利用短波红外高光谱成像技术检测洋葱酸皮病(Burkholderia cepacia)

酸皮病是一种重要的洋葱采后病害,对洋葱的采后生产造成了巨大的经济损失。本研究利用短波红外高光谱成像系统对洋葱采后酸皮病进行检测,分别从健康的和已感染酸皮病的洋葱上采集高光谱反射图像(950~1 650 nm),通过对两种洋葱的光谱进行主成分分析的结果表明,洋葱的颈部区域在1 070、1 400 nm波长下对酸皮病的发生最具指示性。采用两种最佳波长下获得的对数比率图像对两种不同的图像进行分析研究。第一种分析方法是利用全局阈值(0.45)将感染酸皮病的图像区域从对数比率图像中分离出来,通过对分离图像区域的象元素进行Fisher判别分析,可辨别出80%感染酸皮病的洋葱。第二种分析方法是从对数比率图像上获得三个参数(最大值、对比度及匀质性),再将这三个参数作为输入特征向量导入到支持向量机(Gaussian kernel,γ=1.5)中,利用这种方法,可辨别出87.14%感染酸皮病的洋葱。应用本研究结果可进一步开发出一种多光谱成像系统,用于洋葱包装流水线上酸皮病的检测。     

Irrigation scheduling of plastic greenhouse vegetable crops based on historical weather data

Irrigation scheduling based on the daily historical crop evapotranspiration (ET_h) data was theoretically and experimentally assessed for the major soil-grown greenhouse horticultural crops on the Almería coast in order to improve irrigation efficiency. Overall, the simulated seasonal ET_h values for different crop cycles from 41 greenhouses were not significantly different from the corresponding values of real-time crop evapotranspiration (ET_c). Additionally, for the main greenhouse crops on the Almería coast, the simulated values of the maximum cumulative soil water deficit in each of the 15 consecutive growth cycles (1988–2002) were determined using simple soil-water balances comparing daily ET_h and ET_c values to schedule irrigation. In most cases, no soil-water deficits affecting greenhouse crop productivity were detected, but the few cases found led us to also assess experimentally the use of ET_h for irrigation scheduling of greenhouse horticultural crops. The response of five greenhouse crops to water applications scheduled with daily estimates of ET_h and ET_c was evaluated in a typical enarenado soil. In tomato, fruit yield did not differ statistically between irrigation treatments, but the spring green bean irrigated using the ET_h data presented lower yield than that irrigated using the ET_c data. In the remaining experiments, the irrigation-management method based on ET_h data was modified to consider the standard deviation of the inter-annual greenhouse reference ET. No differences between irrigation treatments were found for productivity of pepper, zucchini and melon crops.     

汽车零部件的对数正态模糊可靠度设计

从强度安全性的角度出发,综合运用了概率密度函数联合积分法与功能密度函数积分法,整理并推导了汽车零部件的对数正态模糊可靠度计算公式,即应力、强度都为对数正态分布,隶属度函数为k次抛物线分布时的模糊可靠度计算公式;通过VB编程实现数值解的计算,根据输入的原始数据、原函数与积分区间的特点进行积分变换,然后利用中点公式积分法与龙贝格求积法进行积分计算。本程序可直接应用于设计计算中,以提高汽车零部件的设计水平。     

A QTL controlling low temperature induced spikelet sterility at booting stage in rice

Low temperature is a major abiotic stress for rice cultivation, causing serious yield loss in many countries. To identify QTL controlling low temperature induced spikelet sterility in rice, the progeny of F2, BC1F1 and BC2F1 populations derived from a Reiziq × Lijiangheigu cross were exposed to 21/15°C for 15 days at the booting stage, and spikelet sterility was assessed. For genotyping, 92 polymorphic markers from 373 SSR and 325 STS primer pairs were used. A major QTL was initially indentified on the short arm of chromosome 10 by selective genotyping using highly tolerant and susceptible progeny from F2 and BC1F1 populations. The QTL (qLTSPKST10.1) was validated and mapped by genotyping the entire F2 (282 progeny) and BC1F1 (84 progeny) populations. The results from the F2 population showed that qLTSPKST10.1 could explain 20.5% of the variation in spikelet sterility caused by low temperature treatment with additive (a = 14.4) and dominant effect (d = −7.5). From the analysis of 98 selected BC2F1 progeny, the QTL located in the 3.5 cM interval between S10010.9 and S10014.4 was further confirmed. Based on the studies of 3 generations in 2 years, it was clear that the QTL on chromosome 10 is a major determinant of the control of low temperature induced spikelet sterility at booting stage.     

