应用液态悬浮芯片技术建立17种大肠杆菌耐药基因多重快速检测方法

为建立一种快速、高通量的多重耐药基因检测方法,利用Luminex液态芯片平台,建立了可同时检测17种耐药基因的液态芯片检测方法。该方法对大肠杆菌常见的七大类抗菌药物所对应的17种耐药基因（blaSHV、blaCMY-1、Aph3-IIa-1、aac(6)-Ib-cr、aadA-1、cmlA-1、gyrA、mcr-1、NDM-1、parC、qnrS-1、sul-1、sul-2、sul-3、tetA、tetB、tetX）进行序列分析,随后依次对其设计多重PCR特异性引物,构建特异的阳性质粒作为阳性参比品进行液态芯片检测条件优化,从而进行多重耐药基因液态芯片检测方法的研发。结果显示：成功构建了17种耐药基因的阳性质粒,并建立了两套体系用于检测17种耐药基因。在特异性试验中,两套体系中的检测信号无干扰,具有较高的特异性数值;敏感性试验中,体系一的单一质粒最低检测量为102~104 copies/μL,混合质粒为103~105 copies/μL;体系二的单一质粒最低检测量为102~105 copies/μL,混合质粒为104~106 copies/μL;有效性试验中,液态芯片法与PCR检测结果的Kappa值多在0.60以上,具有高度一致性。结果表明,本研究建立的2套液态芯片检测体系具有高通量、高灵敏和高特异性的优点,可同时对17种耐药基因进行检测,能够达到快速检测的目的。     

Ultrasound-guided modified subcostal transversus abdominis plane block and influence of recumbency position on dye spread in equine cadavers

ObjectiveTo describe and evaluate an ultrasound-guided modified subcostal approach for the transversus abdominis plane (TAP) block in horse cadavers in lateral or dorsal recumbency.Study designProspective, experimental cadaveric study.AnimalsStudy of one preserved foal and eight fresh adult horse cadavers.MethodsThe lateral and ventral abdominal wall of a preserved cadaver was dissected to identify the muscles and nerves. A unilateral standard TAP block technique was performed (60 mL of methylene blue dye–bupivacaine) on a fresh cadaver in right lateral recumbency. A modified subcostal technique was performed on the opposite side using a linear ultrasound transducer and in-plane approach. Injection points (two 30 mL dye) were at the level of the TAP (between the rectus abdominis and transversus abdominis muscles and ventral to the cutaneous trunci muscle) perpendicular to: 1) the mid-point between the xiphoid cartilage and umbilical scar; and 2) at a point between the caudal and middle thirds of the abdomen measured from the first injection point to the umbilical scar. The modified subcostal approach was performed in seven additional cadavers in both hemiabdomens, with three cadavers in lateral and four cadavers in dorsal recumbency. Ultrasound guidance was used with all injections.ResultsThe standard approach stained the sixteenth to eighteenth thoracic nerves (T16–T18). The modified subcostal approach performed in lateral recumbency provided greater spread (T9–T17) than dorsal recumbency (T12–T18) (p = 0.016).Conclusions and clinical relevanceThe modified subcostal TAP approach resulted in extensive staining exceeding the standard approach. The nerves stained are consistent with production of ventral abdominal wall anesthesia in horses. Clinical studies are needed to verify these findings.     

Effects of perioperative saphenous and sciatic nerve blocks,lumbosacral epidural or morphine–lidocaine–ketamine infusion on postoperative pain and sedation in dogs undergoing tibial plateau leveling osteotomy

ObjectiveTo compare the quality of postoperative analgesia and sedation after preoperative saphenous and sciatic nerve blockade, preoperative lumbosacral epidural injection and perioperative intravenous (IV) morphine, lidocaine and ketamine infusions in dogs undergoing stifle arthroscopy and tibial plateau leveling osteotomy (TPLO) under general anesthesia.Study designProspective, blinded, randomized, clinical comparison study.AnimalsA total of 45 dogs weighing 33.9 (15.9–56.7) kg and aged 5.2 (1.0–12.0) years, mean (range), undergoing elective unilateral TPLO for spontaneous cranial cruciate ligament rupture.MethodsClient-owned dogs were enrolled. Dogs were randomly assigned to one of three groups: group MLK, perioperative IV morphine, lidocaine and ketamine infusion; group EPID, lumbosacral epidural with ropivacaine and morphine; or group SSNB, saphenous and sciatic nerve blockade with ropivacaine. Routine stifle arthroscopy followed by TPLO surgery was performed. Sedation and pain scores were assessed at 0, 2, 4, 8 and 24 hours following extubation. Rescue analgesia was administered as prescribed by Glasgow composite pain score–short form score >5.ResultsSedation scores for MLK were higher than EPID and SSNB. Pain scores for SSNB were lower than those for EPID and MLK. No significant differences were found in anesthesia duration or surgery duration among groups. No dogs required rescue analgesia.Conclusions and clinical relevanceAlthough analgesia was adequate in all groups, the best combination of analgesia without increased sedation was recorded for SSNB.     

