Effects of steckling weight and planting density on sugar beet (Beta vulgaris L.) monogerm seed yield and qualitative traits

In order to determine the effects of steckling weight and planting density on sugar beet monogerm (Cv. 9597) seed quantitative and qualitative characteristics, this experiment was carried out in Ardabil Agricultural Research Station-Iran (38 degrees 30'N and 48 degrees 30'E) during 2 years (2002-2003). In the study, steckling weight (main-plot) in three levels including 100, 100-200 and 200-300 g and planting density (sub-plot) in three levels including 40, 50 and 60 cm were used in a split-plot experiment based on the RCBD (Randomized Complete Blocks Design) with 5 replications. The measured characteristics were morphological and qualitative (velocity and uniformity of germination) characters, seed size distribution and monogerm seed percentage. According to the results of the experiment, the effect of planting density on the auxiliary branches No. and seed yield was significant at the probability levels of 1 and 5%, respectively. Seed yield increased by 43% as planting density was increased from 65 x 40 to 65 x 60 cm. The increase in steckling weight led to the increase in standard seed portion (with 3.5-4.5 mm in diameter), germinable standard seed yield (11%) and decrease in germination velocity and germination uniformity; and increase in planting density was accompanied by increase in > 4.5 mm seed percentage, velocity and uniformity of germination and decrease in germinable standard seed yield. Eventually, the highest seed yield (1208 kg ha(-1)) was obtained by using steckling weight of 200-300 g and planting density of 65 x 60 cm.     

Isolation of Streptococci from milk samples of normal, acute and subclinical mastitis cows and determination of their antibiotic susceptibility patterns

Streptococci are frequently isolated from bovine mastitis in dairy cows with only limited information available on the antimicrobial susceptibility of these organisms. A total of 42 Streptococci isolated from 148 milk samples of normal, sub acute and acute bovine mastitis cases. Overall, 35% of the strains tested were Streptococcus dysgalactiae, Streptococcus agalactiae 26%, Streptococcus uberis 18 and 4% were Enterococcus sp. Differences between the number of isolations in acute and sub acute groups were statistically significant, (p<0.5). The antimicrobial susceptibility for these organisms was determined for the following antimicrobial agents: cephalexine, penicillin, clindamycin, cloxaciline, gentamicin, streptomycin, amoxicillin, tetracycline, kanamycin, oxytetracycline, ampicillin, chloramphenicol and erythromycin. S. agalactiae, S. dysgalactiae, S. uberis and Enterococci demonstrated high level of resistance against streptomycin, penicillin and cloxaciline. Low level of sensitivity to other tested antimicrobials was demonstrated.     

Quality evaluation of different honey samples produced in Peshawar valley

The present study was designed to evaluate different honey samples obtained from local market for their quality parameters for assessment of their feasibility for foreign export by comparing it with international standards. The study was conducted at PCSIR laboratories complex, Peshawar, during 2006. The tested samples were evaluated for moisture content, Ash percentage, acid content, HMF and reducing sugars percentage. The moisture content of locally produced honey was in the range of 14.5 to 18.23%. The ash content of locally produced honey samples ranged between 0.047-0.35 which is within the standard limits. The acid content of the honey samples ranged between 19.5 and 38.0 meq kg(-1). The HMF contents of locally produced honeys ranged from 5.3 to 23.20 mg kg(-1). The content of reducing sugar of the tested samples ranged between 43.14 and 81.40% for the tested samples of locally produced honey. All of the samples were found to be in acceptable range of international standards for all of the tested parameters except for only one sample with lower reducing sugars. These samples were marked to be according to the international standards and are healthy for human consumption.     

Survival of Paramecium caudatum at various pH values and under normoxic and hypoxic conditions

The objective of this study was to determine the survival of Paramecium caudatum, a protozoan ciliate, with different pH under normoxic and hypoxic conditions. P. caudatum was exposed to 18 treatments (in triplicate) of varying pH (4, 4.7, 5.7, 6.7, 7.7, 8.7, 9.7, 10.7 and 11.7) with two different conditions of normoxic and hypoxic. Survival was examined every second day for three weeks. P. caudatum mortality was 100% immediately when exposed to pH 4, 10.7 and 11.7 either in normoxic or hypoxic conditions, whereas at other pH values tested this ciliate could survive mostly under hypoxic conditions. The results suggest that under hypoxic condition, 4.7-6.7 is the best pH range for survival of this species.     

