Soil compaction and forest floor removal reduced microbial biomass and enzyme activities in a boreal aspen forest soil

Soil enzymes are linked to microbial functions and nutrient cycling in forest ecosystems and are considered sensitive to soil disturbances. We investigated the effects of severe soil compaction and whole-tree harvesting plus forest floor removal (referred to as FFR below, compared with stem-only harvesting) on available N, microbial biomass C (MBC), microbial biomass N (MBN), and microbial biomass P (MBP), and dehydrogenase, protease, and phosphatase activities in the forest floor and 0–10 cm mineral soil in a boreal aspen (Populus tremuloides Michx.) forest soil near Dawson Creek, British Columbia, Canada. In the forest floor, no soil compaction effects were observed for any of the soil microbial or enzyme activity parameters measured. In the mineral soil, compaction reduced available N, MBP, and acid phosphatase by 53, 47, and 48%, respectively, when forest floor was intact, and protease and alkaline phosphatase activities by 28 and 27%, respectively, regardless of FFR. Forest floor removal reduced available P, MBC, MBN, and protease and alkaline phosphatase activities by 38, 46, 49, 25, and 45%, respectively, regardless of soil compaction, and available N, MBP, and acid phosphatase activity by 52, 50, and 39%, respectively, in the noncompacted soil. Neither soil compaction nor FFR affected dehydrogenase activities. Reductions in microbial biomass and protease and phosphatase activities after compaction and FFR likely led to the reduced N and P availabilities in the soil. Our results indicate that microbial biomass and enzyme activities were sensitive to soil compaction and FFR and that such disturbances had negative consequences for forest soil N and P cycling and fertility.     

Influence of non-cellulose structural carbohydrate composition on plant material decomposition in soil

The C mineralisation pattern during the early stage of decomposition of plant materials is largely determined by their content of different carbohydrates. This study investigated whether detailed plant analysis could provide a better prediction of C mineralisation during decomposition than proximate analysis [neutral detergent solution (NDF)/acid detergent solution (ADF)]. The detailed analysis included sugars, fructans, starch, pectin, cellulose, lignin and organic N. To determine whether differences in decomposition rate were related to differences in hemicellulose composition, the analysis particularly emphasised the concentrations of arabinose and xylose in hemicelluloses. Carbon dioxide evolution was monitored hourly in soil amended with ten different plant materials. Principal component and regression analysis showed that C mineralisation during day 1 was closely related to free sugars, fructans and soluble organic N components (R ² = 0.83). The sum of non-cellulose structural carbohydrates (intermediate NDF/ADF fraction) was not related to C mineralisation between days 1 and 9. In contrast, a model including starch and protein in addition to the non-cellulose structural carbohydrates, with the hemicelluloses replaced by arabinose and xylose, showed a strong relationship with evolved CO₂ (R ² = 0.87). Carbon mineralisation between days 9 and 34 was better explained by xylan, cellulose and lignin (R ² = 0.72) than by lignocellulose in the ADF fraction. Our results indicated that proximate analyses were not sufficient to explain differences in decomposition. To predict C mineralisation from the range of plant materials studied, we propose a minimum set of analyses comprising total N, free sugars, starch, arabinose, xylan, cellulose and lignin.     

Salinity and sodicity effects on respiration and microbial biomass of soil

An understanding of the effects of salinity and sodicity on soil carbon (C) stocks and fluxes is critical in environmental management, as the areal extents of salinity and sodicity are predicted to increase. The effects of salinity and sodicity on the soil microbial biomass (SMB) and soil respiration were assessed over 12weeks under controlled conditions by subjecting disturbed soil samples from a vegetated soil profile to leaching with one of six salt solutions; a combination of low-salinity (0.5dSm⁻¹), mid-salinity (10dSm⁻¹), or high-salinity (30dSm⁻¹), with either low-sodicity (sodium adsorption ratio, SAR, 1), or high-sodicity (SAR 30) to give six treatments: control (low-salinity low-sodicity); low-salinity high-sodicity; mid-salinity low-sodicity; mid-salinity high-sodicity; high-salinity low-sodicity; and high-salinity high-sodicity. Soil respiration rate was highest (56–80mg CO₂-C kg⁻¹ soil) in the low-salinity treatments and lowest (1–5mg CO₂-C kg⁻¹ soil) in the mid-salinity treatments, while the SMB was highest in the high-salinity treatments (459–565mg kg⁻¹ soil) and lowest in the low-salinity treatments (158–172mg kg⁻¹ soil). This was attributed to increased substrate availability with high salt concentrations through either increased dispersion of soil aggregates or dissolution or hydrolysis of soil organic matter, which may offset some of the stresses placed on the microbial population from high salt concentrations. The apparent disparity in trends in respiration and the SMB may be due to an induced shift in the microbial population, from one dominated by more active microorganisms to one dominated by less active microorganisms.     

Agronomical,quality, and molecular characterization of twenty Italian emmer wheat (<Emphasis Type="Italic">Triticum dicoccon</Emphasis>) accessions

Emmer wheat (Triticum dicoccon Schrank, 2n = 4x = 28) consists in a hulled wheat; its cultivation has been drastically reduced during the last century as a consequence of its low yield. Recently, its agronomic and nutritive values, as well as the increase of popularity of organic agriculture, have led to a renewed interest making its cultivation economically viable in the marginal lands with an increase of the cultivated areas. In Italy, it mainly survives in few marginal lands of central and southern Italy, where local varieties, adapted to the natural environment from where they originate, are used; moreover, some selected lines have also been developed. In the present work, agro-morphological and qualitative traits, together with molecular analyses of 20 emmer accessions consisting of Italian landraces, breeding lines, and cultivars, were performed. The field experiments were conducted for two consecutive years (2001/2002–2002/2003) in two locations: Viterbo in central Italy, and Foggia in south Italy. The analyzed emmer wheat accessions showed a good amount of genetic variability for both evaluated agro-morphological and molecular traits. This study illustrates an increase in earliness, GY, TW, TKW, and YI going from landraces, breeding lines to cultivars, while the variability does not change proportionally.     

