Development of an air-injection press for preventing blowout of particleboard V: effects of board density and thickness on property of board manufactured from high-moisture particles

Particleboards with thickness of 10 mm and densities of 0.6, 0.7 and 0.8 g/cm³ were manufactured from high-moisture particles using urea–formaldehyde resin and the effectiveness of air injection was examined. The temperature in the 0.6 and 0.7 g/cm³ boards was lower with air injection than without during the initial to middle stages of pressing, while the temperature in the 0.8 g/cm³ board remained lower with air injection than without throughout the entire pressing process. Air injection reduced the pressing time required to manufacture the 0.6 and 0.7 g/cm³ boards and also increased the internal bond strength of boards of all densities. In the 0.6 and 0.7 g/cm³ boards, air injection reduced the modulus of rupture (MOR), while in the 0.8 g/cm³ boards, the MOR was similar between those manufactured by injecting and not injecting air. Air injection was also found to be effective for boards of high densities. The effectiveness of the air injection on thick boards was investigated by manufacturing 20-mm-thick boards of 0.7 g/cm³. Without air injection, it was not possible to manufacture the 20-mm-thick boards, even by extended hot pressing, but air injection allowed the boards to be manufactured by pressing for 16 min. Air injection was also shown to be effective for manufacturing thick boards.     

Performance of particleboard manufactured using air-injection press II: effects of board density and thickness on the performance of board manufactured from low-moisture particles

Particleboards of different densities (0.6, 0.7 and 0.8 g/cm³) and thicknesses (10 and 20 mm) were manufactured from low-moisture particles using an air-injection press. The effects of the air injection on preventing blowout of the boards of different densities and thicknesses were investigated by artificially creating blowout-prone conditions using metal frames. The effects of the air-injection pressure on the board performance were also investigated. 10-mm-thick boards of 0.8 g/cm³ pressed at 170 °C blew out when air was not injected, but were successfully manufactured by injecting air. 10-mm-thick boards at 150 °C showed constant internal bond (IB), regardless of density, but at 170 °C, IB was higher in boards of higher densities. This was likely due to accelerated hardening of the urea–formaldehyde resin at 170 than 150 °C. At both pressing temperatures, low air-injection pressure did not cause blowout and a reduction in board performance. Air injection also prevented the blowout of thick boards of 20 mm and enabled successful manufacture, showing its effectiveness. The IB of the 20-mm-thick board manufactured using the air-injection press exceeded that of 20-mm-thick board manufactured using an ordinary hot press.     

Dimensional stability and strength properties of particleboard produced by a closed-press system

The purpose of this study was to reveal the effects of various levels of mat-moisture content (m.m.c.) and the closed-press system for making single- or three-layer particleboard on the density profile, thickness swelling, specific moduli of elasticity (MOE) and rupture (MOR) and internal bond strength. Internal gas pressure was measured in an enclosed frame; and the larger the m.m.c., the higher the internal gas pressure became. When rising water vapor (steam) struck particles, it plasticized them and cured the adhesive, resulting in improved interparticle contact. The vertical density gradient in the three-layer board was larger than that in the single-layer board. As for thickness swelling by cold-water soaking, the single-layer boards were less affected than the three-layer boards and showed good dimensional stability with increased m.m.c. The open-system boards swelled more than the closed-system boards. The closed-system single-layer board made at high m.m.c. returned nearly to the prime thickness by air-drying after cold-water soaking. Specific MOE and MOR were larger at 15% or 10% m.m.c. than those at other m.m.c. Considerable reductions of specific MOR and MOE of the closed-system three-layer board were observed at 20% or 25% m.m.c.Part of this report was presented at the 45th annual meeting of the Japan Wood Research Society, Tokyo, April 1995 and at the 48th annual meeting of the Japan Wood Research Society, Shizuoka, April 1998     

Cytological and genetical studies on male sterility inCryptomeria japonica D. Don

Genetic male sterility is a useful trait in plant breeding, especially in angiosperm crops such as corn, onion and carrot. We found a male sterile sugi (Cryptomeria japonica D. Don) tree in Toyama, Japan. Pollen of sugi is one of the major causes of pollinosis in Japan. We carried out this research in an attempt to make clear the characteristics and inheritance of this male sterility. Microsporogenesis of the male sterile tree proceeded meiosis, however, the microspores collapsed after they were separated from pollen tetrads in locules, resulting in complete male sterility. Most likely, ethylene evolution was responsible for male sterility expression. Full seed setting in the male sterile tree indicated normal macrosporogenesis. Seeds obtained from crossing between male sterile and normal lines showed relatively high level of germination and their seedlings grew vigorously. The somatic chromosome numbers of 241 germinated seeds, derived from the male sterile tree, were mostly 22, euploid. These results indicated that male sterile tree was different from other similar previously reported trees with low pollen fertility, resulting from triploid or trisomics. Probably, male sterility in sugi is either nuclear genetic male sterility or cytoplasmic male sterility. The study was partially supported by Program for Promotion of Basic Research Actives for Innovative Biosciences.     

Proton Budgets of Forest Ecosystems on Volcanogenous Regosols in Hokkaido,Northern Japan

The proton budgets of deciduous and coniferous forest ecosystems on volcanogenous regosols in Hokkaido, northern Japan, were studied by measuring the biogeochemical fluxes (atmospheric deposition, canopy leaching, vegetation uptake and leaching from soil) at each site during a three year period. The proton budgets were developed for individual compartments of the ecosystem: vegetation canopy, organic and mineral soil layers. At both sites, atmospheric S deposition was the dominant proton source in the vegetation canopy. In organic horizons, dissociation of weak acids (bicarbonate and/or organic acids) and vegetation uptake of base cations were the dominant proton sources, and the net mineralization of base cations was the dominant proton sink. Atmospheric acid deposition was almost neutralized in the forest canopy and organic horizon. At both sites, weathering and/or ion exchange of base cations and protonation of weak acids (mainly bicarbonate) were the dominant proton sinks in the mineral soil. In both organic and mineral soil, internal proton sources (mainly vegetation uptake of base cations and dissociation of weak acids) exceeded external proton sources, indicating that acid deposition was not the main driving force of soil acidification in the studied forest ecosystems.     

