The impact of shade on morphology,growth and biomass allocation in <Emphasis Type="Italic">Picea sitchensis</Emphasis>, <Emphasis Type="Italic">Larix</Emphasis> × <Emphasis Type="Italic">eurolepis</Emphasis> and <Emphasis Type="Italic">Thuja plicata</Emphasis>

To determine the effect of shade on morphology, growth and biomass allocation in Picea sitchensis, Larix × eurolepis and Thuja plicata, seedlings were grown in the open or under shadehouses providing 25%, 50% and 75% reductions of full-light for two growing seasons. For most of the characteristics assessed there was no significant interaction between species and shade indicating that the morphological responses to changing shade treatments were not species-dependent. After two growing seasons the mean height increment for the three species was significantly greater in 25% (76.1 cm) and 50% shade (74.9 cm) than in the open (69.5 cm). Root collar diameter increment, shoot, root and total biomass declined significantly with increasing shade while the opposite was true for the height:diameter ratio. In both western red cedar and hybrid larch the shoot:root ratio was significantly greater in the shade while in Sitka spruce this characteristic was not influenced by shade. While all species had significantly greater specific shoot areas in 75% shade than in 0% shade, this trend was particularly pronounced in hybrid larch. In hybrid larch and western red cedar, the normalised specific projected shoot area increased significantly with increasing shade. The opposite trend was observed for Sitka spruce. We conclude that in the main the species studied demonstrated similar shade acclimation responses despite their reported differences in shade tolerance.     

Interactions between soil scarification and Norway spruce seedling types

Interactions between scarification treatments and seedling types of Norway spruce were examined at two different locations in southern Sweden. The scarification treatments were not scarified control, mounding and soil inversion and the seedling types were a 10 week-old containerized seedling (mini seedling), a 2 year-old containerized seedling and a 2 year-old hybrid seedling, grown as a containerized seedling the first year and as a bare-root seedling the second year. Site preparation intensity had a greater effect on the mini seedlings. The results indicated that mini seedlings established faster in the soil inversion treatment compared to the larger seedling types. At the same seedling age, the mini seedlings had faster or similar growth rate as the containerized and the hybrid seedlings regardless of scarification treatment. Although mini seedlings grew as well as or even better than larger seedlings if they were successfully established, they were more sensitive to their planting environment and proper handling was critical. Problems with frost heaving and competing vegetation have to be taken into consideration when choosing site preparation method and seedling type.     

First-year growth response of cold-stored,nursery-grown aspen planting stock

This research examined the first year growth characteristics of cold stored and transplanted nursery-produced aspen (Populus tremuloides) seedlings (container and bareroot (BR)) and compared it to the growth of seedlings that had not been transplanted (established from germinants in the field) and therefore had an unrestricted root system (UR). Prior to planting, nursery-produced seedlings were placed in cold storage (−3°C) and root growth potential (RGP) and total non-structural carbohydrate (TNC) root reserves were tested at 0, 10, 75 and after 150 (container) and 190 days (BR) of storage. Both container and BR stock had much lower root to shoot ratios (RSRs) and root carbohydrate reserves compared to UR seedlings after 170 days. During storage, root reserves in container stock declined faster than in the BR and UR seedlings. RGP in all nursery stock was the highest after 75 days of storage, while longer storage resulted in shoot dieback and reduced root growth. After the first growing season, UR seedlings were one tenth the size of the nursery stock; however, in the second growing season they had no stem dieback and grew twice the height and stem diameter. The higher RSRs and root reserves in the UR seedlings was likely caused by early bud set in its first year of growth. This suggests that inducing bud set earlier in the growing regime might allow seedlings to increase root mass and carbohydrate reserves.     

Comparing the model forms estimating generalised diameter-height relationships in Tecomella undulata plantations in hot arid region of India

Four generalised diameter-height equations were developed and compared for pure and even-aged stands of Tecomella undulata in hot arid region of Rajasthan State in India. The data used to fit the equations consisted of 1 540 diameter-height observations collected from the plots laid out in uniformly stocked stands of varying age and density. The performance of four equations was tested by non-linear least squares regression and evaluated using different statistical criteria. Finally, these equations, with the same values of coefficients ob- tained during the fitting phase, were validated by an independent data set consisting of 854 diameter-height observations. Overall, equation （4） （Hui and Gadow function） was found to perform best for both the fitting data set as well as validation data set.     

Radial variation of vessel size and distribution in cork oak wood (<Emphasis Type="Italic">Quercus suber</Emphasis> L.)

Quercus suber L. is an important species producing cork whose wood characteristics have not been investigated a lot. Cork oak wood vessels are a striking feature and the most abundant wood tissue largely influencing density and permeability. Vessel size and distribution were studied in approximately 40 year-old and never debarked cork oaks by continuously measuring along the radial direction in the transverse section of wood discs taken at 1.3 m of height using image analysis techniques. The vessel size increases with age from 7660 ± 2286 to 21136 ± 6119 μm², the conductive area from 5.4 ± 2.2 to 11.6 ± 3.9%, and the vessel density remains approximately constant between 5.2 ± 1.5 and 7.3 ± 3.5 vessels/mm². In comparison with ring-porous and some evergreen oaks, cork oaks show a similar conductive area but smaller vessels. Vessel architecture is known to play an important role on oaks tolerance to hydric stress, and these cork oak trees were growing under very harsh edaphoclimatic conditions, not tolerated by other oaks. The well-developed and deep root system allowing access to constant water supply may contribute to the cork oak’s relatively high conductive area.     

