淮北地区氮肥群体最高生产力水稻钾素吸收利用特征

以淮北地区有代表性的34个中熟中粳品种为试材,设置7个氮肥水平(0、150.0、187.5、225.0、262.5、300.0、337.5 kg hm~(–2)),得出各品种的最高产量,将该最高产量定义为氮肥群体最高生产力。在此基础上,明确处于顶层水平(≥10.50 t hm~(–2))、高层水平(9.75~10.50 t hm~(–2))、中层水平(9.00~9.75 t hm~(–2))和底层水平(≤9.00 t hm~(–2))水稻品种的钾素积累、分配及转运特征。结果表明,4个生产力等级水稻品种地上部植株、茎鞘和叶片的含钾率在拔节期最高;抽穗期顶层水平品种的这3个参数高于其他3个等级的品种;穗部含钾率差异不显著。随着氮肥群体生产力等级的提高,钾素总积累量增多;拔节前底层水平钾素积累量最多,两年平均为120.56 kg hm~(–2),比例占50.56%,顶层水平为最少,两年平均为108.02 kg hm~(–2),比例占35.99%;拔节至抽穗期和抽穗至成熟期顶层水平钾素阶段积累量及比例显著高于其他3个等级。移栽至拔节期,钾素积累速率为中层底层高层顶层水平,拔节后则为顶层高层中层底层水平。叶片的钾素转运量及转运率明显高于茎鞘;顶层水平叶片的钾素转运量高于其他3个等级,高层水平叶片的转运率最高;穗部增加量随生产力等级的递增而变大;抽穗到成熟期,茎鞘、叶片对穗的钾素转运贡献率表现为底层最高,中层次之,顶层最低。4个等级水稻品种籽粒生产率和百千克籽粒吸钾量差异不显著;钾素偏生产力和钾收获指数均表现为顶层高层中层底层水平。总之,氮肥群体最高生产力越高,水稻中后期植株钾素积累量及器官对钾素的吸收利用效率越显著。抽穗后保持较高的钾素吸收利用及转运效率是高产水稻品种的重要特征。     

我国农业机械化现状及发展趋势

农业发展问题是中国经济增长的根本问题,在经济发展过程中,农业对国民经济具有不可替代的贡献作用.农业机械是现代农业的基础装备,对提高农业劳动生产率、增加农产品供给、保证农业稳步发展起了到至关重要的作用.为此,文章论述了中国农业机械化的现状,探讨了今后中国现代农业机械化的发展趋势,以期为我国农业机械行业的发展提供一定的参考.     

A bayesian model for the analysis of lactation curves of dairy goats

This article aims to determine the effect of certain covariates, such as season of kidding, parity, and time of kidding on the characteristics of the lactation curve of Saanen dairy goats. Characteristics investigated are peak milk yield, time of peak milk yield, total milk production, persistency, and the relationship between fat and protein in milk composition, as well as between lactation curves of the same animal in successive years. The analysis is carried out using a hierarchical Bayesian approach, together with Wood’s model, to model lactation. Posterior distributions of quantities of interest are obtained by means of the Markov chain Monte Carlo (MCMC) methods. These clearly illustrate the significant effect of especially parity, but also season and time of kidding on the characteristics of the lactation curve. Total and peak milk yield increase with increasing parity up to about the third or fourth parity, while peak yield is later for first than for later parities. The analysis also enables estimation of lactation characteristics of untested animals, prediction of future characteristics and identification of exceptional animals.     

Recovery of cover-crop-N in the soil-plant system in the Guinea savannah zone of Ghana

In order to understand the efficiency of residue-N use and to estimate the minimum input required to obtain a reasonable level of crop response, it is important to quantify the fate of the applied organic-N. The recovery of N from ¹⁵N-labelled Crotalaria juncea was followed in the soil and the succeeding maize crop. Apparent N recovery (ANR) by maize from unlabelled Crotalaria juncea, Crotalaria retusa, Calopogonium mucunoides, Mucuna pruriens and mineral fertilizer at three locations were also evaluated. The maize crop recovered 4.7% and 7.3% of the ¹⁵N-labelled C. juncea-N at 42 days after sowing (DAS) and at final harvest, respectively. The corresponding ¹⁵N recovery from the soil was 92.4% and 58.5%. The highest mean ANR of 57.4% was with mineral fertilizer, whereas the mean ANR of 14.3% from C. retusa was the lowest. A large pool substitution and added-N interaction effect was observed when comparing N recovery from the labelled and unlabelled C. juncea. The amount of residue-N accounted for by the isotope dilution method at 42 DAS was 97.1% and at final harvest 65.8%. The large residue-N recovery in the soil organic-N pool explains the residual effect usually observed with organic residue application.     

Nitrogen and carbon mineralisation of leather meal in soil as affected by particle size of fertiliser and microbiological activity of soil

Carbon and nitrogen mineralisation of leather meal fertilisers were studied in two soils characterised by different respiration activity. Both C and N mineralisation were highest in the most active soil, and when leather meal was added as a powder rather than as 2- to 4- and 4- to 6-mm particles. Fast and slow soluble N pools were determined after extraction with cold water and with hot buffer, respectively. The N remaining after the second extraction with hot buffer was named slow-release N. The percentage of slow-release N rose as the size of the applied leather meal particles increased, whereas fast soluble N was highest in the coarsest (4-6 mm) fertiliser.     

