Utilization of biochar impregnated with anaerobically digested slurry as slow‐release fertilizer

We examined the possibility of an environment‐friendly slow‐release fertilizer (SRF) made of biochar impregnated by anaerobically digested slurry. The biochar materials were produced from three types of feedstocks (orange peel, residual wood, water‐treatment sludge) at different temperatures of 300°C, 500°C, and 700°C via pyrolysis. The release behaviors of the water‐soluble K⁺, Ca²⁺, and Mg²⁺ were similar for all impregnated biochars and the commercial SRF used. The water‐retention capacity was greatly improved by mixing the biochar‐SRF with the soil. The yield of lettuce was lower for the biochar‐SRF applications of 3.7 to 34.2 t ha^–1 than for the commercial SRF application of 51.4 t ha^–1. This might be due to excessive increase of soil pH for the biochar‐SRF application. Based on these results, the authors concluded that the biochar impregnated with nutrients could become an effective slow‐release K⁺ fertilizer.     

A Laboratory Column Study on the Biodegradation of Toluene and Methyl tert–Butyl Ether: The Effect of Substrate Interactions

Soil vapor extraction (SVE) is one of the most effective remediation technologies for soil and groundwater contamination. Soil particles can be mobilized by air perturbation during SVE, resulting in the differentiation of porous media, which has not been well addressed. This paper developed a numerical method to study the flow pattern and quantify the change of porous media for the first time. Based on the mass equilibrium and Darcy’s law, a two-phase water–air flow model was constructed with integration of saturation, relative permeability, and capillary pressure during SVE. Relationship between porosity and saturation was deduced and coupled with the two-phase flow model for quantifying change of porous media in real time. Results reveal that both porosity and permeability increase sharply in the early stage of SVE then gradually to a quasi-steady state. These increases in vadose zone tapered off with distance from the SVE screen and the steady period occurred later as well. The influence radius of a single SVE well and the change degree in porosity and permeability of media were proportional to the extraction vacuum and the driving coefficient C, which is more sensitive than extraction vacuum according to the simulation results. Knowledge from this modeling exercise provides a useful tool to estimate the change of remediated zone and assess the environmental risk of remedial activities at real-world contamination sites.     

Biochar-induced changes in soil properties affected immobilization/mobilization of metals/metalloids in contaminated soils

Purpose

Remediation of metal contaminated soil with biochar is attracting extensive interest in recent years. Understanding the significance of variable biochar properties and soil types helps elucidating the meticulous roles of biochar in immobilizing/mobilizing metals/metalloids in contaminated soils.

Materials and methods

Six biochars were produced from widely available agricultural wastes (i.e., soybean stover, peanut shells and pine needles) at two pyrolysis temperatures of 300 and 700 °C, respectively. The Pb-, Cu-, and Sb-contaminated shooting range soils and Pb-, Zn-, and As-contaminated agricultural soils were amended with the produced biochars. The mobility of metals/metalloids was assessed by the standard batch leaching test, principal component analysis and speciation modeling.

Results and discussion

The changes in soil properties were correlated to feedstock types and pyrolysis temperatures of biochars based on the principal component analysis. Biochars produced at 300 °C were more efficient in decreasing Pb and Cu mobility (>93 %) in alkaline shooting range soil via surface complexation with carboxyl groups and Fe-/Al-minerals of biochars as well as metal-phosphates precipitation. By contrast, biochars produced at 700 °C outperformed their counterparts in decreasing Pb and Zn mobility (100 %) in acidic agricultural soil by metal-hydroxides precipitation due to biochar-induced pH increase. However, Sb and As mobility in both soils was unfavorably increased by biochar amendment, possibly due to the enhanced electrostatic repulsion and competition with phosphate.

Conclusions

It is noteworthy that the application of biochars is not equally effective in immobilizing metals or mobilizing metalloids in different soils. We should apply biochar to multi-metal contaminated soil with great caution and tailor biochar production for achieving desired outcome and avoiding adverse impact on soil ecosystem.

