Distribution and migration of Japanese common squid, Todarodes pacificus, in the southwestern part of the East (Japan) Sea

Data on squid catches of Korean and Japan, water temperatures at depth of 100 m, and night-visible images of fishing boats collected in the East (Japan) Sea from 1970 to 1999 were analyzed to examine the distribution and migration of the Japanese common squid, Todarodes pacificus, in the southwestern part of the East (Japan) Sea. The main fishing grounds detected from squid catch in each grid (0.5° latitude × 0.5° longitude) by Korean squid fishery and night-visible images provided by the Defense Meteorological Satellite Program (DMSP) Operational Linescan System (OLS) were situated in the southwestern part of the East (Japan) Sea. The distribution and migration route was illustrated from squid catch in each grid and DMSP OLS image. In years of high catches, the fishing grounds were situated mainly between Ulleung Island and the eastern coastal waters of Korea, while in years of low catches they were situated between Ulleung Island and the Yamato Bank in the central East (Japan) Sea. The center of fishing activity began moving northward from around the Korea/Tsushima strait to the northern boundary of the Tsushima Warm Current in March, reaching into the Yamato Bank in September, and then returning to the strait by February. The northward and southward migration routes differed; the northward migration route occurred closer to the mainland coast of Korea than the southward migration route did. This work suggests T. pacificus begin their northward migration almost 2 months earlier than previously suggested.     

Metal levels in street sediment from an industrial city: spatial trends, chemical fractionation, and management implications

Background, aim and scope  Street sediment samples were collected at 50 locations in a mixed land use area of Hamilton, Ontario, Canada, and metal levels were analyzed using a sequential extraction procedure for different particle size classes to provide an estimate of potential toxicity as well as the potential for treatment through best management practices (BMPs). Methodology  The street sediment samples were dry sieved into four different particle size categories and a sequential extraction procedure was done on each size category following the methodology proposed by Tessier et al. 1979 using a Hitachi 180-80 Polarized Zeeman Atomic Absorption Spectrophotometer. Results and discussion  Analysis of variance, post hoc least-significant difference tests, and kriging analysis showed that spatially Mn and Fe levels were associated with a well-defined heavy industrial area that includes large iron- and steel-making operations; Cu and Pb were associated with both the industrial and high-volume traffic areas, while Zn tended to be more associated with high-volume traffic areas. The potential bioavailability of the metals, based on the sum of chemical fractions 1 (exchangeable) and 2 (carbonate-bound), decreased in order: Zn > Cd > Mn > Pb > Cu > Fe. Based on aquatic sediment quality guidelines, there is some concern regarding the potential impact of the street sediment when runoff reaches receiving waters. Conclusions  It is possible that a combination of BMPs, including street sweeping and constructed wetlands, could help to reduce street sediment impact on environmental quality in the Hamilton region. The data presented here would be important in developing and optimizing the design of these BMPs.     

Characterization of the DNA nucleotide sequences in the genome of red sea bream iridoviruses isolated in Korea

The nucleotide sequences of DNA fragments amplified by polymerase chain reaction (PCR) from four different genomic regions of nine red sea bream iridoviruses (RSIVs) isolated from different species of fish, different areas and in different years in Korea were compared with the reported reference sequences. One isolate, RSIV Namhae, showed 100% homology to the reference sequences, while the other eight isolates, which appeared to contain identical nucleotide sequences, showed 96.6–98.9% homology with reference sequences depending upon the target regions of PCR gene amplification. However, differences in nucleotide sequences were not apparent between the RSIVs isolated in different locations, in different years or in different host species. We also cloned and sequenced the 3′ end flanking region (K1) of the DNA polymerase (DPOL) gene using the cassette ligation-mediated PCR method. This sequence was 4436-bp long and possessed two open reading frames (ORF-1 and ORF-2) oriented in opposite directions. The putative proteins encoded by these two ORFs could not be characterized by comparison with the proteins of other species in the data banks. The presence of the ribonucleotide reductase small subunit (RNRS) gene at the 3′ end of the K1 region allowed us to determine that these two genes, RNRS and DPOL, are separated 5508 bp and oriented in the same direction in the genome of RSIV. Moreover, it is of interest that a PstI-restriction fragment, of which the sequence but not the location within the RSIV genome had previously been reported, is located at nucleotide positions from 1096 to 2054, extending from within the ORF-1 region, spanning the intervening sequence between ORF-1 and ORF-2, and extending into the ORF-2 region. Various repeating sequences up to 86 bp were present at the 3′ ends of ORFs, especially within the nucleotide sequences at the 3′ terminus of ORF-2. No similarities were detected when the DNA sequences of the K1 region were compared to the DNA sequences of a repetitive element in the genome of other iridoviruses.     

