Sorption of Cr(VI) on the wood of Japanese larch treated with concentrated sulfuric acid

A carbonaceous sorbent was prepared from the wood of Japanese larch (Larix leptolepis) by dehydration with concentrated sulfuric acid in a 69% yield. The abilities of the sorbent to remove Cr(VI) from aqueous solutions were investigated. Research parameters included the initial solution pH, temperature, and initial concentration of Cr(VI) in solution. The removal of Cr(VI) was highly solution pH dependent and was mainly governed by physicochemical sorption under weak acidic conditions. The equilibrium data fit well in the Langmuir isotherm model. The Langmuir constants were calculated at different temperatures, and the sorption capacity increased with rising temperature, indicating the endothermic nature of the Cr(VI) sorption onto the sorbent. The desorption experiments suggest that the Cr(VI) sorption is generally irreversible, owing to strong interaction of HCrO ₄ ⁻ with the active sites of the sorbent.     

First report of trunk rot caused by <Emphasis Type="Italic">Fomitiporia torreyae</Emphasis> in Kyoto prefecture on cultivars of Japanese cedar with no relatedness to ‘Sanbu-sugi’

Trunk rot, caused by Fomitiporia torreyae, is one of the most economically important sap rot diseases on Cryptomeria japonica, especially on a cutting cultivar ‘Sanbu-sugi’. This disease had been reported only from Chiba and Ibaraki prefectures in Japan; however, a similar trunk rot on Japanese cedars was found recently in Kyoto prefecture. We identified the causal agent of the trunk rot on Japanese cedars in Kyoto prefecture, clarified the genotype of ‘Sanbu-sugi’ (sensu stricto) using microsatellite markers, and then investigated the relatedness of these infected cedars with ‘Sanbu-sugi’. The pathogen was identified as F. torreyae by its DNA sequences and morphological characteristics of the fruiting body. The 25 ramets of ‘Sanbu-sugi’ had only one genotype based on eight microsatellite loci. Infected Japanese cedars in Kyoto were comprised of different genotypes and showed no close relatedness to ‘Sanbu-sugi’. This is the first report of trunk rot caused by F. torreyae on cultivars of Japanese cedar with no relatedness to ‘Sanbu-sugi’ outside of Chiba and Ibaraki prefectures and showed the potential for expansion of this disease to Japanese cedar plantations in other areas.     

4种榆科珍稀树种的种苗形态研究及其栽培效果

对琅琊榆、糙叶榆、长序榆、栗叶榆等4种榆科珍稀树种从种子(翅果)到幼苗的形态做了探索性研究,对其形态通过观察、记载而绘制成图。此4种榆科树种的苗木定植3年后经评价,表明在福建来舟林场已引种成功。     

Does streptobacillary arthritis reduce house mouse population density,activity and damage to sorghum crops?

An experiment to examine the effect of streptobacillary arthritis on mouse populations was conducted in maturing sorghum crops in mouse-proofed pens. There were three treatment pens and three control pens in which mice with and without clinical signs of streptobacillary arthritis were introduced, respectively. A constant mouse density (533 mice ha⁻¹) was introduced to the pens by releasing 12 mice in each pen. The sex ratio of introduced mice was also constant by releasing in each pen nine males and three females. Mean track index was lower in treatment pens than in control pens, indicating that streptobacillary arthritis reduced the activity of mice. However, this was not translated into a reduction in other population responses. Mean mouse density at harvest, percentage of female pregnant at harvest, yield loss caused by mice and a feeding index (oil card index) did not differ significantly between treatment and control groups. A plausible explanation for these findings was that mice with the clinical signs might be less active but were able to consume as much grains as mice without the clinical signs because food was in abundant supply.     

Moisture content penetration in wood elements under varying boundary conditions

Knowledge of effects of moisture exposure on timber structures is important for serviceability and load bearing capacity of timber elements and systems. Varying climate affects the moisture content profiles in timber as the relative humidity changes in the ambient air. This paper presents methods for calculation of diffusion based moisture transport and corresponding results on how timber responds to varying moisture with regard to moisture penetration and distribution. The calculations are based on measured outdoor relative humidity and temperature at different climatic locations in Sweden. No remarkably large deviations between the different climatic locations were found in general, which is positive in a design code perspective.     

Transverse shrinkage in G-fibers as a function of cell wall layering and growth strain

Transverse drying shrinkage was measured at microscopic and mesoscopic levels in poplar wood characterised by an increasing growth strain (GS), from normal to tension wood. Results show that: (a) the drying shrinkage, measured as a relative thickness decrease, was significantly higher for G-layer (GL) than for the other layers (OL), GL shrinkage was not significantly correlated with GS, and OL shrinkage was negatively correlated with GS. (b) In gelatinous fibre (G-fibre), lumen size increased during drying and this increase was positively related with GS, but in normal wood fibre, lumen size decreased during drying. These findings suggest that GL shrank outwards (i.e., its internal perimeter increases), so that its shrinkage weakly affected the total cell shrinkage and the mesoscopic shrinkage was controlled by the OL shrinkage which shrank inwards (i.e., its external perimeter decreases). (c) Measurements done on 7 × 7 mm2 thin sections evidenced a negative correlation between transverse shrinkage and GS, significant in T direction but weak in R direction. These observations at both levels allow to discuss the contribution of GL to the mesoscopic shrinkage of tension wood.     

Host selection of small cedar longicorn beetle, <Emphasis Type="Italic">Callidiellum rufipenne</Emphasis> (Coleoptera:Cerambycidae), on Japanese cedar, <Emphasis Type="Italic">Cryptomeria japonica</Emphasis>, in terms of bark water content of host trees

We caught the adults of a secondary wood-boring insect, Callidiellum rufipenne (Motschulsky), on Japanese cedar, Cryptomeria japonica D. Don., trees and logs with manipulated bark water contents to clarify the mechanism of host selection by C. rufipenne. More C. rufipenne were trapped when the bark water content range was ca. 120–200%. Fewer C. rufipenne were trapped at higher and lower bark water contents. These findings indicate that C. rufipenne adults do not simply select weakened or dying trees. Bark water content is one of important factors for C. rufipenne choosing their host for oviposition.     

The Japanese pulp and paper industry: an analysis of financial performance from 1991 to 2001

This article discusses the determinants of profitability expressed as return on capital among Japanese pulp and paper companies. Return on capital is measured as income before tax related to stockholders’ equity. Return on capital has been divided into profit margin and asset utilization rate. The hypothesis is that return on capital can be explained by mill size, productivity, product line, financial situation, and use of wood resources. The dataset consists of 13 larger Japanese pulp and paper companies listed in Pulp &; Paper Statistics. Data on financial performance, production, and use of wood fibers were collected for the period 1991–2001. The average return on equity for the studied companies is 4.2%. Labor productivity has increased quite significantly, from about 600 to 1,000 kg/employee and year. An econometric analysis indicates that the best model fit is found when the asset utilization rate is used as the dependent variable. Significant variables are, among others, asset utilization rate lagged one time period (?), labor productivity (+), capital productivity (?), paper production as a share of total paper and board production (?), total value of assets on the books (?) and solidity (+). This may indicate that the total value of assets on the books is large in relation to the total production of paper, paperboard and pulp.