Genomic prediction for meat and carcass traits in Nellore cattle using a Markov blanket algorithm

This study was carried out to evaluate the advantage of preselecting SNP markers using Markov blanket algorithm regarding the accuracy of genomic prediction for carcass and meat quality traits in Nellore cattle. This study considered 3675, 3680, 3660 and 524 records of rib eye area (REA), back fat thickness (BF), rump fat (RF), and Warner–Bratzler shear force (WBSF), respectively, from the Nellore Brazil Breeding Program. The animals have been genotyped using low-density SNP panel (30 k), and subsequently imputed for arrays with 777 k SNPs. Four Bayesian specifications of genomic regression models, namely Bayes A, Bayes B, Bayes Cπ and Bayesian Ridge Regression methods were compared in terms of prediction accuracy using a five folds cross-validation. Prediction accuracy for REA, BF and RF was all similar using the Bayesian Alphabet models, ranging from 0.75 to 0.95. For WBSF, the predictive ability was higher using Bayes B (0.47) than other methods (0.39 to 0.42). Although the prediction accuracies using Markov blanket of SNP markers were lower than those using all SNPs, for WBSF the relative gain was lower than 13%. With a subset of informative SNPs markers, identified using Markov blanket, probably, is possible to capture a large proportion of the genetic variance for WBSF. The development of low-density and customized arrays using Markov blanket might be cost-effective to perform a genomic selection for this trait, increasing the number of evaluated animals, improving the management decisions based on genomic information and applying genomic selection on a large scale.     

Measuring versus estimating net radiation and soil heat flux: Impact on Penman–Monteith reference ET estimates in semiarid regions

The standardized ASCE Penman–Monteith and FAO-56 equations were used to estimate reference evapotranspiration (ET₀) using estimated and measured net radiation (R_n) and soil heat flux (G), based on hourly and daily meteorological data. The estimates were evaluated against lysimeter measurements. The results indicate that using measured or estimated values of R_n and G can have significant effect on the accuracy of the ET₀ estimations, especially when calculations were made on an hourly basis. The FAO-56 version performed very well during the irrigation season on a daily basis. The use of measured R_n and G did not improve ET₀ estimation on a daily basis, therefore, the use of estimated R_n and G appears to be dependable when calculations are based on 24-h weather data. When daily ET₀ was calculated from hourly estimations, the results were different depending on the version used. The ASCE version was more accurate, especially when R_n and G were measured. Therefore, measurement of R_n and G may have potential to improve estimation only when daily ET₀ is calculated from hourly estimations. The PM FAO-56 version was always a little less accurate than the ASCE version. For hourly calculations, using a constant surface resistance (as in FAO-56 version), the PM method underpredicted for high evaporative demand and vice versa. The ASCE version performed better than PM FAO-56 version when R_n and G were measured and estimated. Therefore, ASCE version tended to provide quite accurate values of hourly ET₀, even using estimated values of R_n and G. As conclusion, the methods proposed by FAO-56 for estimating R_n and G tended to produce accurate estimates for daily and hourly ET₀ under semiarid conditions and can be used with some degree of confidence for estimating ET₀. In addition, results suggest that the ASCE standardized equation on an hourly basis improved the accuracy of ET₀ estimation with respect to the FAO-56 version.     

The effect of salinity on corn yield using the CERES-maize model

In most cases, when calculating soil water availability, only thewater content is considered. The effect of salinity on the wiltingpoint is neglected. The objective of this work is to use asimulation model (CERES-maize) in order to predict cornyields as a function of water salinity under severalenvironmental, agrotechnical, and plant characteristics. A modelis presented in which the wilting point is a function of the soilsalt content. At high salinity, the water content at wilting pointis higher than at low salinity, resulting in an insufficient amountof available water and, therefore, a reduced yield. The modelwas used to simulate several theoretical and experimentalsituations for forage corn and grain corn. Simulation resultsshowed that nitrogen fertilization increases the salinity thresholdvalue and the yield sensitivity (rate of yield reduction per unitof salinity). The also showed that forage corn is more sensitiveto salinity than grain corn. If the soil is not leached, a heaviersoil texture has a higher salinity threshold value. On the otherhand, if the soil is leached, the soil texture has no influence onthe salinity threshold value and the yield is less sensitive tosalinity in sandy soils. The determination coefficient (r²= 0.75) indicated that the results of the simulations were in goodagreement with the field data.     

Outbreak of shoot blight and dieback of Eucalyptus spp., caused by Pseudoplagiostoma eucalypti in Brazil

An outbreak of a new and severe disease was observed in Eucalyptus plantations of Bahia state, Brazil. An Ascomycota fungus has been frequently associated with the main symptoms of the disease namely leaf spot, branch cankers, shoot blight, defoliation, and dieback. Based on morphological characteristics, phylogenetic analysis (ITS and TEF-1α genes), and pathogenicity test on Eucalyptus plants, Pseudoplagiostoma eucalypti was identified as the causal agent of the disease. Although P. eucalytpi has been known from in Brazil since 1998, this is the first report of it causing severe disease and die-back on Eucalyptus spp. and we also record new symptoms associated with the pathogen.     

