Functional porous carbons from waste cotton fabrics for dyeing wastewater purification

A new functional porous carbons (PC-WF) is prepared by activation-pyrolysis method use waste cotton fabrics (WF) as an abundant, cheap and available precursor for removal of Brilliant Crocein (BC-GR) and Cationic Red 2GL (CR-GL) from aqueous phase. The PC-WF was characterized by BET, FTIR, SEM, and XRD techniques, the surface area, total pore volume, average pore diameter was found as 1463.5 m² g^-1, 0.783 cm³ g^-1 and 2.14 nm, respectively. The influences on BC-GR and CR-GL adsorption of various experimental factors such as initial concentration and temperature were investigated. Adsorption kinetics was found to be best represented by the pseudo-second order model. The adsorption capacity was 319.8 mg g^-1 for BC-GR and 842.5 mg g^-1 for CR-GL at 30 °C, respectively. The results indicate that for waste cotton fabrics in particular, the practical application of this process to the production of porous carbon would be possible.     

Characterizing long-term forest disturbance history and its drivers in the Ning-Zhen Mountains,Jiangsu Province of eastern China using yearly Landsat observations (1987–2011)

Forest losses or gains have long been recognized as critical processes modulating the carbon flux between the biosphere and the atmosphere. Timely, accurate and spatially explicit information on forest disturbance and recovery history is required for assessing the effectiveness of existing forest management. The major objectives of our research focused on testing the mapping efficacy of the vegetation change tracker (VCT) model over a forested area in China. We used a new version of VCT algorithm built upon the Landsat time series stacks (LTSS). The LTSS consisted of yearly image acquisitions to map forest disturbance history from 1987 to 2011 over the Ning-Zhen Mountains, Jiangsu Province of east China. The LTSS consisted of TM and ETM+ scenes with different projections due to distinct data sources (Beijing remote sensing ground station and the USGS EROS Center). The validation results of the disturbance year maps showed that most spatial agreement measures ranged from 70 to 86 %, comparable with the VCT accuracies reported for many places in USA. Very low accuracies were identified in 1995 (38.3 %) and 1992 (56.2 %) in the current analysis. These resulted from the insensitivity of the VCT algorithm to detect low intensity disturbances and also from the mis-registration errors of the image pairs. Major forest disturbance types existing in our study area were identified as agricultural expansion (39.8 %), urbanization (24.9 %), forest management practice (19.3 %), and mining (12.8 %). In general, there was a gradual decreasing trend in forest cover throughout this region, caused principally by China’s economic, demographic, environmental and political policies and decisions, as well as some weather events. While VCT has largely been used to assess long term changes and trends in the USA, it has great potential for assessing landscape level change elsewhere throughout the world.     

Effect of ammonia and nitrite on vigour,survival rate,moulting rate of the blue swimming crab <Emphasis Type="Italic">Portunus pelagicus</Emphasis> zoea

The effects of ammonia and nitrite on vigour, survival rate, moulting rate of zoea of blue swimming crab, Portunus pelagicus, were studied. A total of five nitrite-N treatments (26.67, 53.34, 106.68, 213.36, 426.72 mg/l) and a control (no nitrite-N added) were set up for the acute nitrite-N toxicity experiment; a total of five ammonia-N treatments (8.43, 16.86, 33.72, 67.44, 134.88 mg/l) and a control (no ammonia-N added) were set up for the acute ammonia-N toxicity experiment. The results showed that the vigour, survival rate and moulting rate of zoea of the blue swimming crabs exposed to over 53.34 mg/l were significantly different (P < 0.05) from the control group. The zoea LC₅₀ values (mg/l) of nitrite-N were 179.47, 76.56, 66.70, 37.49, 25.01, 25.35, 25.34 mg/l for 24, 36, 48, 60, 72, 84, 96 h, respectively. The vigour, survival rate and moulting rate of zoea of the blue swimming crabs exposed to over 16.86 mg/l were significantly different (P < 0.05) from the control group. The zoea LC₅₀ values (mg/l) of ammonia-N were 51.04, 39.62, 38.72, 24.43, 16.90, 13.42, 11.16 mg/l for 24, 36, 48, 60, 72, 84, 96 h, respectively. The zoeae are highly sensitive to ammonia and nitrite, and the toxicity of ammonia and nitrite on Portunus pelagicus decrease with development of this crab.     

Soil CO2 emission in sugarcane management systems

Sugarcane management systems affect soil attributes such as the carbon cycle. This fact has stimulated the sugar and alcohol industry to refine the sugarcane production systems by replacing the pre-harvest burning (PB) and manual harvest with mechanized harvesting followed by residue deposition. The aim of this study was to evaluate different management systems with respect to C cycling carbon dioxide and soil parameters (chemical, physical and biological) which were determined over the season. Three sugarcane cultivation systems were evaluated at the following periods: (a) PB, (b) 5-year green harvest and (c) 10-year green harvest. The results indicated that CO₂ emission was 36% greater in the 10-year sugarcane green harvest system than in the PB system. The bulk density and macroporosity were the factors that were most affected by the different sugarcane management systems and that significantly influenced soil CO₂ emissions. The principal component analysis showed that soil CO₂ emission was 18% influenced by base saturation (V%) and 14% by pH, especially in the PB area. Additionally, 19% was affected by carbon and macroporosity in the 5- and 10-year green harvest areas, respectively. From our results, it can be concluded that the most CO₂ emissions are in the areas of sugarcane green, this is due to the higher carbon concentration when compared with the area of burning sugarcane. The parameters that most influenced the CO₂ emissions were bulk density, porosity, macroporosity, pH and V%.     

An investigation of links between metabolic rate and feed efficiency in European sea bass Dicentrarchus labrax

Feed efficiency (FE) is the amount of body weight gain for a given feed intake. Improving FE through selective breeding is key for sustainable finfish aquaculture but its evaluation at individual level is technically challenging. We therefore investigated whether individual routine metabolic rate (RMR) was a predictor of individual FE in the European sea bass Dicentrarchus labrax, a major species in European mariculture. The European sea bass has three genetically distinct populations across its geographical range, namely Atlantic (AT), West Mediterranean (WM), and East Mediterranean (EM). We compared FE and RMR of fish from these three populations at 18 or 24 °C. We held 200 fish (62 AT, 66 WM, and 72 EM) in individual aquaria and fed them from ad libitum down to fasting. FI was assessed for an ad libitum feeding rate and for a fixed restricted ration (1% of metabolic body weight·day⁻¹, with metabolic body weight = body weight^0.8). After being refed 12 wk in a common tank, individual RMR was measured over 36 h by intermittent flow respirometry. There was a significant effect of temperature whereby fish at 18 °C had greater mean FE (P < 0.05) and lower RMR (P < 0.001). There was also a significant effect of population, where AT fish had lower FE (P < 0.05) and greater RMR (P < 0.001) than WM and EM, at both temperatures. Despite these differences in temperature and population means, individual FE and RMR were not significantly correlated (P > 0.05). Therefore, although the results provide evidence of an association between metabolic rate and FE, RMR was not a predictor of individual FE, for reasons that require further investigation.