Wireless monitoring of blood glucose levels in flatfish with a needle biosensor

A wireless biosensor system was developed for the continuous measurement of blood glucose levels in flatfish. The biosensor was implanted in the interstitial fluid under the scleral surface of the eyeball (EISF) to investigate the relationship between EISF and blood glucose levels. EISF glucose levels were found to be correlated with those in the blood and to be approximately the same as blood glucose levels in the range of 7–25 mg dl⁻¹. A needle-type biosensor was prepared for the continuous EISF glucose monitoring in flatfish. A working electrode was constructed using platinum iridium wire, and glucose oxidase was immobilized to the electrode. The biosensor was inserted into the EISF of flatfish for sensor implantation. A 650-mV potential (vs. Ag/AgCl) was applied by a wireless potentiostat to the working electrode for the amperometric glucose measurement. We investigated whether glucose in the EISF can be determined in vivo. The estimated glucose levels using a one-point calibration method were correlated with actual blood glucose levels. In conclusion, using a wireless biosensor system, we were able to monitor blood glucose levels in flatfish under free-swimming conditions for 16 h.     

Expressed sequence tag analysis of phyllosomas and hemocytes of Japanese spiny lobster Panulirus japonicus

Two complementary DNA (cDNA) libraries were constructed from phyllosomas and hemocytes of adult Japanese spiny lobster Panulirus japonicus and a total of 2,673 expressed sequence tags (ESTs) were obtained. After assembly and clustering, 450 and 458 unique sequences were found from the phyllosoma and hemocyte cDNA libraries, respectively. Of these, 114 and 220 ESTs showed significant homologies with known genes in the National Centre for Biotechnology Information (NCBI) database. The remaining sequences were of unknown function. Immune-related genes found in this study include lectin, proteinase inhibitor, prophenoloxidase, heat-shock protein, antimicrobial peptide, and a few putative defense-related proteins.     

Variations in body condition of green turtles (Chelonia mydas) in two nearby foraging grounds indicate their sensitivity to foraging habitats

相似文献   

Optimum culture conditions of <Emphasis Type="Italic">Rhodomonas</Emphasis> sp. Hf-1 strain as a live food for aquatic animals

Suitable culture conditions for Rhodomonas sp. Hf-1 strain were examined for high productivity. Hf-1 strain was grown in an incubator for 7 days. The factorial experimental design investigated the following 19 variables: temperature (12, 16, 20, 24 and 28 °C), salinity (7, 14, 21, 28 and 35 psu), light intensity (20, 35, 50, 65 and 80 μmol m^?2 s^?1), light color (white, red, green and blue lights), and 3 factorial designs of photoperiod (24L:0D, 16L:8D and 12L:12D light:dark cycle). The cell density and specific growth rates (SGR) were analyzed. The best cell growth was observed under the following culture conditions: temperature of 24 °C, salinity of 21 psu, light intensity of 80 μmol m^?2 s^?1, and white light. In the photoperiod test, the highest cell density of 4.7?×?10⁶ cells ml^?1 was obtained at 24L:0D light:dark cycle, and the SGR was 0.57 μ day^?1 at this time. We found that the Hf-1 strain was able to be cultured in extremely wide culture conditions. These results are expected to serve as a baseline study for culturing the Hf-1 strain in the laboratory and for its use in aquaculture.     

MytiLec,a Mussel R-Type Lectin,Interacts with Surface Glycan Gb3 on Burkitt’s Lymphoma Cells to Trigger Apoptosis through Multiple Pathways

MytiLec; a novel lectin isolated from the Mediterranean mussel (Mytilus galloprovincialis); shows strong binding affinity to globotriose (Gb3: Galα1-4Galβ1-4Glc). MytiLec revealed β-trefoil folding as also found in the ricin B-subunit type (R-type) lectin family, although the amino acid sequences were quite different. Classification of R-type lectin family members therefore needs to be based on conformation as well as on primary structure. MytiLec specifically killed Burkitt''s lymphoma Ramos cells, which express Gb3. Fluorescein-labeling assay revealed that MytiLec was incorporated inside the cells. MytiLec treatment of Ramos cells resulted in activation of both classical MAPK/ extracellular signal-regulated kinase and extracellular signal-regulated kinase (MEK-ERK) and stress-activated (p38 kinase and JNK) Mitogen-activated protein kinases (MAPK) pathways. In the cells, MytiLec treatment triggered expression of tumor necrosis factor (TNF)-α (a ligand of death receptor-dependent apoptosis) and activation of mitochondria-controlling caspase-9 (initiator caspase) and caspase-3 (activator caspase). Experiments using the specific MEK inhibitor U0126 showed that MytiLec-induced phosphorylation of the MEK-ERK pathway up-regulated expression of the cyclin-dependent kinase inhibitor p21, leading to cell cycle arrest and TNF-α production. Activation of caspase-3 by MytiLec appeared to be regulated by multiple different pathways. Our findings, taken together, indicate that the novel R-type lectin MytiLec initiates programmed cell death of Burkitt’s lymphoma cells through multiple pathways (MAPK cascade, death receptor signaling; caspase activation) based on interaction of the lectin with Gb3-containing glycosphingolipid-enriched microdomains on the cell surface.