Effect of harvesting and drying conditions on chlorophyll levels of soybean (Glycine max L. Merr)

Chlorophyll in soybean represents a downgrading factor for the crops. Five Brazilian cultivars were harvested between R(6) and R(8) stage of development (Fehr & Caviness scale) and dried at 25 degrees and 40 degrees C. The effect of maturity stages and two drying conditions after harvest were studied to achieve reduction of moisture and chlorophylls to acceptable levels. When seeds were dried at 25 degrees C, even harvesting at early stages of development such as R(6), the green pigments were almost degraded, and 16 ppm of chlorophyll were found at maximum, accompanied by loss of moisture. Moisture and chlorophyll declines as seed matures, but at intermediary stages (R(6)-R(7)), chlorophyll degrades first, so the rate of moisture loss should not be used to predict chlorophyll contents. At 40 degrees C, complete degradation of chlorophyll pigments is only achieved when seeds are swathed from R(7) stage up, otherwise the seed quality could be compromised. Slow drying allows almost complete removal of green pigments, even when seeds are swathed a few days before the physiological maturity stage.     

Effect of bensulfuron-methyl (a sulfonylurea herbicide) on the soil bacterial community of a paddy soil microcosm

The effect of bensulfuron-methyl (BSM) on a soil microbial community in a model paddy microcosm was studied. Total bacterial numbers in the overlying water and surface soil were monitored for 2 months after the application of BSM at the field rate and a ten-fold field rate. Pentachlorophenol (PCP) was used for comparison. Neither chemical affected the total bacterial numbers remarkably, either in the overlying water or in the surface soil. In contrast, the nitrification potential was significantly suppressed by the BSM application. The bacterial community structure, as evaluated by the denaturing gradient gel electrophoresis (DGGE) of PCR amplification products from bacterial 16S rDNA, was unaffected by the BSM treatments over 8 weeks in the surface soil, compared with the control (no pesticide). In contrast, the surface soil exposed to PCP at a ten-fold field rate showed different patterns from the controls at 4 weeks and 8 weeks after application. The DGGE patterns of the overlying water were much more variable than those of the surface soil in any treatments. Cluster analysis showed that the BSM plots were classified within the same group as the control at 1 week after application and that the BSM and PCP plots from 2 weeks onward after application were grouped differently from the control. Of 22 clones excised from the DGGE gels, 20 clones belonged to the Proteobacteria and two belonged to the Verrucomicrobia. It was considered that the impact of BSM on the overall microbial community (total numbers, community structure of soil) was negligible, although BSM had an impact on some specific functions of the soil microbial community (nitrification) and a part of the community (overlying water).     

冬播麦区Glu-1和Glu-3位点变异及1B/1R易位与小麦加工品质性状的关系

 贮藏蛋白组成是决定小麦加工品质的重要因素。本文调查了我国冬播麦区251份主栽品种和高代品系的高分子量麦谷蛋白亚基（HMW-GS）、低分子量麦谷蛋白亚基（LMW-GS）和1B/1R易位的分布状况，研究了它们与加工品质性状的关系。结果表明，品质较差的HMW-GS N、7+9、2+12和LMW-GS Glu-A3a与Glu-B3j（1B/1R易位）在冬播麦区分布较广，频率分别为39.4%、45.0%、59.8%、37.1%和44.6%。HMW-GS和LMW-GS等位变异对籽粒蛋白质含量影响较小，对SDS沉降值、和面时间与耐揉性的加性和互作效应达1%的显著水平。按位点对加工品质性状的贡献大小，Glu-D1>Glu-B3>Glu-B1>Glu-A3>Glu-A1；就单个亚基而言，Glu-A1位点，1>2*>N；Glu-B1位点，7+8>14+15>7+9；Glu-D1位点，5+10>4+12>2+12；Glu-A3位点，Glu-A3d>Glu-A3a>Glu-A3c>Glu-A3e，Glu-B3位点； Glu-B3d>Glu-B3b>Glu-B3f >Glu-B3j。1B/1R易位对SDS沉降值、和面时间和耐揉性等加工品质性状有显著负面效应。通过选择优质高低分子量麦谷蛋白亚基和淘汰1B/1R易位系，将有助于提高我国小麦的面筋质量。     

大豆抗菌核病的全基因组关联研究

找到大豆与抗菌核病强关联的候选位点或候选基因,为抗病基因克隆和抗病分子标记开发提供借鉴,服务大豆抗菌核病育种。对126个加拿大大豆品种的基因组DNA用ApekⅠ酶消化后Illumina Hiseq2000平台测序进行基因分型,供试的126个材料用棉垫接种核盘菌菌丝体进行表型鉴定。采用Structure 2.3.4、SPSS 20.0、TASSEL 5.0和PLINKv 1.07软件分别模拟群体遗传结构、二元主成分分析、邻接法聚类,进行SNP-phenotype和Haplotype-phenotype的关联分析(只考虑加性效应)。最小等位基因频率0.01过滤,得到30 125个SNPs。主成分及群体结构聚类结果中度一致,将126个供试材料划分为2个组群,Kappa聚类一致度检验K=0.44。邻接法(The neighbor-joining algorithm,NJ)聚为3个组群。α≤0.05时,在单个SNP-phenotype的关联研究中,最强关联在3号染色体物理位置34387780、34387823和34387841处(P值都为8.669E-7),可分别解释表型变异的17.80%,其次在20,1,4,17号染色体上。Haplotype-phenotype的关联分析中,最强关联在17号染色体物理位置5575883/5647814/5648648/5734897处(P值为1.038E-6),可解释表型变异的17.56%。200 kb范围内,3号染色体上的候选基因有Glma.03g129100、Glma.03g129200、Glma.03g129300、Glma.03g129500、Glma.03g129800、Glma.03g129900。17号染色体上为Glma.17g071300、Glma.17g072200、Glma.17g073300。