Arsenic-prone rice cultivars: a study in endemic region

Rice is prone to arsenic accumulation compared to other cereals as typically grown up under waterlogged situation favoring arsenic mobility. Arsenic in rice depends on arsenic availability to plants from irrigation water, even differs among cultivars and their plant parts. Present study was concentrated on arsenic accumulation in various plant parts of five common rice cultivars grown using irrigation water from different water sources in various fields in arsenic-endemic region. Additionally, dose response experiment under laboratory net house was conducted on the same cultivars excluding open environmental factors. The common cultivars were categorized according to high to low arsenic accumulator in rice grain, straw and root parts. The cultivar Shatabdi has shown highest arsenic accumulation in rice grain compared to other rice cultivars in fields and when grown at various soil arsenic doses. In field samples, a highest grain arsenic concentration ranged between 0.69 ± 0.04 and 0.78 ± 0.12 mg kg^?1 for Shatabdi, whereas lowest grain arsenic concentration ranged between 0.37 ± 0.07 and 0.41 ± 0.07 mg kg^?1 for the cultivars GB3 and Lalat. Speciation study detected more inorganic arsenic than organoarsenicals with a trend of arsenite > arsenate > DMA > MMA, which would be problem for consumers. The concluding remark is the characterization of common rice cultivars according to arsenic concentration to highlight an important remediation strand by changing to low arsenic cultivar.     

Scaling analysis of soil water storage with missing measurements using the second‐generation continuous wavelet transform

Information on the spatial variability of soil water storage (SWS) at different scales is important for understanding various hydrological, ecological and biogeochemical processes in the landscape. However, various obstructions such as roads or water bodies may result in missing measurements and create an irregular spatial series. The wavelet transform can quantify spatial variability at different scales and locations but is restricted to regular measurements. The objective of this study was to analyse the spatial variability of SWS with missing measurements using the second‐generation continuous wavelet transform (SGCWT). Soil water content (converted to SWS by multiplying with depth) was measured with a neutron probe and time‐domain reflectrometry along a transect of 128 points. Because there were missing measurements, I used SGCWT to partition the total variation into different scales and locations. Whilst there were some small‐scale variations (< 20 m) along the transect, the medium scale variations (20–70 m with an average of about 30–45 m) were mainly concentrated within the depressions along the transect. The strongest variations were observed at around 90–110 m scale, representing the variations resulting from alternating knolls and depressions. Similar spatial patterns at different scales were observed during different seasons, indicating temporal stability in the spatial pattern of SWS. Among the controlling factors, the wavelet spectra of relative elevation (RE) and organic carbon (OC) were very similar to that of SWS. The wavelet covariance was also large between SWS and RE and OC at all seasons. As the OC reflects the long‐term history of water availability and might be controlled by topographic setting or elevation, it can be concluded that elevation is an important controlling factor of SWS irrespective of seasons in this type of landscape. The SGCWT provides a new way of analysing the spatial variability of regularly measured soil properties or those with missing measurements.     

Genetic Variance Estimates in Heterogeneous Potato Populations Propagated from True Potato Seed(TPS)

Twenty nine cross populations developed according to line x tester mating design along with their twelve parents raised from true potato seeds, were used to study variability and correlation for seven characters. The range of variation for all the characters were found to be wide and pronounced which indicated that characters were quantitative in nature and were under polygenic control. For all the characters, greater portion of the total δ^2p was mostly contributed by the δ^2g. Among the seven characters, tuber weight per plant showed the highest δ^2g, PCV, GCV, H2b, GA and expected GA%.On the other hand, dry matter contents (%) showed the lowest H^2b. Phenotypic and genotypic correlation coefficients of plant height with no. of tubers per plant and tuber weight per plant; no. of branches per plant with no. of tubers per plant and tuber weight per plant were found to be significant and positive.     

Selection of Suitable Parents in the Development of Potato Hybrids in Bangladesh

Potatoes(Solanum tuberosum L)are the thirdlargest food crop in Bangladesh following rice andwheat and make a major contribution to the total foodsupply of the country.Although in many westerncountries potato is the number one staple food,it is al-most entirely used as a vegetable in Bangladesh.Thepotato is a short duration crop that produces a largeamount of calories in a short period of time[1].Thepotato produces more protein and calories per unitarea per unit time than any other major food…     

Prospects and challenges in utilization of indigenous rocks and minerals as source of potassium in farming

Potassium (K) is one of the essential nutrients required by crops in large quantities; however, its use in agriculture by farmers is less than required in developing countries. This neglect has led to excess mining of K in soils by crop plants and has resulted in a negative balance of K in soils. This loss necessitates the need of more use of potassium fertilizers in agriculture. Rocks and minerals offer a potential fertilizer to utilize in agriculture as source of K. The crop trials revealed that feldspar, mica, glauconite, nepheline and shoenite are good sources of K for crops, especially in highly weathered acid soils. However, some researchers have reported no agronomic benefit of feldspar or granite rock application to crops. Overall the size modification, acidulation, microbial inoculants and preparation of K-enriched compost are the effective techniques to utilize K-bearing rocks and minerals. Very limited information is available on these aspects. Thus, in this review, an attempt has been to consolidate up-to-date information of indigenous rocks and minerals as possibilities for alternate sources of K for crop plants. Moreover, this area of research needs attention to utilize indigenous K sources, which can aid to limit the import and cost, of the establishment of potash fertilizer-based industries in developing countries.     

