Zirconium-Modified Activated Sludge as a Low-Cost Adsorbent for Phosphate Removal in Aqueous Solution

A highly effective zirconium-modified activated sludge (Zr(IV)-AS) adsorbent was prepared from activated sludge and applied to remove phosphate from aqueous solutions by batch and column experiments. Characterized results revealed that zirconium was successfully loaded onto the activated sludge (AS), and the specific surface area and pore volume were substantially improved after zirconium loading on the AS. Zr(IV)-AS exhibited a high adsorption affinity for phosphate and the maximum adsorption amount was 27.55 mg P·g^?1 at 25 °C. Adsorption isotherms of phosphate could be described by the Langmuir model, and the adsorption kinetics were well described by the pseudo-second-order model. Phosphate adsorption on Zr(IV)-AS increased monotonically with decreasing solution pH. The presence of SO₄^2? in water resulted in slightly decreased phosphate adsorption on the adsorbent even at a high concentration (25 mmol/L), and a greater influence of HCO₃^? on adsorption could be ascribed to the increased solution pH with the addition of the HCO₃^?. Column adsorption experimental results showed that the adsorbent has excellent phosphate adsorption properties and that the effluent can meet the requirement of phosphorus in the national wastewater discharge standard of China. Phosphate-saturated Zr(IV)-AS can be effectively desorbed in 0.1 mol L^?1 NaOH solution, and the regenerated adsorbent still possessed the high capacity. The adsorption between the adsorbent and the phosphate is due to the electrostatic interaction and anionic exchange at the surface of the Zr(IV)-AS. Furthermore, this approach provides a possibility of treating wastewater with waste and has the potential for industrial applications for the removal of phosphate from wastewater.     

Effects of temperature on soil organic carbon fractions contents,aggregate stability and structural characteristics of humic substances in a Mollisol

Purpose

Under a global warming scenario, understanding the response of soil organic carbon fractions and aggregate stability to temperature increases is important not only for better understanding and maintaining relevant ecosystem services like soil fertility and crop productivity, but also for understanding key environmental processes intimately related with the maintenance of other regulatory ecosystem services like global climate change mitigation through carbon sequestration. An increase in temperature would accelerate the mineralization of soil organic carbon. However, the properties of organic carbon remained in soil after mineralization is not well known.

Materials and methods

Mollisol was collected at 0–20-cm depth from maize (Zea mays L.) field in Northeast China. A 180-day incubation experiment was conducted at three different temperatures (10, 30, and 50 °C) under constant soil moisture (60 % water holding capacity). Soil samples were assayed for total organic carbon (TOC), water-soluble organic carbon (WSOC), easily oxidizable organic carbon (EOC), humic fractions carbon, aggregate-associated carbon, and water stability of aggregates. Elemental analysis and solid-state ¹³C nuclear magnetic resonance spectroscopy were used to characterize humic acid and humin fractions.

Results and discussion

The contents of soil TOC, EOC, humic fractions carbon, and aggregate-associated carbon decreased with the increase in temperature. The proportion of 2–0.25-mm macroaggregate and the mean weight diameter (MWD) of aggregates also decreased. The C, H, N, S, alkyl C, and O-alkyl C contents of humic acid and humin decreased, whereas the O, aromatic C, and carbonyl C contents increased. The H/C, aliphatic C/aromatic C, and O-alkyl C/aromatic C ratios in humic acid and humin fractions decreased.

Conclusions

The increase in temperature has a negative impact on soil organic carbon content, soil aggregation, and aggregate stability. Moreover, humic acid and humin molecules become less aliphatic and more decomposed with the increase in temperature.

