An Ibero-American inter-laboratory trial to evaluate serological tests for the detection of anti-<Emphasis Type="Italic">Neospora caninum</Emphasis> antibodies in cattle

We carried out an inter-laboratory trial to compare the serological tests commonly used for the detection of specific Neospora caninum antibodies in cattle in Ibero-American countries. A total of eight laboratories participated from the following countries: Argentina (n = 4), Brazil (n = 1), Peru (n = 1), Mexico (n = 1), and Spain (n = 1). A blind panel of well-characterized cattle sera (n = 143) and sera representative of the target population (n = 351) was tested by seven in-house indirect fluorescent antibody tests (IFATs 1–7) and three enzyme-linked immunosorbent assays (ELISAs 1–3; two in-house and one commercial). Diagnostic performance of the serological tests was calculated and compared according to the following criteria: (1) the “Pre-test information,” which uses previous epidemiological and serological data; (2) the “Majority of tests,” which classifies a serum as positive or negative according to the results obtained by most tests evaluated. Unexpectedly, six tests showed either sensitivity (Se) or specificity (Sp) values lower than 90%. In contrast, the best tests in terms of Se, Sp, and area under the ROC curve (AUC) values were IFAT 1 and optimized ELISA 1 and ELISA 2. We evaluated a high number of IFATs, which are the most widely used tests in Ibero-America. The significant discordances observed among the tests regardless of the criteria employed hinder control programs and urge the use of a common test or with similar performances to either the optimized IFAT 1 and ELISAs 1 and 2.     

The effect of dietary energy and protein levels on body weight,size, and microflora of ostrich chicks

Tropical Animal Health and Production - The aim of this study was to evaluate the effect of different dietary energy and protein supplements on performance, weekly body sizes or body frame size,...     

Inclusion of intensively manipulated silage in total mixed ration to growing pigs – influence on silage consumption,nutrient digestibility and pig behaviour

ABSTRACT

This study investigated how intensively manipulated grass/clover silage (finer structure than chopped silage) fed in total mixed ration (TMR), influenced feed consumption, total tract apparent digestibility (TTAD) and pig behaviour. Ten Yorkshire x Hampshire (YH) pigs were included in a digestibility experiment and 64 YH pigs in a behaviour experiment. Pigs received TMR with 20% dry matter inclusion of either intensively manipulated (SI) or chopped silage (SC). Behaviour was registered with instantaneous and continuous sampling. SI pigs consumed more silage (p?=?0.001) and spent more time eating from the through (p?<?0.01), however no significant difference in TTAD was found (p?>?0.05). Less social interactions prior to feeding (p?=?0.029) and less rooting after feeding (p?<?0.05) were found among SI pigs, indicating SI pigs being more satisfied for a longer time after feeding. We conclude that TMR with intensively manipulated silage benefits feed consumption and increases the opportunities for pigs perform feed-related behaviours.     

The impact of installation of automatic milking system on production and reproduction traits of dairy cows

The objective of the research was the evaluation of change in the traditional milking system using automatic milking system in the scope of the selected reproduction features of dairy cows of the Polish Holstein–Friesian breed. Animal material consisted of 2,818 cows used on nine farms equipped with the automatic milking system Astronaut A4 made by Lely. The cows were controlled in the scope of services per conception, service period, length of pregnancy, calving interval and calving to conception period, milk yield, protein and fat content obtained in lactations of 305 days. The selected traits were observed between 2005 and 2015. In this period, the milking system was changed from the conventional to automated one. The collected data material was statistically processed, using the multifactorial analysis of variance. The period between the first calving and the second effective insemination was reduced by 11.8 days, and the period between the second calving and the third effective insemination was shortened by 4 days after the installation of the automatic milking system. The increase in milk yield by 466 kg during 305‐day lactation was observed among primiparous cows. The percentage of protein and fat content in the researched groups decreased; moreover, the fall of intergroup variability was noticeable, which may be a sign of the levelling of the yield within the herd.     

Feasibility of Field Portable Near Infrared (NIR) Spectroscopy to Determine Cyanide Concentrations in Soil

Vicinities of manufactured gas plants were often contaminated with solid iron?Ccyanide complexes as a result of the coal gasification process. During the remediation of affected soils, knowledge about contaminant concentrations is crucial, but laboratory methods are often expensive and time consuming. Rapid and non-destructive field methods for contaminant determination permit an analysis of large sample numbers and hence, facilitate identification of ??hot spots?? of contamination. Diffuse near infrared reflectance spectroscopy has proven to be a reliable analytical tool in soil investigation. In order to determine the feasibility of a Polychromix Handheld Field Portable Near-Infrared Analyzer (FP NIR), various sample preparation methods were examined, including homogenizing, sieving, drying, and grinding. Partial least squares calibration models were developed to determine near infrared (NIR) spectral responses to the cyanide concentration in the soil samples. As a control, the contaminant concentration was determined using conventional flow injection analysis. The experiments revealed that portable near-infrared spectrometers could be a reliable device for detecting cyanide concentrations >2,400?mg?kg^?1 in the field and >1,750?mg?kg^?1 after sample preparation in the laboratory. We found that portable NIR spectrometry cannot replace traditional laboratory analyses due to high limits of detection, but that it could be used for identification of contamination ??hot spots??.     