猪MAPK12基因cDNA的克隆及序列分析

目的 克隆新的猪MAPK12基因全长ORF，分析其生物特性，为进一步研究该酶的功能提供信息资料。方法：以已报道的人及小鼠MAPK12基因cDNA序列为依据，利用电脑克隆策略获得的ESTs设计引物，RT-PCR技术扩增新的猪MAPK12基因ORF序列，将PCR产物直接进行序列测定。分析此蛋白的特性并预测其结构。结果 分离的ORF全长1101bp，编码367个氨基酸，与人鼠氨基酸序列92%同源；利用生物信息学软件分析出此蛋白的理化特性并预测了其一级、二级和高级结构。结论 研究分离的基因片段可命名为猪ERK6，通过分析，获取了该酶的基本信息特征，并与现有的报道结果进行对比分析，为进一步开展猪MAPK12基因的结构功能、表达调控的相关研究奠定了基础。     

Inheritance of Aluminum Tolerance and its Effects on Grain Yield and Grain Quality in Oats (Avena Sativa L.)

Summary Aluminum toxicity due to the cation Al⁺³ is a major factor limiting yields in acid soils. Wide genetic variability to aluminum tolerance is found in oat genotypes. The objectives of this study were to determine the number of genes controlling aluminum tolerance in oats and to verify if any detrimental effects were present of the aluminum tolerance genes on grain yield and grain quality in Al⁺³free soils. Aluminum tolerance was estimated as the average regrowth of the main root after exposure to toxic levels of Al⁺³ in a hydroponic solution under controlled conditions. The number of genes controlling that trait was estimated from the distribution of the average root regrowth frequencies in a population of 333 recombinant inbred lines (RIL's) in generations F_5:6 and F_5:7. The effects on grain yield and grain quality were assessed in a subpopulation of 162 RIL's chosen based on their aluminum tolerance response. Aluminum tolerance in the evaluated population was controlled by one dominant major gene with the tolerant genotypes carying Al _a Al _a and the sensitive ones al _a al _a alleles. No detrimental effects of the Al _a allele on grain yield or grain quality were detected.Part of the Master of Science dissertation of the first author     

A practical and reliable procedure for in vitro induction of tetraploid tomato

A relatively rapid, practical and reliable procedure for in vitro production of tetraploid tomato using colchicine is described. Using this procedure 11.11% generation of tetraploids was obtained after exposure of seedling shoot meristem explants with 8 mM colchicine for 96 h. Confirmation of tetraploid production (2n = 48), was determined by flow cytometry and verified by cytogenetic analysis of root tip preparations. The results indicate that the procedure is adequate for induction and screening of tetraploid tomato plantlets.     

Response of gladiolus (Gladiolus spp) plants after exposure corms to chitosan and hot water treatments

