Soil variability through spatial scales in a permanently disturbed natural spruce-fir-beech forest

Soil variability was assessed in a 74.2-ha area within the Žofínsky prales natural forest. Parameters evaluated for 1765 soil profiles inside 353 graticule plots were as follows: (1) thickness of organic horizons, (2) thickness and form of mineral horizons, (3) humus form (HF), (4) soil taxonomic unit (STU) and (5) anomalies. In addition, soil reaction (pH_KCl) and oxidizable carbon content (C_ox) were measured in the laboratory for 734 samples from the upper mineral (A) and lower mineral (B) horizons. The most frequently occurring humus form was mor followed by moder, hydromor and peaty T-horizon. Entic Podzols, Dystric Cambisols, Haplic Cambisols, Albic Podzols, Histic (or Haplic) Gleysols, Endogleyic Stagnosols, Fibric or Hemic or Sapric Histosols and Stagnic Gleysols were all present at the site despite its homogeneous geological bedrock. Overall coefficient of variance (CV) was lower in terrestrial soils compared with (semi-)hydromorphic soils. Overall variance decreased in both soil groups with increasing depth, as did CV differences between the fine (up to 10 m) and the locality scales. The lowest CV values occurred for C_ox and pH_KCl. The CV values differed between STUs as well. Compared to lower horizons, variograms of upper horizons showed greater autocorrelation at the intermediate spatial scale (10–320 m)—ranging from 50 to 150 m. Semivariance values, however, reached 70–80% of sill already at a distance of 10 m. The most significant factor of variability at all studied spatial scales is presumably the soil disturbance regime, followed by terrain micro-topography and the effect of tree species.     

The influence of heartwood on the pulping properties of Acacia melanoxylon wood

The pulping wood quality of Acacia melanoxylon was evaluated in relation to the presence of heartwood. The sapwood and heartwood from 20 trees from four sites in Portugal were evaluated separately at 5% stem height level in terms of chemical composition and kraft pulping aptitude. Heartwood had more extractives than sapwood ranging from 7.4% to 9.5% and from 4.0% to 4.2%, respectively, and with a heartwood-to-sapwood ratio for extractives ranging from 1.9 to 2.3. The major component of heartwood extractives was made up of ethanol-soluble compounds (70% of total extractives). Lignin content was similar in sapwood and heartwood (21.5% and 20.7%, respectively) as well as the sugar composition. Site did not influence the chemical composition. Pulping heartwood differed from sapwood in chemical and optical terms: lower values of pulp yield (53% vs 56% respectively), higher kappa number (11 vs. 7), and lower brightness (28% vs 49%). Acacia melanoxylon wood showed an overall good pulping aptitude, but the presence of heartwood should be taken into account because it decreases the raw-material quality for pulping. Heartwood content should therefore be considered as a quality variable when using A. melanoxylon wood in pulp industries     

Genetic variation of isolated Picea balfouriana populations from the southeast of the Qinghai-Tibet Plateau

? The objective of this work is to estimate the level of genetic variation and pattern of genetic structure of isolated Picea balfouriana populations.

? Nine SSR markers and six STS markers were assayed in ten natural populations of P. balfouriana, which is a regionally distributed conifer species in the southeast of the Qinghai-Tibet Plateau.

? Expected heterozygosity ranged from 0.592 to 0.710 based on SSRs, and from 0.489 to 0.635 based on STS markers. The SSR and STS markers revealed that 11% and 12% of variation, respectively, was present among populations. However, the SSRs showed no deviation from the Hardy-Weinberg equilibrium (F _IS = ?0.030), unlike the STS markers (F _IS = 0.249). In addition, assignment methods showed that individuals from the same sampling site usually cluster together.

? Our results indicated that the distribution of genetic variation and population genetic structure of P. balfouriana may be attributed to habitat fragmentation and heterogeneous environments caused by the complex topographic environment in the Qinghai-Tibet Plateau. The population genetic information obtained in our study will benefit the development and utilization of appropriate conservation and breeding strategies for P. balfouriana.