     

水稻ARF基因家族新成员ADP-Ribosylation Factor-Like Protein 5(OsARFL5)的克隆及表达分析

小G蛋白家族中的亚家族ADP-核糖基化因子(ADP-ribosylation factor, ARF),在生物体内起众多的生理作用,参与基因表达、细胞骨架重组装、微管的形成以及囊泡和核孔运输等。本研究已成功克隆得到ARF基因家族中的一个新基因OsARFL5,系统进化分析表明该基因与SiARFC1亲缘关系较近;以该基因和其启动子序列构建了两种遗传转化表达载体(pOsARFL5::GUS, pCaMV35S::OsARFL5:EGFP),并获得了相应遗传载体的转基因植株;GUS染色结果表明,该基因在不同时期、不同组织部位表达;洋葱表皮亚细胞定位结果显示,Os ARFL5基因编码的蛋白定位在细胞核。RT-PCR结果显示,OsARFL5在水稻不同生育期的根、茎、叶、叶鞘和穗子中均有不同程度的表达。本研究初步探明了ARF基因家族新成员OsARFL5在水稻生长发育过程中的表达模式。     

SNP Markers Discovery in Soybean with Use of Degenerate Oligolucleotide Primed PCR

There are several strategies that can be applied in SNP discovery, as for example the locus-specific amplification of target genome regions （Primmer et al., 2002; Van et al., 2004） or simultaneous assembly of anonymous sequences which are the product of whole genome shotgun sequencing （Webber and Myers, 1997） or reduced representation shotgun sequencing （Altshuler et al., 2000）. The majority of these methods are highly cost-prohibitive, however, and there is a necessity for development of new strategies that would be more suitable for small and medium-scale laboratories.     

DNA profiling and genetic diversity of Korean soybean (<Emphasis Type="Italic">Glycine max</Emphasis> (L.) Merrill) landraces by SSR markers

Approximately 7,000 accessions of Korean soybean (Glycine max (L.) Merrill) landraces, largely composed of three collections, the Korea Atomic Energy Research Institute’s soybean (KAS), the Korean Crop Experiment Station’s soybean (KLS) and the Korean Agricultural Development and Technology Center’s soybean (KADTC) collections, have been conserved at the Rural Development Administration (RDA) genebank in Korea. The accessions within collections were classified based on their traditional uses such as sauce soybean (SA), sprouted soybean (SP), soybean for cooking with rice (SCR), and OTHERS. A total of 2,758 accessions of Korean soybean landraces were used to profile and to evaluate genetic structure using six SSR loci. A total of 110 alleles were revealed by at the six SSR loci. The number of alleles per SSR locus ranged from 9 to 39 in Satt187 and Satt_074, respectively. The number of alleles ranged from 87 in the KADTC collection to 96 in the KLS collection, and from 63 in the SCR group to 95 in the SP group. Nei’s average genetic diversity ranged from 0.68 to 0.70 across three collections, and 0.64 to 0.69 across the usage groups. The average between-group differentiation (G _st) was 0.9 among collections, and 4.1 among the usage groups. The similar average diversity among three collections implies that the genetic background of the three collections was quite similar or that there were a large number of duplicate accessions in three collections. The selection from the four groups classified based upon usage may be a useful way to select accessions for developing a Korean soybean landrace core collection at the RDA genebank. DNA profile information of accessions will provide indications of redundancies or omissions and aid in managing the soybean collection held at the RDA genebank. The information on diversity analysis could help to enlarge the genetic diversity of materials in breeding programs and could be used to develop a core collection.     

Isolation and characteristics of eight novel polymorphic microsatellite loci from the genome of garlic (Allium sativum L.)

Here we characterized eight novel polymorphic SSR markers, developed from an enriched genomic library of garlic (Allium sativum L.). These SSRs produced a total of 64 alleles across 90 garlic accessions, with an average of 8 alleles per locus. Values for observed (H_O) and expected (H_E) heterozygosity ranged from 0.16 to 0.77 (mean = 0.44) and from 0.22 to 0.86 (mean = 0.65), respectively. Six loci deviated significantly (P < 0.05) from Hardy–Weinberg equilibrium (HWE). The averages of gene diversity and PIC values were 0.65 and 0.62, respectively. The mean genetic similarity coefficient was 0.4380, indicating that among garlic accessions existed wide genetic variation. Based on 64 alleles obtained by 8 SSRs, a phenogram was constructed to understand the relationships among the 90 accessions. These newly developed SSRs should prove very useful tools for genotypes identification, assessment of genetic diversity and population structure in garlic.     