Effects of contact with wood on blood pressure and subjective evaluation

This study examined the effects of contact with wood on the living human body using a physiological index and subjective evaluation. Consecutive blood pressure measurements were used as the physiological index, and sensory evaluation using the semantic differential (SD) method was used for subjective evaluation. Consideration was also given to cases in which materials were cooled and heated as well as kept at room temperature, to eliminate the effects of heat flux due to differences in thermal conductivity between wood and other materials. It was found that contact with wood produced coarse/natural sensations, with no associated increase in systolic blood pressure. Contact with cold wood created subjectively dangerous/uncomfortable but still coarse/natural sensations, also with no associated increase in blood pressure; therefore, there was no correspondence between subjective evaluation and physiological responses. Contact with aluminum kept at room temperature and cold acrylic plastic created flat/artificial and dangerous/uncomfortable sensations, with an associated significant increase in blood pressure; thus, there was a close correlation between subjective evaluation and physiological responses. It was therefore concluded that contact with wood, unlike artificial materials such as aluminum, induces no physiological stress even when kept at room temperature or cooled. Part of this report was presented at the 48th Annual Meeting of the Japan Wood Research Society in Shizuoka, April 1998     

Leaching characteristics of homologues of benzalkonium chloride from wood treated with ammoniacal copper quaternary wood preservative

In Japan, ammoniacal copper quaternary wood preservatives type-1 (ACQ-1), which contains copper and benzalkonium chloride as its active ingredients, is among the most widely used wood preservatives in the pressure treatment of wood. Benzalkonium chloride (BAC) in commercial ACQ-1 products mainly comprises C12 and C14 homologues. In the present study, the leaching characteristics of these BAC homologues were investigated using the heartwood and sapwood portions of Japanese cedar, Japanese larch, and Sakhalin fir treated with ACQ-1 and 1% monoethanolamine (MEA) solution containing equimolar amounts of homologues. Distilled water (DW) and artificial seawater (SW) were used as leaching media. Consequently, it was observed that the leaching rate of the C12 homologue tended to be higher than that of the C14 homologue in DW. The leaching of C12 homologues was accelerated by using SW, resulting in a significantly higher leaching rate than the C14 homologue using SW. It was thought that the difference in the hydrophobicities based on alkyl chain lengths resulted in these phenomena. However, when the heartwood portion of Japanese larch was treated with the homologues in MEA, the leaching rate of the C14 homologue was significantly higher than that of the C12 homologue.     

UV老化后氧化铁颜料着色木纤维-HDPE复合材料的性能变化

探讨了氧化铁颜料对木纤维．高密度聚乙烯复合材耐老化性能的改善作用。采用四种常用的氧化铁颜料与木纤维、高密度聚乙烯和其他加工助剂干混,并用自行设计的双螺杆／单螺杆双阶挤出机组制造木塑复合材料。对该木塑复合材料进行人工加速紫外循环老化处理,用CIE1976L^＊a^＊b^＊表色体系和ASTMD790标准分别对老化前后的材料进行测试,结果显示加入颜料以后木塑复合材料的抗弯弹性模量没有明显的变化,但是弯曲强度都有一定程度的提高。经过2000h人工加速紫外老化以后,不论是颜色要是力学性能都发生了明显的变化。铁红和铁黑着色的试样在整个老化过程中表现较好,颜料添加量约2．28％比较适宜。     

Characterization of the morphological,physical, and mechanical properties of seven nonwood plant fiber bundles

The morphological, physical, and mechanical properties of the nonwood plant fiber bundles of ramie, pineapple, sansevieria, kenaf, abaca, sisal, and coconut fiber bundles were investigated. All fibers except those of coconut fiber had noncircular cross-sectional shapes. The crosssectional area of the fiber bundles was evaluated by an improved method using scanning electron microscope images. The coefficient factor defined as the ratio of the cross-sectional area determined by diameter measurement, to the cross-sectional area determined by image analysis was between 0.92 and 0.96 for all fibers. This indicated that the area determined by diameter measurement was available. The densities of the fiber bundles decreased with increasing diameters. The diameters of each fiber species had small variation of around 3.4%-9.8% within a specimen. The tensile strength and Young’s modulus of ramie, pineapple, and sansevieria fiber bundles showed excellent values in comparison with the other fibers. The tensile strength and Young’s modulus showed a decreasing trend with increasing diameter of fiber bundles.     

Storage of biomass and net primary productivity in desert shrubland of Artemisia ordosica on Ordos Plateau of Inner Mongolia, China

Biomass and net primary productivity （NPP） are two important parameters in determining ecosystem carbon pool and carbon sequestration. The biomass storage and NPP in desert shrubland of Artemisia ordosica on Ordos Plateau were investigated with method of harvesting standard size shrub in the growing season （June-October） of 2006. Results indicated that above- and belowground biomass of the same size shrubs showed no significant variation in the growing season （p〉0.1）, but annual biomass varied significantly （p〈 0.01）. In the A. ordosica community, shrub biomass storage was 699.76-1246.40 g.m^-2 and annual aboveground NPP was 224.09 g-m^-2·a^-1. Moreover, shrub biomass and NPP were closely related with shrub dimensions （cover and height） and could be well predicted by shrub volume using power regression.