     

Carbon isotopic ratios of wetland and terrace soil sequences in the Maya Lowlands of Belize and Guatemala

This article provides new data and synthesizes earlier findings on the carbon isotope ratios of the humin part of soil organic matter from a range of sites in the central Maya Lowlands. Changes down the soil profile in carbon isotope ratios can provide an important line of evidence for vegetation change and erosion over time, especially in well dated aggrading profiles. Research thus far has provided substantial evidence for significant inputs from C₄ vegetation in buried layers from the Ancient Maya periods in depositional soils but equivocal evidence from sloping soils. We present new findings from soil profiles through ancient Maya wetland fields, upland karst wetlands, ancient Maya aguadas (reservoirs), and ancient Maya terraces. Most of the profiles exhibited δ¹³C enrichment greater than the 2.5–3‰ typical from bacterial fractionation. Seven of nine ancient Maya wetland profiles showed δ¹³C enrichment ranging from 4.25 to 8.56‰ in ancient Maya-dated sediments that also contained phytolith and pollen evidence of grass (C₄ species) dominance. Upland karst sinks and ancient reservoirs produced more modest results for δ¹³C enrichment. These seasonal wetland profiles exhibited δ¹³C enrichment ranging from 1 to 7.3‰ from the surface to ancient Maya-period sediments. Agricultural terraces produced mixed results, with two terraces having substantial δ¹³C enrichment of 5.34 and 5.66‰ and two producing only equivocal results of 1.88 and 3.03‰ from modern topsoils to Maya Classic-period buried soils. Altogether, these findings indicate that C₄ plants made up c. 25% of the vegetation at our sites in the Maya Classic period and only a few percent today. These findings advance the small corpus of studies from ancient terraces, karst sinks, and ancient wetland fields by demonstrating substantial δ¹³C and thus C₄ plant enrichment in soil profile sections dated to ancient Maya times. These studies are also providing a new line of evidence about local and regional soil and ecological change in this region of widespread environmental change in the Late Holocene.     

Atmospheric Mercury Fluxes in a Southern Boreal Forest and Wetland

Total gaseous mercury (TGM) fluxes from the forest floor and a boreal wetland were measured by a flux chamber technique coupled with an automatic mercury vapour analyser. The fluxes were measured at three sampling sites in southern Finland, 61°14′ N, 25°04′ E in summer 2007, with additionally in situ TGM concentrations in the air at one of the sites and mercury bulk deposition at another. Most of the flux data were collected during the daytime. At one of the sites, diurnal flux behaviour was studied, and a clear cycle with an afternoon maximum and a night minimum was observed. The highest emissions (up to 3.5 ng m⁻² h⁻¹) were observed at the forest floor site having a moss and grass cover. At the wetland and litter-rich forest floor sites, the emissions were below 1 ng m⁻² h⁻¹ and sometimes negative (down to −1.0 ng m⁻² h⁻¹), indicating mercury uptake. The measured average fluxes in August were 0.9 ± 1.1 and 0.2 ± 0.3 ng m⁻² h⁻¹ for the forest floor sites and wetland sites, respectively. The flux data were compared with the mercury bulk deposition, which proved to be of the same magnitude, but opposite in sign. At the mossy forest floor site, the extrapolated TGM emissions were 130% of the Hg deposition in August 2007. Comparison with other studies showed that the fluxes in background areas are relatively uniform, regardless of measurement site location and method used. Airborne TGM remained at the background level during the study, with an average value of 1.3 ± 0.2 ng m⁻³; it frequently showed a diurnal cycle pattern.     

Interactive effects of Cd and PAHs on contaminants removal from co-contaminated soil planted with hyperaccumulator plant <Emphasis Type="Italic">Sedum alfredii</Emphasis>

Purpose  

Soil contamination by multiple organic and inorganic contaminants is common but its remediation by hyperaccumulator plants is rarely reported. The growth of a cadmium (Cd) hyperaccumulator Sedum alfredii and removal of contaminants from Cd and polycyclic aromatic hydrocarbons (PAHs) co-contaminated soil were reported in this study.     

Performance and Kinetic Study on Bioremediation of Diazo Dye (Reactive Black 5) in Wastewater Using Spent GAC–Biofilm Sequencing Batch Reactor

Combinations of sequential anaerobic and aerobic process enhance the treatment of textile wastewater. The aim of this study was to investigate the treatment of diazo dye Reactive Black 5 (RB5)-containing wastewater using granular activated carbon (GAC)–biofilm sequencing batch reactor (SBR) as an integration of aerobic and anaerobic process in a single reactor. The GAC–biofilm SBR system demonstrated higher removal of COD, RB5 and aromatic amines. It was observed that the RB5 removal efficiency improved as the concentration of co-substrate in the influent increased. The alternative aeration introduced into the bioreactor enhanced mineralization of aromatic amines. Degradation of RB5 and co-substrate followed second-order kinetic and the constant (k ₂) values for COD and RB5 decreased from 0.002 to 0.001 and 0.004 to 0.001 l/mg h, respectively, as the RB5 concentration increased from 100 to 200 mg/l in the GAC–biofilm SBR system.     

