The Value of a Net‐Cage as a Fish Aggregating Device in Southern California

There is an urgent need for primary data that can be used to quantify the value of marine aquaculture facilities that also describe influences on the surrounding natural ecosystem and its wild fish communities. Divers completed 360 transect replicates below a net‐cage and at nearby and distant rocky reefs off Catalina Island, California, estimating the species abundance and size class of all conspicuous fishes in the water column. We observed 10,234 fishes aggregating below the net‐cage with a mean annual density of 142 (SE ± 30) per 100 m² and diversity H′ 2.29. At the adjacent reference reef, we counted 8452 fishes with a mean annual density of 117 (SE ± 20) and H′ 1.45 and at Reference Reef 2, located 500 m away, there were 8958 fishes with a density of 124 (SE ± 20) and H′ 1.13. The total density of fishes was the same between the study sites (ANOVA; P = 0.24); however, the spatial density of fishes in the water column was different between the net‐cage and reference reefs. Additionally, the density of juvenile fish was significantly lower at the net‐cage (ANOVA; P = 0.02), while the density of subadult and adult fishes was higher (ANOVA; P = 0.03). Feeding guild analysis ranked the net‐cage highest (3507), while Reference Reef 1 (2149), and Reference Reef 2 (2241), had lower values, a relationship often found between artificial and natural reefs. This suggests the importance of available trophic resources to the adult population of wild fishes, and has implications in the artificial reef attraction–production debate. The results of this study not only reproduce a pattern of fish attraction to net‐cages in the marine environment reported in previous studies but also demonstrate a relative habitat value compared in both time and space, of the fish community at a net‐cage compared with vibrant kelp bed communities.     

家禽屠体的堆肥

加拿大安达略省家禽生产者对死禽处理通常有以下几种方法:选择经认证的死畜禽处理公司,坑埋,焚烧,堆肥.本文描述了使用堆肥法成功堆肥家禽屠体的一些关键因素. 堆肥是一个狭长的可被生物降解的有机物质堆,有很大的表面积以便氧气良好地渗透.堆肥通过需氧微生物分解生物有机物质制成一个稳定的、类似土壤的物质,称为腐殖质.为了刺激微生物快速降解,有必要给这些生长增殖的微生物提供最理想的环境.     

Morbillivirus infections of seals during the 1988 epidemic in the Bay of Heligoland: III. Transmission studies of cell culture-propagated phocine distemper virus in harbour seals (Phoca vitulina) and a grey seal (Halichoerus grypus): clinical, virological and serological results

Eight harbour seals (Phoca vitulina), two of them seronegative, six seropositive against PDV and a seronegative grey seal (Halichoerus grypus) were exposed to a low doses of a cell culture-propagated phocine distemper virus isolate (PDV 2558/Han 88). An intranasal route of inoculation was chosen. Clinical signs, resembling those of 1988's seal disease and seroconversion were observed in both seronegative harbour seals. One of them succumbed to the infection. The virus was not transmitted to another susceptible harbour seal which served as in-contact animal. Virus could be recovered from leucocytes of the diseased seals. Viremia was also present in a seropositive harbour seal that developed mild clinical signs; other seropositive seals were protected from clinical disease. The grey seal showed seroconversion upon inoculation, but did not develop any signs of disease. The humoral immune response of the seals plainly discriminated between homologous (PDV) and heterologous (canine distemper virus, CDV) virus as shown by virus neutralization tests and an antibody-binding assay (PLA).     

Determination of Young's modulus for spruce, fir and isotropic materials by the resonance flexure method with comparisons to static flexure and other dynamic methods

Summary Dynamic methods provide rapid and accurate means to determine Young's modulus, i.e. the modulus of elasticity, of wood. For dry, clear specimens of épicéa commun (Norway spruce, picea excelsa) and sapin pictiné (silver fir, abies amabilis) we present a comparison of results from tests by a resonance flexure method with results obtained from four-point static flexure tests. For a wide range of specimen size the resonance flexure method provides a simpler, more rapidly performed alternative to the classical static flexure method, giving Young's modulus values which are for the spruce and fir specimens of this study, nearly identical to those calculated from the static flexure tests. Results are also presented which show that a resonance longitudinal method yields higher values of Young's modulus and an ultrasonic method yields still higher values. We provide also a comparison of the four test methods applied to isotropic materials.The authors wish to thank Pierre Michel and André Perrin for preparing the test specimens and components of the test apparatus for this study     

Measuring the productivity and physical workload of brushcutters within the context of a production-based pay system

Forestry occupations are known to be physically demanding, and workers are often paid on a piece rate basis. This pay system is largely used in silvicultural treatments such as plantation and vegetation management. An ill adjusted piece rate system may induce workforce recruitment difficulties or increase accident rates and work related illnesses. A study combining work measurement, ergonomics and economics was undertaken to better understand the factors influencing a worker's workload. Mathematical relations between site factors, worker's production and heart rate variation during work have been examined based on time and motion studies of 38 brushsaw operators performing regeneration release (cleaning) in northern forests. Results show that a piece rate pay system that considers only the area treated without taking into account site factors may lead workers to behave in ways that may compromise their health and safety. The use of a pay system that integrates the influence of site factors on work performance is therefore suggested.     