Sensitive variables controlling salinity and water table in a bio-drainage system

Bio-drainage can be considered as an important part of sustainable irrigation water management. Bio-drainage has potential for managing shallow water conditions in arid and semiarid areas especially when traditional subsurface drains are not available. Bio-drainage theory does not go back too far. The relationship between soil characteristics, water management regimes, and climatic conditions is not yet well defined. This study attempted to use a mathematical model (SAHYSMOD) to evaluate factors affecting design and operation of a bio-drainage system and study its sensitivity to different variables. The study showed that the major constraint of bio-drainage is salt accumulation in tree plantation strips in arid and semiarid regions. Maximum soil water salinity which can be controlled by bio-drainage is around 3 dS m^?1 in rather medium run and sustainability may only be achieved where a salt removal mechanism is considered. The study also showed that the effectiveness of the system is higher where the neighboring strips are narrower. It also showed that bio-drainage is very sensitive to the amount of applied water. While the barrier depth does not have an important effect on water table draw down, it does have a great influence on lowering the salinization rate of tree plantation strips. The application of bio-drainage could be economically controversial since in humid areas water is sufficient for agricultural crops, allocating parts of the expensive land to mostly non-fruit trees may not be feasible, while in arid and semiarid regions there is usually enough cheap land to grow trees.     

Irrigation rate and plant density effects on yield and water use efficiency of drip-irrigated corn

The efficient use of water by modern irrigation systems is becoming increasingly important in arid and semi-arid regions with limited water resources. This study was conducted for 2 years (2005 and 2006) to establish optimal irrigation rates and plant population densities for corn (Zea mays L.) in sandy soils using drip irrigation system. The study aimed at achieving high yield and efficient irrigation water use (IWUE) simultaneously. A field experiment was conducted using a randomized complete block split plot design with three drip irrigation rates (I₁: 1.00, I₂: 0.80, and I₃: 0.60 of the estimated evapotranspiration), and three plant population densities (D₁: 48,000, D₂: 71,000 and D₃: 95,000 plants ha⁻¹) as the main plot and split plot, respectively. Irrigation water applied at I₁, I₂ and I₃ were 5955, 4762 and 3572 m³ ha⁻¹, respectively. A 3-day irrigation interval and three-way cross 310 hybrid corn were used. Results indicated that corn yield, yield components, and IWUE increased with increasing irrigation rates and decreasing plant population densities. Significant interaction effects between irrigation rate and plant population density were detected in both seasons for yield, selected yield components, and IWUE. The highest grain yield, yield components, and IWUE were found for I₁D₁, I₁D₂, or I₂D_1, while the lowest were found for I₃D₂ or I₃D₃. Thus, a high irrigation rate with low or medium plant population densities or a medium irrigation rate with a low plant population density are recommended for drip-irrigated corn in sandy soil. Crop production functions with respect to irrigation rates, determined for grain yield and different yield components, enable the results from this study to be extrapolated to similar agro-climatic conditions.     

Analysis of genomic mutation and immunohistochemistry of platelet‐derived growth factor receptors in canine vascular tumours

We examined whether mutation of the platelet‐derived growth factor receptor protein tyrosine kinase (PDGFR)‐α and PDGFR‐β genes contributes to their overexpression in canine vascular tumours. Genomic sequences of trans‐ or juxtamembrane regions of PDGFR‐α and PDGFR‐β were analysed with immunohistochemical staining and polymerase chain reaction‐direct sequencing using DNA from paraffin‐embedded neoplastic tissues of 27 hemangiosarcomas (HSAs) and 20 hemangiomas (HAs). Immunohistochemically, 75% of the HA cases were positive for PDGFR‐α and almost most of the HA cases were negative for PDGFR‐β. Of the HSA cases, 55.6% were negative for PDGFR‐α and 63% were strongly positive for PDGFR‐β. Among the HA cases, 1 missense mutation was detected in PDGFR‐α exon 18 and 1 in PDGFR‐β exon 17. Two HSA cases had missense mutations in exon 14 and 1 in exon 17 of PDGFR‐β. Thus, genomic mutation of trans‐ or juxtamembrane regions of PDGFRs was not the main mechanism driving the activation of receptors in HSA and HA.     

Blood and tissue concentrations of trimethoprim following its administration alone and in combination with josamycin.

Following a single oral dose of trimethoprim (10 mg/kg b. wt.) in normal fowls, the highest serum concentration achieved 4 hours post-administration with value of 0.64 microgram/ml. The absorption half-life time was 0.64 hours. The elimination half life was 4.73 hours. During repeated oral administration of 10 mg/kg b. wt., once daily for five consecutive days, trimethoprim peaked in serum, 4 h after each dose. Trimethoprim persisted in all fowl's tissues for 96 hours after stopping of drug administration. After oral administration of josamycin (18 mg/kg b. wt.) and trimethoprim (10 mg/kg b. wt.) in normal fowls, a maximum serum concentration of trimethoprim was recorded at 2 hours with half-life of absorption (t0.5(ab)) valued 0.74 hour. The elimination half-life (t0.5 beta) was 4.37 hours. During repeated oral administration of josamycin (18 mg/kg b. wt.) and trimethoprim (10 mg/kg b. wt.) once daily for five consecutive days in normal fowls, the highest plasma concentrations of trimethoprim occurred 2 hours post each dose. The daily maximum plasma concentrations during the repeated oral administration of both tested drugs were nearly constant.