Spatial modelling of the fraction of photosynthetically active radiation absorbed by a boreal mixedwood forest using a lidar–hyperspectral approach

The spatial variability of the fraction of photosynthetically active radiation absorbed by the canopy (fPAR) was characterized for a heterogeneous boreal mixedwood forest site located in northern Ontario, Canada, based on relationships found between fPAR and light detection and ranging (lidar) data over different canopy architectures. Estimates of fPAR were derived from radiation measurements made above the canopy at a flux tower and below-canopy radiation was measured across a range of species compositions and canopy architectures. Airborne lidar data were used to characterize spatial variability of canopy structure around the flux tower and a map of mean canopy chlorophyll concentration was derived from airborne hyperspectral imagery. Different volumes of lidar points for the locations directly above each photosynthetically active radiation (PAR) sensor were examined to determine if there is an optimal method of relating lidar returns to estimated fPAR values.The strongest correlations between mean lidar height and fPAR occurred when using points that fell within a theoretical cone which originated at the PAR sensor having a solid angle α = 55°. For diffuse conditions, the correlation (r) between mean lidar height versus fPAR × chlorophyll was stronger than between mean lidar height versus fPAR by 8% for mean daily fPAR and from 10 to 20% for diurnal fPAR, depending on solar zenith angle. For direct light conditions, the relationship was improved by 12% for mean daily fPAR and 12–41% for diurnal relationships.Linear regression models of mean daily fPAR × chlorophyll versus mean lidar height were used in conjunction with gridded lidar data and the canopy chlorophyll map to generate maps of mean daily fPAR for direct and diffuse sunlight conditions. Site average fPAR calculated from these maps was 0.79 for direct light conditions and 0.78 for diffuse conditions. When compared to point estimates of mean daily fPAR calculated on the tower, the average fPAR was significantly lower than the point estimate. Subtracting the direct sunlight fPAR map from the diffuse sunlight fPAR map revealed a distinct spatial pattern showing that areas with open canopies and relatively low chlorophyll (e.g., black spruce patches) have a higher fPAR under direct sunlight conditions, while closed canopies with higher chlorophyll (e.g., deciduous species) absorb more PAR under diffuse conditions. These findings have implications for scaling from point measurements at flux towers to larger resolution satellite imagery and addressing local scale heterogeneity in flux tower footprints.     

Maintaining Genetic Resources of Peach Palm (<Emphasis Type="Italic">Bactris gasipaes</Emphasis> Kunth): The Role of Seed Migration and Swidden-fallow Management in Northeastern Peru

Knowledge of the effects of farmer practices on population genetic parameters of peach palm (Bactris gasipaes Kunth) is relevant to the improvement and conservation of the palm’s genetic resources. Microsatellite markers were used to assess genetic diversity and population structure of peach palm in swidden-fallow agroforestry systems in northeastern Peru. The study covered eight communities, comprising two study areas 160 km apart – one occupied by indigenous Amerindians and the other by mixed race campesinos. Simultaneous analysis of an ex situ peach palm germplasm collection provided a means to compare population genetic parameters. Farmers who were surveyed on seed selection practices for peach palm reported that an average of only four palms (4.3 for campesino and 1.5 for indigenous populations) were used to provide seed for the establishment of the forest gardens sampled. As expected, inbreeding coefficients observed within communities were relatively high (f = 0.105 − 0.210), however, observed heterozygosities within communities were also high (0.625–0.741). A metapopulation approach was used to describe migration within and among regions, implying a hierarchical structure of gene flow which maintains relatively high levels of genetic diversity. Seed migration was found to occur over longer distances (≤600 km) and at a higher frequency (46% of palms sampled) in the indigenous study area, and a proportionally greater number of alleles was found (49 vs. 43 over three loci) with twice as many private alleles occurring only in the indigenous populations. The farmers’ practice of preserving remnant palms through successive swidden generations may have contributed to the maintenance of alleles by reducing the severity of founder effects. Although the campesino study area exhibited a significant (20% of the variation; p < 0.01) isolation-by-distance relationship across 35 km distance, in general, both study populations had relatively limited genetic structure (θ = 0.012–0.03), which is believed to have resulted from the exchange of seeds over long distances and periods of time.     

