Effect of tool angles on the chips generated during milling of wood by straight router-bits

 The effect of tool angles on the shapes of chips generated by parallel-to-grain and end-grain milling was explored for China fir and maple under fixed spindle and feed speeds and cutting depth. The milling path was up-milling by straight router-bits with a diameter of 12 mm. The chip shapes could be distinguished as five types: spiral, splinter, flow, thin, and granules or powder. The flow and thin chips were generated most often (on a weight percentage basis) for all tool angles investigated for parallel-to-grain and end-grain milling of China fir and maple. More granule chips were produced with parallel-to-grain milling than with end-grain milling for both woods. The measured chip thickness (t′) was thicker than the calculated thickness (t _max). Thicker and longer maple chips were produced by end-grain milling than by parallel-to-grain milling. The tool geometries of 40°/15° (sharpness of the angle–rake angle), 50°/15°, and 60°/15° for China fir and 40°/25°, 50°/5°, and 60°/5° for maple produced relatively more flow chips with parallel-to-grain milling. Furthermore, the tool geometries of 40°/5°, 50°/15° and 60°/25° produced more flow chips (weight percentage) by end-grain milling of China fir and maple. Received: May 23, 2001 / Accepted: June 28, 2002 Acknowledgment This study was supported by a grant from the National Council of Science, Taiwan (NSC89-2313-B-415-011).     

Preparation of liquid polyesterpolyols from glucose and its methyl derivative

Preparation of liquid polyols from d-(+)-glucose (Glc) and its derivative, methyl--d-glucoside (m-Glc), has been studied. Direct reaction of -caprolactone (CL) with Glc (CL:Glc = 2:1–5:1 in weight ratio) at 150°C using tin(II) 2-ethyl hexanoate (SnEht₂) (series A), in which melted Glc was suspended in CL, resulted in a dark-brown coloration of the reactants. The reaction was accompanied by formation of high molecular weight resins, a pH drop, production of water, and a considerable decrease in the hydroxyl value from the theoretically expected one. In the case of Glc/ethylene glycol (EG)/CL reaction system with SnEht₂ catalyst at 150°C (series B), in which the weight ratio of Glc to EG was fixed at 1:1, Glc dissolved in the EG/CL mixture, but the brown coloration of the reactant mixture still occurred. In this case, the formation of water was enhanced, but the other effects found in series A were suppressed to a considerable extent. In the m-Glc/CL/SnEht₂ reaction system (series C), in which m-Glc reacted with two to five times weight amounts of CL under the same conditions adopted in series A, development of the color, the production of high molecular weight materials and water, and the changes in pH and hydroxyl value were not observed. These results are discussed based on the chemical structural differences: Glc exists mostly in the hemiacetal form, but tautomerizes to the aldehyde, whereas m-Glc is an acetal and is protected from reversion to the aldehyde.     

Phenology and photosynthetic traits of short shoots and long shoots in Betula grossa

Leaf phenology, growth irradiance (i.e., photosynthetic photon flux (PPF) at the leaf surface) and photosynthetic capacity (A(area); measured at a PPF of 1000 micro mol m(-2) s(-1) and expressed on a leaf area basis) were investigated in early leaves (ELs) and late leaves (LLs) of Betula grossa Siebold & Zucc. trees. Early leaves first appeared on morphologically distinct long shoots and short shoots. The appearance of ELs, which was restricted to the bud break period, was followed by the successive appearance of LLs on long shoots only. Late leaves appeared successively until the middle of the growing season. Late leaves started to abscise around the middle of the growing season, whereas ELs on both long and short shoots did not abscise until near the end of the growing season. Solar irradiance was higher at the surface of LLs of late appearance than at the surface of either LLs of early appearance or ELs. Solar irradiance at the surface of ELs decreased after LLs appeared. In both long and short shoots, A(area) of ELs increased and then remained stable for 65-80 days before starting to decrease. Although A(area) was higher in LLs than in ELs for a short time in August, it started to decrease earlier in LLs than in ELs. Area-based nitrogen concentration (N(area)) was higher in LLs than in ELs after August. Although N(area) decreased slowly in ELs after August, it did not decrease in LLs. In both ELs and LLs, A(area)/N(area) decreased with time. The crown was thus characterized by a rapidly growing surface with young LLs having high A(area) and by shaded inner parts with ELs having stable low A(area).     

Vertical profiles of environmental factors within tropical rainforest, Lambir Hills National Park, Sarawak, Malaysia

Environmental factors, such as global solar radiation, wind speed, air temperature, humidity, and CO₂ concentration, were measured above and within the canopy of a tropical rainforest in Lambir Hills National Park, Sarawak, Malaysia. Few data concerning the environment of this forest have been reported. Intensive observations were carried out in 1998, 1999, and 2000 with the following results: (1) The fraction of global solar radiation reaching the upper layer of the canopy varied with global solar radiation above the canopy. Even though the global solar radiation above the canopy fluctuated, the fraction of that reaching the lower canopy and the ground was constantly approximately 5%. (2) The fraction of wind speed reaching each layer of the canopy increased with wind speed above the canopy. Little wind was usually present at the lower canopy. (3) The daytime air temperature at the canopy top was higher than that near the ground. The maximum difference between the air temperature at the canopy top and that at the ground was about 5°C, and the diurnal temperature ranges at the canopy top and those at the ground were about 8°C and about 5°C, respectively. The highest daytime water vapor pressure occurred within the canopy and particularly near the ground. Vertical gradients of water vapor pressure during the day were steep, probably because of high transpiration. (4) In the 1998 observation the minimum and the maximum CO₂ concentrations were 360 ppm in the day and 450 ppm at night, while in the 2000 observation the minimum and the maximum CO₂ concentrations were 350 ppm in the day and 540 ppm at night. The higher CO₂ concentration in the daytime and the lower concentration at night observed during the 1998 observation period were probably due to reduced photosynthesis and soil respiration caused by exceptional dry conditions during the observation period.     

