太阳能干燥装置设计及热研2号柱花草低温干燥试验

利用太阳能空气集热器、干燥仓、传感系统、控制系统、鼓风机等自行设计了太阳能干燥平台,在此平台上进行热研2号柱花草低温干燥试验,研究实时太阳辐射下的集热器接收辐射强度、干燥仓进出口温度、相对湿度、温度差、湿度差等对柱花草干燥的影响。试验结果表明:牧草干燥大致分为3个阶段,牧草含水率在3个阶段的干燥速率约为0.243、0.140 5、0.039 2%/min,牧草干燥效率较自然日晒显著提高。通过干燥参数和牧草质量变化的散点图,建立多元线性线性回归方程,相关系数为0.986 5,与试验结果符合良好,有助于进一步对干燥工艺进行优化。     

Subsurface drip irrigation of onions: Effects of drip tape emitter spacing on yield and quality

Improved irrigation water use efficiency is an important component of sustainable agricultural production. Efficient water delivery systems such as subsurface drip irrigation (SDI) can contribute immensely towards improving crop water use efficiency and conserving water. However, critical management considerations such as choice of SDI tube, emitter spacing and installation depth are necessary to attain improved irrigation efficiencies and production benefits. In this study, we evaluated the effects of subsurface drip tape emitter spacing (15, 20 and 30 cm) on yield and quality of sweet onions grown at two locations in South Texas—Weslaco and Los Ebanos. Season-long cumulative crop evapotranspiration (ETc) was 513 mm in Weslaco and 407 mm at Los Ebanos. Total crop water input (rain + irrigation) at Weslaco was roughly equal to ETc (92% ETc) whereas at Los Ebanos, water inputs exceeded ETc by about 35%. Onion yields ranged from 58.5 to 70.3 t ha⁻¹ but were not affected by drip tube emitter spacing. Onion pungency (pyruvic acid development) and soluble solids concentration were also not significantly influenced by treatments. Crop water use efficiency was slightly higher at Weslaco (13.7 kg/m³) than at Los Ebanos (11.7 kg/m³) partly because of differences in total water inputs resulting from differences in irrigation management. The absence of any significant effects of drip tape emitter spacing on onion yield may be due to the fact that irrigation was managed to provide roughly similar irrigation amounts and optimum soil moisture conditions in all treatments.     

河西走廊戈壁植物特征及其与沙漠植物的差异

戈壁与沙漠同属于荒漠土地类型，其植物生长互相交叉。为揭示戈壁植物与沙漠植物的差异，以甘肃河西走廊为例，运用戈壁调查资料和沙漠调查资料做了初步分析。结果表明:河西走廊戈壁分布的有15个科47种，其中以藜科、蒺藜科、豆科和菊科较多。典型戈壁植物主要有红砂、骆驼刺、戈壁藜、珍珠猪毛菜、松叶猪毛菜和膜果麻黄等。戈壁植物与沙漠植物的区别:典型戈壁植物的垂直根系十分发达，水平根系相对较弱，且一般不具备根蘖能力；典型沙漠植物的水平根系十分发达，一般都具有很强的根蘖能力，且喜欢风蚀沙埋，沙埋后能产生不定根，风蚀的根茎可产生枝叶。该文不仅为研究荒漠植物的土壤生态类型和植物的迁地保护以及引种驯化研究提供理论基础，而且在荒漠植被保护中具有现实意义。      

Effect of water deficit in different growth stages on stem sap flux of greenhouse grown pear-jujube tree

The effects of water deficit in different fruit growth stages on the variation of stem sap flux of 6-year old greenhouse-grown pear-jujube trees were investigated. Treatments included sufficient water supply during the whole fruit-growing period (T₁), mild water deficit during the flowering–fruit setting stage (T₂), moderate water deficit during the fruit rapid growth stage (T₃) and severe water deficit during the fruit maturing stage (T₄). Results showed that significant compensation effect on stem sap flux after re-watering was observed in T₂, but not in T₃ and T₄ stages. At the end of rapid growth stage, the diurnal variation of stomatal conductance generally had a similar trend as that of stem sap flux, but with a distinct midday depression from 12:00 to 14:00 p.m. In addition, a linear relationship between the relative available soil water content (RAWC) and the ratio of daily stem sap flux to that of sufficient water treatment was observed (R² = 0.4489).     