The state of Morelos, Mexico has gradually become an important producer of gladiolus. Some preconditioning treatments of corms are empirically done causing uneven emergence and low quality of flowers. In this investigation, before planting, gladiolus corms var. ‘Blanca Borrego’ were dipped in chitosan (chitosan reagent and commercial chitosan Biorend^®), in hot water at various temperatures and in treatments combined with Biorend^® at 1.5% and hot water. Results indicated that the most influenced variables were corm germination, number of flowers per spike, number of cormlets and vase life. Overall, the commercial product Biorend^® at 1.5% accelerated corm emergence in approximately 4 days, the number of flowers increased by 2–7 and the vase life extended for 3 days. The number of cormlets was also duplicated. Corms dipped in the commercial chitosan Biorend^® at 1.5% at different intervals of time were not greatly affected except for the emergence and number of cormlets. However, for this experiment there were significant effects on the number of leaves and flowers because of the interactions between chitosan and the immersion time. The temperature of 55 °C affected plant development because emergence was delayed by 6 days; and there were less number of leaves, flowers and cormlets. On the other hand, the incidence of Fusarium oxysporum in naturally infected corms was 0% at temperatures of 55 °C and 50 °C. Immersion times (0, 10, 15 and 20 min) in hot water at 50 °C did not show significant effects on plant development and vase life. Corms dipped in Biorend^® at 1.5% and hot water at 50 °C accelerated their emergence for about 1–7 days, the number of flowers increased by two, extended the storage life for 1–3 days and increased the number of cormlets. The integration of these two treatments -Biorend^® and hot water- might be a good option for increasing the gladiolus plant quality and vase life.     

Estimation of actual evapotranspiration for a drip-irrigated Merlot vineyard using a three-source model

A study was performed in order to evaluate the three-source model (Clumped model) for direct estimation of actual evapotranspiration (ET_a) and latent heat flux (LE) over a drip-irrigated Merlot vineyard trained on a vertical shoot positioned system (VSP) under semi-arid conditions. The vineyard, with an average fractional cover of 30%, is located in the Talca Valley, Region del Maule, Chile. The performance of the Clumped model was evaluated using an eddy covariance system during the 2006/2007 and 2007/2008 growing seasons. Results indicate that the Clumped model was able to predict ET_a with a root mean square error (RMSE), mean bias error (MBE), and model efficiency (EF) of 0.33, −0.15 mm day⁻¹ and 74%, respectively. Also, the Clumped model simulated the daytime variation of LE with a RMSE of 36 W m⁻², MBE of −8 W m⁻², and EF of 83%. Major disagreement (underestimated values) between observed and estimated values of ET_a was found for clear days after rainfall or foggy days, but underestimated values were less than 10% of the data analysis. The results obtained in this study indicate that the Clumped model could be used to directly estimate vine water requirements for a drip-irrigated vineyard trained on a VSP. However, application of the Clumped model requires a good characterization of the drip-irrigated vineyard architecture.     

The harvest of the freshwater crayfish <Emphasis Type="Italic">Astacus leptodactylus</Emphasis> Eschscholtz in Turkey: harvest history,impact of crayfish plague,and present distribution of harvested populations

This review focuses on the present distribution of populations of the crayfish Astacus leptodactylus that are harvested in Turkey. It also examines the history of this harvest and the impact that crayfish plague has had on them. Crayfish plague, caused by the fungus-like organism, Aphanomyces astaci Schikora, 1906, is a severe parasite of freshwater crayfish and has caused a lot of damage to A. leptodactylus populations in Turkey since 1984. Turkey was the largest provider of A. leptodactylus to Western Europe from 1970 (or possibly earlier) until 1986. For example, the peak production was reached in the early 1980s, with over 5,000 tonnes being exported in 1984. On the other hand, as a result of the crayfish plague the harvest of A. leptodactylus was reduced severely in most populations in Turkey after 1985. The harvest was only 320 tonnes in 1991. After the occurrence of crayfish plague in Turkey, in order to increase crayfish production uncontrolled A. leptodactylus stockings have been carried out in many waterbodies throughout Turkey. These introductions have caused an increase in the number of A. leptodactylus populations, but exploitation of A. leptodactylus is still under the pressure of the plague, although there has been a steady increase in crayfish production in recent years. The harvest increased to 2,317 tonnes in 2004. Fortunately, among those populations affected by crayfish plague, large amounts of A. leptodactylus can still be harvested from three lakes, ?znik (Bursa), E?irdir (Isparta) and Çivril (Denizli). Thus, it seems that A. leptodactylus has a degree of resistance to crayfish plague. It is therefore interesting to investigate the resistance of A. leptodactylus caught from these populations to crayfish plague.