Sedimentary characterization of Tagus estuarine beaches (Portugal)

Background, Aim and Scope  The distribution of sediments in estuarine beaches is controlled by the interactions between sediment supply, hydrodynamic processes and human intervention. The main purpose of this study is to characterize the sediments of Tagus estuarine beaches in order to understand their origin and to contribute to a better knowledge of the Tagus estuary sediment budget. Methods  Surface sediment samples were collected across beach profiles and sand grain size analysis was performed by dry sieving. Grain size statistics for the median (d₅₀) and standard deviation (SDM) were obtained using the Moment method. This study was complemented by a qualitative evaluation of the sediment composition. Cross-shore topographic surveys were conducted for selected sampling sites. Results  Tagus estuarine beach sediments are mainly composed of quartz sand particles which are fine-grained and well sorted near the mouth of the estuary and medium to coarse-grained and moderately sorted in the inner domain. Compositional results show evidence of active anthropogenic sediment sources, especially in the coarser fractions. Discussion  The analysis of the textural and compositional characteristics of beach sediments in the inner estuarine domain is compatible with local sedimentary sources, while a marine signature is present at the mouth and inlet channel sediments. In the inner domain, differences in the sedimentary processes are represented by the textural characteristics of the sediments, such as the sorting degree and the gravel content. Sediment characteristics also reflect human intervention in the system, with the introduction of anthropogenic and allochthonous particles and the mixture of sediments from different sources. Conclusions  The sediments of the inner Tagus estuarine beaches are derived from local Plio-Pleistocene outcrops while inlet and outer estuary beaches reveal a dominant marine source. Beach textural variability observed in the inner domain is not related to wave forcing gradients, but mainly to variations in the sedimentary processes along the estuarine margins and to human intervention. Results show that the Tagus estuarine beaches depended, almost exclusively, on sediment input from local sources until the last century. With increasing human occupation, sediment transfers became dominated by anthropogenically related activities mainly connected with the occupation of estuarine margins and dredging. Recommendations and Perspectives  Further studies should extend the present level of knowledge in what concerns sand transport patterns through additional compositional and geochemical analysis, and the development of new techniques in order to allow the quantitative evaluation of the impact of human activities on the sediment budget.     

The inheritance of chemical phenotype in <Emphasis Type="Italic">Cannabis sativa</Emphasis> L. (III): variation in cannabichromene proportion

The mechanism that controls the proportion of cannabichromene (CBC), a potential pharmaceutical, in the cannabinoid fraction of Cannabis sativa L. is explored. As with tetrahydrocannabinol (THC) and cannabidiol (CBD), CBC is an enzymatic conversion product of the precursor cannabigerol (CBG). CBC is reported to dominate the cannabinoid fraction of juveniles and to decline with maturation. This ontogeny was confirmed in inbred lines with different mature chemotypes. A consistent CBC presence was found in early leaves from a diverse clone collection, suggesting that CBC synthase is encoded by a fixed locus. Morphological variants possessing a ‘prolonged juvenile chemotype’ (PJC), a substantial proportion of CBC persisting up to maturity, are presented. PJC is associated with a reduced presence of floral bracts, bracteoles, and capitate-stalked trichomes. Genetic factors causing these features were independent of the allelic chemotype locus B that was previously postulated and regulates THC and CBD synthesis and CBG accumulation. In contrast to previously described Cannabis chemotypes, the cannabinoid composition of PJCs showed plasticity in that reduced light levels increased the CBC proportion. The ability of PJC plants to enable the production of pharmaceutical raw material with high CBC purity is demonstrated.