     

Variations in growth, survival and carbon isotope composition (delta(13)C) among Pinus pinaster populations of different geographic origins

To evaluate differences in growth and adaptability of maritime pine (Pinus pinaster Ait.), we studied growth, polycyclism, needle tissue carbon isotope composition (delta(13)C) as an estimate of water-use efficiency (WUE) and survival of seven populations at 10 years of age growing in a performance trial at a provenance test site in Escaroupim, Portugal. Six populations were from relatively high rainfall sites in Portugal and southwestern France (Atlantic group), and one population was from a more arid Mediterranean site in Spain. There were significant differences between some populations in total height, diameter at breast height, delta(13)C of bulk needle tissue, polycyclism and survival. A population from central Portugal (Leiria, on the Atlantic coast) was the tallest and had the lowest delta(13)C. Overall, the variation in delta(13)C was better explained by the mean minimum temperatures of the coldest month than by annual precipitation at the place of origin. Analyses of the relationships between delta(13)C and growth or survival revealed a distinct pattern for the Mediterranean population, with low delta(13)C (and WUE) associated with the lowest growth potential and reduced survival. There were significant negative correlations between delta(13)C and height or survival in the Atlantic group. Variation in polycyclism was correlated with annual precipitation at the place of origin. Some Atlantic populations maintained a high growth potential while experiencing moderate water stress. A detailed knowledge of the relationships between growth, survival and delta(13)C in contrasting environments will enhance our ability to select populations for forestry or conservation.     

Cellular structure and chemical composition of cork from the Chinese cork oak (Quercus variabilis)

Quercus variabilis Blume, the Chinese cork oak, is an oak species with a thick cork outer bark. The cork is exploited at a limited scale in China and considered of lower quality than the commercial cork from Quercus suber. We studied an industrial cork granulate feedstock of Q. variabilis in relation to cellular structure and chemical composition and compared it to Q. suber cork under a material’s perspective. The cork of Q.variabilis has 1.1 % ash, 9.6 % extractives, 34.8 % suberin and 19.1 % lignin. The monosaccharide composition with shows a predominance of hemicelluloses: glucose 42.8 % of total neutral sugars, xylose 27.5 %, arabinose 15.4 %, galactose 9.0 %, mannose 4.0 %, rhamnose 1.2 %. The FT-IR spectrum shows the indicative peaks of suberin. The composition is overall similar to that of Q. suber cork. Q. variabilis cork has the typical cellular characteristics of bark cork tissues with a regular and radially aligned structure of cells without intercellular voids. Solid volume fraction was estimated at approximately 16 %. Compared with Q. suber, the Q. variabilis cork cells are smaller, the cell wall undulation and the overall row alignment less homogeneous, the cell surface is irregular and the solid volume proportion higher. The characteristics of Q. variabilis cork support its use as a cellular material for sealing, insulation and energy absorption, but the overall quality is lower than that of Q. suber cork. The negative impact of the higher density and structural lower uniformity at tissue and cell level should be evaluated for processing and product performance.     

Radial variation of vessel size and distribution in cork oak wood (<Emphasis Type="Italic">Quercus suber</Emphasis> L.)

Quercus suber L. is an important species producing cork whose wood characteristics have not been investigated a lot. Cork oak wood vessels are a striking feature and the most abundant wood tissue largely influencing density and permeability. Vessel size and distribution were studied in approximately 40 year-old and never debarked cork oaks by continuously measuring along the radial direction in the transverse section of wood discs taken at 1.3 m of height using image analysis techniques. The vessel size increases with age from 7660 ± 2286 to 21136 ± 6119 μm², the conductive area from 5.4 ± 2.2 to 11.6 ± 3.9%, and the vessel density remains approximately constant between 5.2 ± 1.5 and 7.3 ± 3.5 vessels/mm². In comparison with ring-porous and some evergreen oaks, cork oaks show a similar conductive area but smaller vessels. Vessel architecture is known to play an important role on oaks tolerance to hydric stress, and these cork oak trees were growing under very harsh edaphoclimatic conditions, not tolerated by other oaks. The well-developed and deep root system allowing access to constant water supply may contribute to the cork oak’s relatively high conductive area.     