Effects of AMF inoculation on growth of Panax ginseng C.A. Meyer seedlings and on soil structures in mycorrhizosphere

We aimed to investigate the effects of inoculating Panax ginseng C.A. Meyer seedlings with arbuscular mycorrhizal fungi (AMF) by examining the root colonization, plant nutrition uptake, growth characteristics, and soil aggregation of P. ginseng seedlings inoculated at the time of transplantation. At 16 weeks, the AMF spore density per 30 g of fresh mycorrhizosphere in seedlings inoculated with AMF (AMF+ seedlings) was 256.8 and that in seedlings not inoculated with AMF (AMF− seedlings) was 186.3, respectively. The colonization rate of AMF in the lateral roots of AMF+ seedlings was approximately 19% higher than that in the lateral roots of AMF− seedlings. The patterns of AMF colonization in ginseng roots were similar to those of the Paris-type mycorrhizal association. Plant growth characteristics, such as plant height, root length, leaf area, number of lateral roots, fresh weight of shoots and roots, and chlorophyll content, were significantly enhanced in AMF+ seedlings compared to AMF− seedlings. The macronutrient content (P, K, and Ca) and micronutrient content (Cu, Fe, and Zn) of both shoots and roots were also significantly higher in AMF+ seedlings compared to AMF− seedlings. Furthermore, glomalin content and soil aggregation were significantly enhanced in AMF inoculated areas. Our results indicate that AMF inoculation may enhance the growth of ginseng seedlings by improving the uptake of mineral nutrients and the soil structure in mycorrhizosphere.     

Effects of post-harvest foliar boron and calcium applications on subsequent season's pollen germination and pollen tube growth of pear (Pyrus pyrifolia)

The primary objective of this study was to evaluate the effects of foliar boron and calcium application after harvest on the quantity and activity of pollen in the ‘Housui’ and ‘Wonwhang’ pears on a subsequent year. Pollen grains of the ‘Housui’ pear were cultured on germination medium, to which had been added boric acid (0, 25, 75, 100, 200, 300, 400, and 500 mg L⁻¹) and calcium nitrate (0, 10, 25, 50, 100, 150, 200, 250, 300, 400, and 500 mg L⁻¹). Boric acid, which was added to the germination media, exerted a significant stimulatory effect on both pollen germination and pollen tube growth, although pollen tube growth was inhibited at higher concentrations than 300 mg L⁻¹. Calcium nitrate addition stimulated pollen germination, except at concentration of 500 mg L⁻¹. However, pollen tube growth was significantly inhibited with increasing concentrations of calcium nitrate. In the orchard experiment, boron and calcium were sprayed at concentrations of 0, 100, 200, 500 or 1000 mg L⁻¹ onto leaves after harvest, respectively. Boron and calcium content in the tissues as well as pollen production and growth were determined after these treatments. The foliar application of boron mainly resulted in an increase of boron concentration in buds. It also induced an increase in the weight of the anther and pollen in the following year. On the other hand, the foliar application of calcium resulted in an increase of calcium concentration mainly in the leaves, but pollen weight was decreased at high concentration treatment in the following year. The germination rate and tube growth of collected pollen were highest in the trees which had received boron treatment at a concentration of 200 mg L⁻¹. In contrast, the germination rate and tube growth of collected pollen were decreased by calcium application at concentrations of 500 and 1000 mg L⁻¹ without significant increase at lower concentrations. Consequently, the accumulation of boron in the developed buds of pear trees subjected to post-harvest foliar boron application generated positive effects on both the quantity and quality of pollen in the following year.     

Effects of ethylene,abscisic acid and auxin on fruit abscission in water dropwort (Oenanthe stolonifera DC.)

Fruit abscission in water dropwort (Oenanthe stolonifera DC.) was investigated by measuring fruit removal force (FRF) affected by fruit ages and plant hormones. FRF decreased rapidly 30 days after anthesis (DAA). Ethylene evolution increased rapidly at 35 DAA and ABA concentration increased gradually after 20 DAA. ACC and ethephon decreased the FRF of fruit explants and the promoting effect of ACC was delayed by silver thiosulphate and cycloheximide, but not by norbornadiene and actinomycin D. ABA enhanced fruit abscission without increasing ethylene evolution. However, the observation that CoCl₂ delayed abscission induced by ABA indicates possible involvement of ethylene in the ABA effect. Treatment with NAA, fenoprop and IAA had no effect on 30 DAA fruit explants, but IAA delayed abscission of 25 DAA explants. This suggests that the effect of auxins may differ with fruit age when used as control agents.