日本北海道北部寒温带森林流域林冠层凋落物及其养分归还量的景观格局(英文)

Within a forested watershed at the Uryu Experimental Forest of Hokkaido University in northern Hokkaido, overstory litterfall and related nutrient fluxes were measured at different landscape zones over two years. The wetland zone covered with Picea glehnii pure stand. The riparian zone was deciduous broad-leaved stand dominated by Alnus hirsuta and Salix spp., while the mixture of deciduous broadleaf and evergreen conifer dominated by Betula platyphylla, Quercus crispula and Abies sachalinensis distributed on the upland zone. Annual litterfall averaged 1444, 5122, and 4123 kg.hm^-2·a^-1 in the wetland, riparian and upland zones, respectively. Litterfall production peaked in September-October, and foliage litter contributed the greatest amount （73.4%-87.6 %） of the annual total litterfall. Concentrations of nutrients analyzed in foliage litter of the dominant species showed a similar seasonal variation over the year except for N in P glehnii and A. hirsuta. The nutrient fluxes for all elements analyzed were greatest on riparian zone and lowest in wetland zone. Nutrient fluxes via litterfall followed the decreasing sequence： N （11-129 kg.hm-2.aq） 〉 Ca （9-69） 〉 K （5-20） 〉 Mg （3-15） 〉 P （0.4-4.7） for all stands. Significant differences were found in litterfall production and nutrient fluxes among the different landscape components. There existed significant differences in soil chemistry between the different landscape zones. The consistently low soil C：N ratios at the riparian zone might be due to the higher-quality litter inputs （largely N-fixing alder）.     

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Although wood/cellulose-plastic composites (WPC) of low wood/cellulose content have been more accepted worldwide and are promoted as low-maintenance, high-durability building products, composites containing high wood/cellulose content are not yet developed on an industrial scale. In this study, flow properties, mechanical properties, and water absorption properties of the compounds of cellulose microfiber/polypropylene (PP) and maleic anhydride-grafted polypropylene (MAPP) were investigated to understand effects of the high cellulose content and the dimensions of the cellulose microfiber. The molding processes studied included compression, injection, and extrusion. It was found that fluidity is not only dependent on resin content but also on the dimension of the filler; fluidity of the compound declined with increased fiber length with the same resin content. Dispersion of the composite was monitored by charge-coupled device (CCD) microscope. Increasing the plastic content in the cellulose-plastic formulation improved the strength of mold in addition to the bond development between resin and filler, and the tangle of fibers. The processing mode affected the physicomechanical properties of the cellulosic plastic. Compression-molded samples exhibited the lowest modulus of rupture (MOR) and modulus of elasticity (MOE) and the highest water absorption, while samples that were injection-molded exhibited the highest MOR (70 MPa) and MOE (7 GPa) and low water absorption (2%).     

Canopy recruitment in the beech (<Emphasis Type="Italic">Fagus engleriana</Emphasis>) forest of Mt. Shennongjia,Central China

A dendrochronological technique was used to investigate canopy recruitment of beech (Fagus engleriana Seem.) trees in western Hubei Province of Central China by identifying growth releases through gap formation. The results indicated that 83% and 17% of the canopy trees regenerate in gaps and the understory, respectively. Radial growth analyses demonstrated that there are three modes for beech regeneration and canopy recruitment: (1) gap origin without suppression; (2) gap origin with period(s) of suppression; and (3) understory origin. Multiple periods of release and suppression imply that beech regeneration and canopy recruitment are very sensitive to gap formation.     

Transverse shrinkage in G-fibers as a function of cell wall layering and growth strain

Transverse drying shrinkage was measured at microscopic and mesoscopic levels in poplar wood characterised by an increasing growth strain (GS), from normal to tension wood. Results show that: (a) the drying shrinkage, measured as a relative thickness decrease, was significantly higher for G-layer (GL) than for the other layers (OL), GL shrinkage was not significantly correlated with GS, and OL shrinkage was negatively correlated with GS. (b) In gelatinous fibre (G-fibre), lumen size increased during drying and this increase was positively related with GS, but in normal wood fibre, lumen size decreased during drying. These findings suggest that GL shrank outwards (i.e., its internal perimeter increases), so that its shrinkage weakly affected the total cell shrinkage and the mesoscopic shrinkage was controlled by the OL shrinkage which shrank inwards (i.e., its external perimeter decreases). (c) Measurements done on 7 × 7 mm2 thin sections evidenced a negative correlation between transverse shrinkage and GS, significant in T direction but weak in R direction. These observations at both levels allow to discuss the contribution of GL to the mesoscopic shrinkage of tension wood.     

Crystalline structure of heat-treated Scots pine [<Emphasis Type="Italic">Pinus sylvestris</Emphasis> L.] and Uludağ fir [<Emphasis Type="Italic">Abies nordmanniana</Emphasis> (Stev.) subsp. <Emphasis Type="Italic">bornmuelleriana</Emphasis> (Mattf.)] wood

The aim of this study was to determine changes in crystallinity and crystalline unit cell type of heat-treated Scots pine (Pinus sylvestris L.) and Uludağ fir (Abies nordmanniana stev. subsp. bornmuelleriana Mattf.) wood samples by means of FT-IR spectroscopic method. Heat treatment was applied on the test samples in an oven at three different temperatures (120, 150, and 180°C) and for two different periods of time (6 and 10 h) under atmospheric pressure. It was designated that crystallinity of both Scots pine and Uludağ fir wood samples increased during heat treatment depending on the duration. However, monoclinic structure in crystalline unit cells of Scots pine and Uludağ fir wood samples converted to triclinic structure when heat treated. It was estimated that monoclinic structure was dominant in the crystalline unit cell. It was established that the crystalline structure of Scots pine wood samples was more affected by heat treatment than that of Uludağ fir wood samples.