Species proportions by area in mixtures of Scots pine (<Emphasis Type="Italic">Pinus sylvestris</Emphasis> L.) and European beech (<Emphasis Type="Italic">Fagus sylvatica</Emphasis> L.)

Scots pine (Pinus sylvestris L.) and European beech (Fagus sylvatica L.) dominate many of the European forest stands. Also, mixtures of European beech and Scots pine more or less occur over all European countries, but have been scarcely investigated. The area occupied by each species is of high relevance, especially for growth evaluation and comparison of different species in mixed and monospecific stands. Thus, we studied different methods to describe species proportions and their definition as proportion by area. 25 triplets consisting of mixed and monospecific stands were established across Europe ranging from Lithuania to Spain in northern to southern direction and from Bulgaria to Belgium in eastern to western direction. On stand level, the conclusive method for estimating the species proportion as a fraction of the stand area relates the observed density (tree number or basal area) to its potential. This stand-level estimation makes use of the potential from comparable neighboring monospecific stands or from maximum density lines derived from other data, e.g. forest inventories or permanent observations plots. At tree level, the fraction of the stand area occupied by a species can be derived from the proportions of their crown projection area or of their leaf area. The estimates of the potentials obtained from neighboring monospecific stands, especially in older stands, were poorer than those from the maximum density line depending on the Martonne aridity index. Therefore, the stand-level method in combination with the Martonne aridity index for potential densities can be highly recommended. The species’ proportions estimated with this method are best approximated by the proportions of the species’ leaf areas. In forest practice, the most commonly applied method is an ocular estimation of the proportions by crown projection area. Even though the proportions of pine were calculated here by measuring crown projection areas in the field, we found this method to underestimate the proportion by 25% compared to the stand-level approach.     

Changes in the phosphorus and nitrogen status and supply in the young spruce stands in the Lužické, the Jizerské and the Orlické Mts. in the Czech Republic during the 2004–2014 period

The contribution shows changes in the phosphorus and nitrogen status in long-term investigated spruce stands in the Lu?ické, the Jizerské and the Orlické Mts. on the border between the Czech Republic and Germany and Poland. During the 11 evaluated years, low phosphorus concentrations were measured, often below the deficiency limit 1.2 mg P/g, and an N/P ratio exceeding the optimal range (6–12), primarily in the second needle-year class. Values of an N/P ratio of between 12 and 18 in the Jizerské Mts. and of between 12 and 27 in the Lu?ické Mts. were discovered. A low phosphorus concentration below the 10 mg·kg^?1 was also detected in the mineral soil horizon. Temporal changes of N/P ratio (increase) and of P concentration (decrease) in the needles are significant for the spruce stands that are in the Orlické Mts. In the Jizerské Mts. and the Lu?ické Mts., there is fluctuation during evaluated period without any clear trend.     

Variation of extractives content in heartwood and sapwood of Eucalyptus globulus trees

The variation in extractives content in sapwood and heartwood was investigated among 12 trees in each of four commercial plantations of Eucalyptus globulus in central Portugal. The study was carried out at the 15% height level and extractions used successively dichloromethane, ethanol and water. At all sites, heartwood had significantly more extractives than sapwood, on average 3.8 and 2.4%, respectively. Most extractives consisted of ethanol soluble material (on average 52% of total extractives). Among the sites, there was a statistically significant difference in the content of extractives but the most important source of variation was the within-tree variation between sapwood and heartwood. Differences in the content of extractives were also observed among trees. A strong relation between extractives content and heartwood proportion was found. The potential loss of pulp yield and problems associated with accumulation of extractives are directly related to the heartwood proportion in the eucalypt stems. Forest management should take into account heartwood development and selection for minimising heartwood extractives.