Physical and mechanical properties of jute, bamboo and coir natural fiber

A systematic study has been carried out to investigate the mechanical and physical properties of jute, bamboo and coir (brown and white) single fibers. The tensile properties (tensile strength, Young’s modulus and strain to failure) were determined by varying span length. Scanning electron microscopic analysis was also carried out to determine the physical properties of fibers in order to correlate with its strength, Young’s modulus and strain to failure. The Young’s modulus and strain to failure were corrected using newly developed equations. The study revealed that with increasing test span length the Young’s modulus increased and tensile strength as well as strain to failure decreased. This is because no extensometer could be used in this test set-up and machine displacement (denoted by α) was used for the modulus determination. It is also attributed that larger span length helps to minimize the machine displacement compared to smaller ones due to the reduced relative effect of slippage in the clamps. Among all fibers, the Young’s modulus of bamboo fiber was the highest. Jute fiber had smoother surface compared to other three examined fibers.     

Evaluation of cotton byproducts as fillers for poly(lactic acid) and low density polyethylene

Polymeric composites based on cotton burr and cottonseed bull have been prepared by melt blending and extrusion. For poly(lactic acid) (PLA) and low-density polyethylene (LDPE), addition of the fillers slightly changed the composite's thermal properties but significantly decreased the composite's mechanical properties. Heat treatment prior to extrusion resulted in composites with better tensile strength and Young's modulus. The use of maleic anhydride and peroxide only slightly improved the physical properties of the LDPE materials, but the effect was less clear for the PLA materials. The PLA-filler composites may be useful for lowering the cost of the materials in applications that can tolerate the decreased properties. In addition, the addition of fillers to LDPE might be beneficial in applications to improve stiffness or to improve biodegradability.     

Total Phenolics and Antioxidant Activity of Water and Ethanolic Extracts from Distillers Dried Grains with Solubles With or Without Microwave Irradiation

The purpose of this study was to determine the efficacy of extracting phenolic compounds with antioxidant activity from distillers' dried grains with solubles (DDGS) with water, 50% aqueous ethanol, and absolute ethanol, using microwave irradiation or a water bath at various temperatures. DDGS was extracted for 15 min with each solvent while heating at 23, 50, 100, and 150°C by microwave irradiation or in a water bath at 23, 50, and 100°C. Phenolic content of extracts increased with increasing temperature to a maximum of 12.02 mg/g in DDGS extracts that were microwave irradiated in water or with 50% aqueous ethanol at 150°C. Antioxidant activity range was 1.49–6.53 μmol of Trolox equivalents/g of DDGS. Highest antioxidant activities were obtained from 50% aqueous ethanol extracts at all temperatures, and water extracts that were heated at 100 and 150°C. These data indicate that DDGS extracts with high phenolic content and antioxidant activity can be obtained from DDGS, particularly with the use of water or 50% ethanol and high temperature (100 or 150°C). This may be valuable to ethanol manufacturers, livestock producers, and food and nutraceutical companies.     

In planta detection of Macrophomina phaseolina from jute (Corchorus olitorius) by a sodium acetate-based direct PCR method

Macrophomina phaseolina (Tassi) Goid. is the most important pathogen of jute and primarily causes seedling blight, leaf spot and stem rot. The pathogen was detected from field samples by a simple method of direct PCR (dPCR) which obviates the steps of DNA extraction. The leaf bits were treated with a lysis buffer at 65°C for 25 min, whereas the stem pieces were initially incubated at 65°C for 5 min followed by incubation at 60°C for 25 min and the lysate was used as PCR template. Based on the type of tissue, the composition and concentration of lysis buffer systems were optimized. For leaf samples the optimized buffer system composed of 20 mmol l ^-1 tris (hydroxymethyl aminomethane (Tris)-Cl (pH 8.0), 1.5 mmol l ^-1 ethylene diamine tetra acetate (EDTA) (pH 8.0), 1.4 mol l ^-1 sodium acetate and 200 μg/ml proteinase K. Further, 3% PVP (w/v) and β-mercaptoethanol (1% w/v) were added into the buffer. In case of stem samples, PVP was not applied and higher concentrations were used for other components. M. phaseolina could be detected from both leaf and stem samples generating amplicon of 350 bp. This is the first report of detecting M. phaseolina by a direct PCR method without DNA extraction.