Total Phenolic Levels,In Vitro Antioxidant Properties,and Fatty Acid Profile of Two Microalgae,Tetraselmis marina Strain IMA043 and Naviculoid Diatom Strain IMA053, Isolated from the North Adriatic Sea

This work studied the potential biotechnological applications of a naviculoid diatom (IMA053) and a green microalga (Tetraselmis marina IMA043) isolated from the North Adriatic Sea. Water, methanol, and dichloromethane (DCM) extracts were prepared from microalgae biomass and evaluated for total phenolic content (TPC) and in vitro antioxidant properties. Biomass was profiled for fatty acid methyl esters (FAME) composition. The DCM extracts had the highest levels of total phenolics, with values of 40.58 and 86.14 mg GAE/g dry weight (DW in IMA053 and IMA043, respectively). The DCM extracts had a higher radical scavenging activity (RSA) than the water and methanol ones, especially those from IMA043, with RSAs of 99.65% toward 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)diammonium salt (ABTS) at 10 mg/mL, and of 103.43% against 2,2-diphenyl-1-picrylhydrazyl (DPPH) at 5 mg/mL. The DCM extract of IMA053 displayed relevant copper chelating properties (67.48% at 10 mg/mL), while the highest iron chelating activity was observed in the water extract of the same species (92.05% at 10 mg/mL). Both strains presented a high proportion of saturated (SFA) and monounsaturated (MUFA) fatty acids. The results suggested that these microalgae could be further explored as sources of natural antioxidants for the pharmaceutical and food industry and as feedstock for biofuel production.     

Near-Infrared Spectroscopy Coupled with Chemometrics Tools: A Rapid and Non-Destructive Alternative on Soil Evaluation

Near-infrared (NIR) spectroscopy is a rapid, non-destructive and accurate technique for analyzing a wide variety of samples, thus, the growing interest of using this technique in soil science. The objective of this study was to evaluate the potential of NIR spectroscopy to predict organic carbon (OC), total nitrogen (TN), available phosphorus (P) and available potassium (K) in the soil. NIR spectra from 20 cm³ of soil samples were acquired on the range of 750 to 2500 nm in diffuse reflectance mode, resolution of 16 cm^?1 and 64 scans. Eight models of calibration/validation were constructed. Calibration and validation models showed that the predictive potential of NIR varied with the specific soil property (OC, TN, P and K) under evaluation and according to the methodology employed in the model construction (cross-validation or test set). Good prediction models were obtained for OC and TN content based on the statistical parameters. Test set methodology was able to predict soil OC, TN, P, and K better than cross-validation methodology.     

Inheritance of Aluminum Tolerance and its Effects on Grain Yield and Grain Quality in Oats (Avena Sativa L.)

Summary Aluminum toxicity due to the cation Al⁺³ is a major factor limiting yields in acid soils. Wide genetic variability to aluminum tolerance is found in oat genotypes. The objectives of this study were to determine the number of genes controlling aluminum tolerance in oats and to verify if any detrimental effects were present of the aluminum tolerance genes on grain yield and grain quality in Al⁺³free soils. Aluminum tolerance was estimated as the average regrowth of the main root after exposure to toxic levels of Al⁺³ in a hydroponic solution under controlled conditions. The number of genes controlling that trait was estimated from the distribution of the average root regrowth frequencies in a population of 333 recombinant inbred lines (RIL's) in generations F_5:6 and F_5:7. The effects on grain yield and grain quality were assessed in a subpopulation of 162 RIL's chosen based on their aluminum tolerance response. Aluminum tolerance in the evaluated population was controlled by one dominant major gene with the tolerant genotypes carying Al _a Al _a and the sensitive ones al _a al _a alleles. No detrimental effects of the Al _a allele on grain yield or grain quality were detected.Part of the Master of Science dissertation of the first author     

Resistance of 57 greenhouse-grown accessions of Lycopersicon esculentum and three cultivars to Tuta absoluta (Meyrick) (Lepidoptera: Gelechiidae)

The aim of this study was to evaluate resistance to Tuta absoluta (Meyrick) (Lepidoptera: Gelechiidae) by antixenosis on 57 Lycopersicon esculentum Mill. accessions from the Horticultural Germplasm Bank (HGB) of Universidade Federal de Viçosa and by the three commercial cultivars (Santa Clara, Moneymaker and TOM-601) under greenhouse conditions. A randomized complete block design was used with three replications. Infestations with T. absoluta adults were performed weekly and the following characteristics were evaluated: number of small, large and total mines/leaf and % of leaves mined at days 60, 75 and 90 after planting. Low infestation occurred at days 60 and 75 but at day 90, infestation was sufficient to evaluate insect damage. Based on these data it was concluded that only accessions HGB-674 and HGB-1497 appeared to be the most promising. In addition, to determine possible chemical causes of resistance, hexane extracts were analyzed at day 90 by gas chromatography/mass spectrometry and the major peaks identified by a mass spectral database using similarity index. Nine hydrocarbons, viz., hexadecane, heptadecane, eicosane, tricosane, 2-methyltricosane, tetracosane, hexacosane, octacosane and triacontane were identified in the hexane extracts in many samples. Tricosane, tetracosane and hexacosane presented significant correlations with the leaves mined. Only tricosane presented a negative correlation with the number of small mines (r = −0.28), total number of mines (r = −0.27) and % of leaves mined (r = −0.22). However, tetracosane and hexacosane presented significant positive correlations (r = 0.25 and 0.24, respectively) with the % of leaves mined.