小麦提前造墒灌水对玉米后期光合与产量的影响

于2011—2012年玉米生长后期,进行小麦分期提前造墒灌溉(设置9月20日、9月25日、9月30日灌溉3个水平,不灌水为对照,分别用I9.20、I9.25、I9.30和CK表示)单因素试验,研究小麦提前造墒灌溉对夏玉米后期光合与产量的影响。结果表明:玉米后期穗位叶净光合速率(Pn)日变化,CK为"双峰"曲线,其他处理为"单峰"曲线。Pn日变化均值以I9.20与I9.25处理较高,2年同品种处理间棒3叶叶源量(LSC)也以I9.20与I9.25处理较高。与光合特性不同,茎秆糖分含量以CK较高,其他处理较低。不同灌水模式还对玉米灌浆有一定影响,I9.20、I9.25处理的最大灌浆速率及灌浆平均速率较大,灌浆活跃期较长,快增期百粒质量积累量较多,百粒质量与籽粒产量较高。另外,水分处理还对干物质再分配有一定影响,吐丝后同化物输入籽粒量表现为I9.25I9.20I9.30≥CK。可见,河北平原小麦适期提前造墒灌溉,改善了玉米群体光合性能,促进了吐丝后同化物向籽粒运转,提高了籽粒产量。综上所述,本研究条件下小麦造墒灌水建议提前于9月20—25日。     

基于MSP430F149芯片的便携式发动机窜气量测量仪的研制

介绍了在不解体车用发动机的情况下,通过测试曲轴箱窜气量的大小,即可检测活塞环与气缸壁的磨损程度的一种专用检测仪器,并以EQ6100发动机的结构特点为例,设计了专用测试用传感器,测出了其特性曲线,用低功耗单片机MSP430作为微控制器核心,构造了该测量仪器。测试结果表明:该仪器抗扰能力强,测试精度高,测试简单、方便,为发动机故障诊断提供了依据,用户可把仪器的结构、参数稍加改动即可应用于其它类型发动机的不解体故障诊断,具有一定的通用性。     

基于图形识别的数控机床误差溯因方法

针对数控机床误差溯因方法复杂且适应性差的问题,提出了基于数控系统圆检测图形的特征角点分布规律,并与神经网络相结合实现对机床运动误差的快速溯因方法。首先,提取所生成圆图形的特征角点,构造反向间隙、周期误差等特征矩阵;然后结合神经网络将低维特征矩阵映射至高维特征空间,实现对数控机床误差的快速溯因。实验表明,该方法简单有效,误差识别准确率较高,且具有较强的通用性。     

脉宽调制型变量喷雾系统雾量沉积分布

通过实验和理论分析建立了雾量分布模型,研究了雾量分布规律。研究表明:喷杆方向沉积变异系数在两喷头之间出现最低,而在两喷头正下方出现极高值;行驶方向的沉积变异系数沿着一定规律周期性变化,其周期与占空比相关;在相同压力的情况下,同一喷头的行驶方向及喷杆方向沉积变异系数的峰值均随着车速的提高而上升,随占空比的上升而下降;在研究范围内(40~60cm),变异系数的峰值随喷头高度的升高而降低;若车速和占空比均相同,110°扇形喷头的雾量分布较80°扇形喷头在时空方向上都更加均匀。     

脱粒部件数学模型的建立与模拟

对传统型联合收割机核心工作部件“脱粒－分离部件”的工作机理进行了理论分析，推导出反映其工作过程的数学模型，为脱粒－分离部件工作性能的计算提供了理论工具。     

中国对虾育苗时间与温度的关系及其应用

根据多年的调研和试验资料，利用非线性积温模型，模拟了对虾幼体各发育阶段所需天数与水温的关系。在此基础上研究确定了亲虾产卵孵化期的气候决策模式；并应用模式计算出了我市亲虾产卵孵化的适宜时段。为亲虾适宜产卵孵化期的决策提供了科学方法。