Inactivation of Heparin by Cationically Modified Chitosan

This study was performed to evaluate the ability of N-(2-hydroxypropyl)-3-trimethylammonium chitosan chloride (HTCC), the cationically modified chitosan, to form biologically inactive complexes with unfractionated heparin and thereby blocking its anticoagulant activity. Experiments were carried out in rats in vivo and in vitro using the activated partial thromboplastin time (APTT) and prothrombin time (PT) tests for evaluation of heparin anticoagulant activity. For the first time we have found that HTCC effectively neutralizes anticoagulant action of heparin in rat blood in vitro as well as in rats in vivo. The effect of HTCC on suppression of heparin activity is dose-dependent and its efficacy can be comparable to that of protamine-the only agent used in clinic for heparin neutralization. HTCC administered i.v. alone had no direct effect on any of the coagulation tests used. The potential adverse effects of HTCC were further explored using rat experimental model of acute toxicity. When administered i.p. at high doses (250 and 500 mg/kg body weight), HTCC induced some significant dose-dependent structural abnormalities in the liver. However, when HTCC was administered at low doses, comparable to those used for neutralization of anticoagulant effect of heparin, no histopathological abnormalities in liver were observed.     

European standards on durability and performance of wood and wood-based products – Trends and challenges

Abstract

Standardization work in the field of wood durability and preservation is managed, at the European level, by the technical committee TC 38 ‘Durability of wood and wood-based products’ of the European Committee for Standardization (CEN). Producing sustainable wood-based materials is challenging. A crucial aspect of their provision is reliable standards that take consideration of both the expectations of end-users and the broad set of parameters that may influence the service life of wooden components such as exposure to moisture, climatic variations and design. In order to reach these objectives, most CEN/TC 38 standards are currently being revised based on the recent scientific, technological and legal developments in the field of wood protection. There is an increasing need for performance classification of wood products in construction and to radically consider how wood durability test methods and standards can inform on service life and how they might be translated into a performance classification system. This paper describes the changes during the past 5–10 years in Europe and how the trajectory of standards development is now on a different pathway. Classification and service life demands are described as well as current approaches to consider key issues such as material resistance, moisture risk and adaptation of existing standards.     

Human lineage-specific amplification, selection, and neuronal expression of DUF1220 domains

Extreme gene duplication is a major source of evolutionary novelty. A genome-wide survey of gene copy number variation among human and great ape lineages revealed that the most striking human lineage-specific amplification was due to an unknown gene, MGC8902, which is predicted to encode multiple copies of a protein domain of unknown function (DUF1220). Sequences encoding these domains are virtually all primate-specific, show signs of positive selection, and are increasingly amplified generally as a function of a species' evolutionary proximity to humans, where the greatest number of copies (212) is found. DUF1220 domains are highly expressed in brain regions associated with higher cognitive function, and in brain show neuron-specific expression preferentially in cell bodies and dendrites.     

Essential and toxic elements in seafood available in poland from different geographical regions

The concentrations of 15 elements (Cu, Fe, Mn, Zn, Co, Ni, Cr, Se, Cd, Pb, Hg, Ca, Na, K, and Mg) were determined in the edible parts of shellfish on sale in the local market in Gdańsk. The samples consisted of three groups--crustaceans, molluscs, and surimi--that are processed to different degrees. For the purposes of this analysis, they were dried, homogenized, and digested in an automatic microwave system. The samples were analyzed quantitatively for Cu, Zn, Fe, Mn, Co, Ni, Cr, Mg, Na, K, and Ca (F-AAS), Cd and Pb (GF-AAS), Se (HG-AAS), and Hg (CV-AAS). The elemental levels detected in shellfish were compared to those in cod, herring, pork, beef, chicken, and eggs. The recommended dietary allowance (RDA) of essential elements and the provisional tolerable weekly intake (PTWI) of toxic elements were estimated. With factor analysis of the data, taxonomically different groups of raw and processed shellfish could be distinguished.     

Antioxidant and antiradical activities in extracts of hazelnut kernel (Corylus avellana L.) and hazelnut green leafy cover

Phenolic compounds in the aqueous systems were extracted, from hazelnut kernel (HK) and hazelnut green leafy cover (HGLC), with 80% (v/v) ethanol (HKe and HGLCe) or 80% (v/v) acetone (HKa and HGLCa). The extracts were examined for their phenolic and condensed tannin contents and phenolic acid profiles (free and esterified fractions) as well as antioxidant and antiradical activities by total antioxidant activity (TAA), antioxidant activity in a beta-carotene-linoleate model system, scavenging of DPPH (2,2-diphenyl-1-picrylhydrazyl) radical, and reducing power. Significant differences (p < 0.05) in the contents of total phenolics, condensed tannins, and TAA existed among the extracts that were examined. HGLCa extract had the highest content of total phenolics (201 mg of catechin equivalents/g of extract), condensed tannins (542 mg of catechin equivalents/g of extract), and TAA (1.29 mmol of Trolox equivalents/g of extract) followed by HGLCe, HKa, and HKe extracts, respectively. Five phenolic acids (gallic acid, caffeic acid, p-coumaric acid, ferulic acid, and sinapic acid) were tentatively identified and quantified, among which gallic acid was the most abundant in both free and esterified forms. The order of antioxidant activity in a beta-carotene-linoleate model system, the scavenging effect on DPPH radical, and the reducing power in all extracts were in the following order: HGLCa > HGLCe > HKa > HKe. These results suggest that both 80% ethanol and acetone are capable of extracting phenolics, but 80% acetone was a more effective solvent for the extraction process. HGLC exhibited stronger antioxidant and antiradical activities than HK itself in both extracts and could potentially be considered as an inexpensive source of natural antioxidants.