稻谷籽粒的压缩特性与含水率关系的实验研究

通过Brookfield质构仪测定了不同含水率的稻谷籽粒(含水率为10.63%、12.25%、13.71%、15.18%、16.53%w.b.)在Z轴(短轴)方向上的压缩特性(破坏力、破坏能、表观接触弹性模量、最大接触应力、破坏应变),得出含水率对稻谷压缩特性的影响规律。实验结果表明:随着压缩形变的增加,稻谷籽粒受到的压力逐渐增加,当到达破裂点时达到最大值,随之急剧减小。随着含水率的增加,稻谷籽粒的压缩破坏力、破坏能、表观接触弹性模量、破坏应力逐渐减小,压缩破坏应变逐渐增加。     

冬小麦种质“矮孟牛”中新型小麦-黑麦复杂易位的遗传传递分析

本文利用矮孟牛中一种新型小麦-黑麦复杂易位IRS·7DS,1BL·7DL与1BL·1RS易位所构建的一套重组自交系(包括109个F6株系)和8个矮孟牛衍生品种进行了分析,结果表明在109个F6株系中,纯合复杂易位占69个,纯合1BL·1RS占36个,二者比例约2∶1,杂合类型占4个,出现频率4/109;对矮孟牛8个衍生品种的分析表明,6个品种包含来自矮孟牛的     

Effect of the Nixtamalization Process on the Dietary Fiber Content,Starch Digestibility,and Antioxidant Capacity of Blue Maize Tortilla

Nixtamalization is an ancient process developed by the Mesoamerican cultures. Initially, volcanic ashes were used and then calcium hydroxide in commercial production, and more recently nixtamalization with calcium salts (NCS) has been proposed. The aim of this study was to evaluate the effect of NCS on carbohydrate digestibility and antioxidant capacity in the elaboration of blue maize tortillas. NCS in blue tortillas showed a high amount of total dietary fiber (14.27 g/100 g), the main fraction being insoluble dietary fiber. The contents of resistant starch and slowly digestible starch did not change with the nixtamalization process. The predicted glycemic index value was lower in blue tortillas with the NCS process (58) than with the traditional nixtamalization process (71). In general, NCS in blue tortillas presented a higher antioxidant capacity than traditional tortillas (ferric reducing antioxidant power method), indicating that phenolics present in blue maize maintain their activity after cooking. It can be concluded that the nutraceutical features (high dietary fiber content and antioxidant capacity) of blue maize tortillas are enhanced when they are elaborated with the NCS process.     

Effects of Annealing and Concentration of Calcium Salts on Thermal and Rheological Properties of Maize Starch During an Ecological Nixtamalization Process

The objective of the present work was to study the effect of annealing and concentration of Ca(OH)₂ (lime) and calcium salts on the thermal and rheological properties of maize starch during an ecological nixtamalization process. Thermal and rheological properties of maize starch changed during the ecological nixtamalization process because of three main causes: the annealing phenomenon, type of calcium salt, and calcium salt concentration. In all treatments thermal properties (T_o, T_p, and T_f) of nixtamal starch increased owing to the annealing process, whereas the type of salt or lime increased thermal properties and decreased pasting properties in this order: CaCl₂ > CaSO₄ > Ca(OH)₂ ≈ CaCO₃. This behavior was because of the dissociation of each salt or lime in water. Anions (OH⁻) can penetrate much more easily into the starch granule and start the gelatinization process by rupturing hydrogen bonds. Additionally, amylose‐lipid complexes were formed during the nixtamalization processes, as indicated by an increasing peak at 4.5 Å in X‐ray diffraction patterns.     

插秧机作业面积测量远程监测系统软件设计——基于VisualBasic.NET 2010

为实现对插秧机作业区域自动识别和作业面积的自动测量,实时掌握跨区作业插秧机远程作业面积参量值,以VisualStudio平台上的VisualBasic.NET2010为开发环境,开发了一套高速插秧机跨区作业面积远程测量监测系统软件。该软件功能主要包括GPS定位轨迹及作业区域的识别、面积测量、数据通讯、数据显示和数据存贮。系统采用VisualBasic.NET2010语言进行开发,将远程跨区作业的插秧机面积测量监测数据经由GPRS网络进行无线传输到上位机,并采用SOCKET组件和ADO.NET技术实现系统数据通信,完成PC机与下位机之间数据的传输,对测量结果进行显示存储,同时通过系统误差分析完成系统的可行性判断。     

红薯秧茎破碎还田机的研制

针对红薯秧茎的蔓生性及北方红薯种植模式,研制了适合于垄作红薯秧茎破碎还田机。该机主要由挑秧机构、秧茎破碎装置、刀轴总成、碎秧输送装置和地轮总成等组成。该机由轮式拖拉机牵引,可一次完成秧茎的收割、粉碎、还田等项作业。工作时,动力通过万向节从拖拉机的动力输出轴传出,经过锥齿轮减速器变向增速后,动力分成两路,分别传给秧茎破碎装置、碎秧输送装置和嫩秧切断装置。随着拖拉机前进,秧茎先被挑秧机构挑起,然后被机器前部高悬的旋转圆盘刀切断,高速旋转的破碎刀轴产生负压将切断的秧茎及剩余主干上的薯叶吸进破碎刀轴和护罩间破碎,碎秧落入碎秧输送装置的输送带,被均匀输送抛撒至垄沟。     

2BQM-6型免耕播种机设计及播种深度控制研究

根据北方地区免耕作业的农艺要求,设计了2BQM-6型气吸式免耕播种机,实现了破茬、开沟施肥、播种及覆土镇压等联合作业。在此基础上,针对免耕条件下作业地面平整度较差等因素所造成的播种深度变动大的问题,研究了播种深度调节机构和相应的参数。通过ADAMS软件对播种单体进行建模分析,研究其仿形机构不同参数对仿形效果的影响,寻求最佳仿形时的最优参数范围,以满足不同农作物种植深度不同的要求。该调节装置具有调节范围广、灵活及易于操作等特点。