High-speed steel tool wear during wood cutting in the presence of high-temperature corrosion and mineral contamination

Dulling of high-speed steel (HSS) cutting tools after milling five wood species has been analyzed. The wood investigated varied in mineral contamination, high-temperature corrosivity (HTC) and density (D). Experiments performed proved that up to date methods for evaluation of mineral contamination in wood should be improved. A new pipe-like form of mineral contamination particles was evidenced. The correlation between the presence of 3D aggregates of silica in wood and high content of K and Ca in the ash was established. Employing multivariable theoretical simulation method, the combined effect of mineral contamination, HTC and wood density on the tool dullness appeared to be a reasonable explanation of the results obtained.     

Effects of patch cutting on leaf nitrogen nutrition in hinoki cypress (Chamaecyparis obtusa Endlicher) at different elevations along a slope in Japan

Leaf nitrogen nutrition of hinoki cypress (Chamaecyparis obtusa Endlicher) was investigated at three positions along a slope over a period of 3 years. At each slope position, nitrogen properties were compared in patch-cut plots (0.06–0.09 ha) and uncut control plots (0.04 ha). Nitrogen cycling at the lower slope was characterized by a higher rate of soil nitrogen mineralization, and higher nitrogen concentration in fresh leaves and leaf-litter. The soil nitrogen mineralization rate and fresh-leaf nitrogen concentration in the patch-cut plots were higher than those in the control plots. However, leaf-litter nitrogen concentration did not differ between the patch-cut and control plots. The results suggest that slope position strongly affects leaf nitrogen nutrition of hinoki cypress and soil nitrogen availability. By contrast, patch cutting does not affect leaf-litter nitrogen concentration. These findings indicated that hinoki cypress would not enhance forest nitrogen cycling through changes in leaf-litter nitrogen concentration after patch cutting.     

Allometric equations for accurate estimation of above-ground biomass in logged-over tropical rainforests in Sarawak, Malaysia

Although allometric equations can be used to accurately estimate biomass and/or carbon stock in forest ecosystems, few have been developed for logged-over tropical rainforests in Southeast Asia. We developed allometric relationships between tree size variables (stem diameter at breast height (dbh) and tree height) and leaf, branch, stem and total above-ground biomass in two logged-over tropical rainforests with different soil conditions in Sarawak, Malaysia. The study sites were originally classified as mainly lowland dipterocarp forest and have been selectively logged in the past 20 years. In total, 30 individuals from 27 species were harvested to measure above-ground parts. The correlation coefficients for the allometric relationships obtained for total above-ground biomass as a function of dbh had high values (0.99), although the relationships for leaf biomass had a relatively low coefficient (0.83). We also found relatively high coefficients for allometric relationships between tree height and plant-part biomass, ranging from 0.82 to 0.97. Moreover, there were no differences for allometric equations of total above-ground biomass between study sites. A comparison of equations of above-ground biomass in various previously reported tropical rainforests and pan-tropic general equations imply that our allometric equations differ largely from the equations for tropical primary forests, early successional secondary forest, and even for the general models. Therefore, choosing the biomass estimation models for above-ground biomass in the logged-over forests of Southeast Asia requires careful consideration of their suitability.     

Inoculation of fumigated nursery soil increases nodulation and yield of bare-root red alder (Alnus rubra Bong.)

To determine if inoculation increases nodulation and yield of bare-root red alder (Alnus rubra Bong.), fumigated nursery plots were treated with inoculum and ammonium sulfate (28 kg N ha^–1) in a factorial experiment. Inoculum was alder soil with 100 infective units of Frankia g^–1. Seedlings were evaluated for nodulation at age 10 wk and when lifted, at age 9 mo. Inoculation produced earlier and more extensive nodulation and increased seedling root collar diameter, height, and dry weight. Fertilization decreased seedling height, but did not decrease nodulation. No interaction of fertilization with inoculation was found. Inoculated unfertilized plots had the highest yield of packable seedlings (257 m^–2), and uninoculated fertilized seedlings had the lowest yield (126 m^–2).     

Effects of Swertia japonica extract and its main compound swertiamarin on gastric emptying and gastrointestinal motility in mice

The Swertia japonica is used clinically as a remedy for gastrointestinal symptoms in Japan. We examined the effects of a S. japonica and swertiamarin on gastric emptying and gastrointestinal motility in atropine-, dopamine-, and 5-hydroxytryptamine (5-HT)-treated mice. All three preparations inhibited reductions in gastric emptying and gastrointestinal motility induced by dopamine (1 mg/kg, intraperitoneal injection, ip). Neither the powder, swertiamarin, nor itopride had any effect on the reductions in gastric emptying and gastrointestinal motility caused by 5-HT (4 mg/kg, ip). These findings suggest that the powder and swertiamarin stimulate gastric emptying and gastrointestinal motility by inhibiting the dopamine D₂ receptor.     

Automatic detection of washboarding in bandsaws

This paper presents an on-line method for detecting washboarding generated in bandsaws. It uses a parameter based on the shape of sawing force amplitude distributions. The curve of the probability density function of the parallel sawing force amplitude obeyed a normal distribution for the normal sawn surface, but it changed to an M-shaped distribution when washboarding appeared on the sawn surface of the workpiece. The curve of probability density function of the normal sawing force amplitude obeyed the normal distribution for any sawn surface investigated. The workpiece including a knot did not influence use of the parameter for detecting the appearance of washboarding.