Characterization of wood-based multi-material systems under dynamic impact stress

ABSTRACT

Due to its naturally grown properties, wood has played a rather subordinate role as a material for technical applications up to now. In this paper, multi-material systems based on veneers of beech (Fagus sylvatica) with different reinforcing variants were investigated. In addition to the influence of different adhesive systems (urea formaldehyde and polyurethane), the effect of reinforcing by aramid fiber fabric and stainless steel foil in different climates was examined. At the center of the investigations were dynamically sudden loads, in the form of impact bending and dart drop tests (penetration and impact mode). It has been shown that the use of the reinforcing materials leads to a significant improvement in material properties. The penetration energy of the composites reinforced with the aramid fiber fabric could be increased by 43%. The maximum force in the dart drop test (impact mode) could be increased by 29% with the stainless steel foil, the damping decreased by 48%. The aramid fiber reinforcement achieved an increase in impact resistance by 27% in impact bending test, the steel reinforced achieved an increase of 39%. A clear dependency on both, the climate and the adhesive within the composite, could be demonstrated.     

Shoot development and dieback in progenies of Nothofagus obliqua

Shoot growth and dieback were compared among progenies of nursery-grown seedlings of Nothofagus obliqua belonging to seven progenies of the same provenance (Quila-Quina, Argentina). First-year shoots consisted of one growth unit (GU) and second-year shoots of one or two GUs. The probability of development of two GU was similar for all progenies. Progenies were different in terms of shoot size, terminal bud abscission, the extent of shoot dieback after shoot extension and the node of origin of the relay shoot on the first shoot. Plants with a second-year shoot consisting of two GUs had a thicker stem and more nodes than those with single-GU shoots. The selection of N. obliqua seed trees based on architectural traits suitable for forestry development at specific sites must contemplate variability among progenies and their probabilities of successful development under different conditions.     

Three-dimensional imaging of a sawn surface: a comparison of confocal microscopy,scanning electron microscopy,and light microscopy combined with serial sectioning

The three-dimensional structure of a transverse sawn wood surface was investigated using several methods, to compare techniques, and to study the types of deformation in tracheids at the saw cut. A sample of spruce sapwood was cut with a fret saw across the grain. The transverse sawn surface was imaged by confocal microscopy, field emission scanning electron microscopy (FESEM), and by light microscopy combined with serial sectioning and three-dimensional (3D) reconstruction. Both confocal microscopy and FESEM were restricted to visualising the cut surface of the wood. However, serial sectioning was able to reveal the internal structure below the cut surface providing more information on the types of cell deformation present. The wood structure was deformed to depths of more than 600 μm below the surface with twisting, crushing and tearing deformations. Near the outer surface, gaps were formed between groups of tracheids where the cell walls had been torn away to form saw dust. The deformation tended to form groups of tracheids that were twisted relative to each other. Latewood was less distorted, forming a dense solid surface compared to the highly fibrous earlywood.     

Phenology Differs among Norway Spruce Populations in Relation to Local Variation in Altitude of Maternal Stands in the Beskidy Mountains

An investigation of phenological and growth traits was conducted in a lowland plantation, comprised of 23 Norway spruce (Picea abies (L.) Karst.) seed stands from the Istebna region in the Beskidy Mountains of Poland. Significant differences were found among population in growth initiation, growth termination and the length of shoot elongation period. The two latter traits were highly correlated and were attributed to the altitude of the maternal stand. The tested populations were grouped based on phenology. Progeny of lower-alttitude stands ceased growth later, had a longer duration of shoot growth and greater current leader length compared to progeny of higher-altitude stands. Individual populations, however, did not differ in current-year growth and total tree height, implying higher within-population variation in growth traits than in phenology. The similar growth capacity of all tested populations suggests considerable gene flow between maternal stands, although differences in phenology imply the adaptation of progenies to the altitudinal environment of seed origin. These results suggest that within tested populations, selection is possible based on phenology alone, without considerable reduction of early height growth; final decisions, however, should be based on the environmental conditions of the planting site.     

Tree density and site quality influence on Pinus halepensis Mill. reproductive characteristics after large fires

In Spain, many Pinus halepensis Mill. forests have been seriously affected by significant forest fires in the past decade, in 1994 alone, more than 100 000 ha were burned in Eastern Spain. In order to study the reproductive characteristics of P. halepensis after forest fires, six locations were selected in four areas affected by serious fires in the summer of 1994, and the following different precipitation zones were studied: dry-subhumid, dry and semi-arid. Ten years after the fires, data relevant to the production of pine cones: serotinous (grey), mature (brown), immature (green) and opened cones, was collected from areas with natural post-fire regeneration. Various cone and seed characteristics, such as pine cone seed number and weight, and germination percentage, were measured. The results showed greater production of cones and strobili in high-density sites. The biggest cone sizes (volume) and seed number per cone were related to site quality (dry-subhumid precipitation zone). Also, viability and germination percentages were higher with better site quality, with significant differences in values for serotinous and non-serotinous cones. Despite these differences, the canopy seed bank was large enough to ensure regeneration in this area for this age stand.