene migration among the sites. Clusters were not based on geographic regions except for some minor groupings. This study indicated that peroxidase gene markers can be reliably used to determine genetic relationships in almonds.     

Modelling interactions amongst people and forest resources at the landscape scale

FLORES, the Forest Land Oriented Resource Envisioning System, is a framework to facilitate quantitative modelling of ecological, economic and social issues at the landscape scale. This issue ofSmall-scale Forest Economics, Management and Policy describes the evolution of FLORES from a concept to a series of models calibrated for diverse locations, and documents the lessons learned. The idea to construct and use landscape-scale models of the forest frontier, based on simulating household decisions and land use at a spatial scale close to the field level, arose from a desire to add rigour to land-use policy research at CIFOR, the Center for International Forestry Research (Vanclay 1995). This simulation modelling approach to addressing interdisciplinary issues, where people are strongly interacting with forest resources, became known as FLORES, the Forest Land Oriented Resource Envisioning System (Vanclay 1998). Muetzelfeldtet al. (1998) constructed a simple prototype of a FLORES model to illustrate the concept and demonstrate the ability of a system-dynamics modelling environment to animate such a model (Muetzelfeldt and Taylor 1997, 2001, Muetzelfeldt and Massheder 2003). In 1999, FLORES became a reality, when 50 scientists from diverse disciplines met in Bukittinggi, Indonesia to construct the first FLORES model styled on this prototype (CIFOR 1999, Vanclayet al. 2003). The research reported in this special issue was made possible by generous financial support from the Department for International Development (UK), the European Community, the Asian Development Bank (under RETA 5812) and the Center for International Forestry Research. The views expressed herein are those of the authors alone. We would like to thank the following people who have assisted in the production of this special issue by acting as anonymous referees for these and other papers: Andy Warner, Brendan Moran, Bruno Verbist, Chris Dake, Chris Legg, Doug Sheil, Euan Mason, Francois Bousquet, Frank Vanclay, Geoff Slaughter, James Gambiza, John Herbohn, John Poulsen, Jungho Suh, Mike Spilsbury, Paul Phillips, Paul van Gardingen, Phil Norman, Philip Nyhus, Roger Wheate, Ross Sigley, Steve Harrison and Tom Evans. Thanks also to the editorial staff, especially Steve Harrison, John Herbohn and Jungho Suh, for making this special issue possible.