First discovery of a cave-dwelling Tineid moth （Lepidoptera,Tineidae） from East Asia

In this study, we report Monopis crocicapitella （Clemens, 1859） （Tineidae）, which was collected from bat guano in a cave in the southern region of Korea, for the first time from East Asia. We briefly redescribe and illustrate the external morphology and genital structures of both sexes. Also, we discuss the local habitat characteristics and some of the ecological information that was observed during our field investi-gation.     

Natural biological control of <Emphasis Type="Italic">Halyomorpha halys</Emphasis> by native egg parasitoids: a multi-year survey in northern Delaware

Halyomorpha halys (Stål) is a highly polyphagous plant pest native to eastern Asia. Since its accidental introduction to the USA in the mid-1990s, it has spread across North America and caused serious economic damages. Chemical control has been a widely applied management strategy which is not sustainable on a long-term basis. A nine-year survey using sentinel and naturally laid H. halys was conducted to investigate the extent of natural biological control by parasitoids in managed and non-managed landscapes in northern Delaware, USA. Naturally laid egg masses of native pentatomids were collected to compare the resident parasitoid complex to the one attacking H. halys eggs. Mean parasitism rates of sentinel eggs were below 6% in any given year of the survey with a grand mean of 1.79%. Parasitism of naturally laid H. halys eggs was higher than that of sentinel eggs, but there was no significant difference in parasitism between years and the grand mean was 4.31%. Parasitoid species richness on sentinel and naturally laid H. halys eggs was similar but both were lower than the richness on native pentatomid eggs. H. halys eggs were parasitized by eight species in the genera Anastatus, Trissolcus, Telenomus, and Ooencyrtus. The level of parasitism by native egg parasitoids is insufficient to provide long-term control of H. halys. Trissolcus japonicus (Ashmead), an Asian egg parasitoid that has been recovered in the USA in several locations since 2014, may be the most promising candidate for long-term biological control of H. halys.     

Adsorption of metal and uranyl ions onto amidoximated Pinus densiflora bark

Pine (Pinus densiflora) bark was chemically modified by grafting with acrylonitrile (AN) through Fenton reaction and conversion of the cyano group to an amidoxime group by reaction with hydroxylamine. Treatments of pine bark with 160 mM H₂O₂ at 40°C yielded ~70% grafting in 6-h reaction. After alkali hydrolysis of amidoximated pine bark (AOPB), its adsorption capacity (q _e) for copper ions was largely increased from 0.5 to 1.8 mmol/g. Adsorption of the hydrolyzed AOPB (HAOPB) followed the pseudo-second-order kinetic model. Among the metal ions tested, the order of adsorption capacity (q _e) predicted by the kinetic model at equilibrium time was Hg²⁺ > UO₂ ²⁺ > Cd²⁺ > Cu²⁺ > Zn²⁺ > Ni²⁺. The adsorption process was pH-dependent, and the adsorption equilibrium was observed in the pH range of 6–7 for all the metal ions. Even though pine bark is a good adsorbent for Hg²⁺ and UO₂ ²⁺ ions, it had a poor affinity for the other ions tested. It was obviously found that HAOPB had very high adsorption abilities for heavy metal and uranyl ions.     

Prediction of bending properties for structural glulam using optimized distributions of knot characteristics and laminar MOE

This study established a prediction model for bending properties of glued-laminated timber (glulam) using optimized knot and modulus of elasticity (MOE) distributions of lumber laminate as the main input variables. For this purpose, knot and MOE data were investigated for all pieces of lumber that were prepared for glulam manufacturing, and statistical distributions of knot size, knot number in one lumber, and MOE of each laminate were optimized as distribution functions. These knot and MOE data were used as input variables in the prediction model for bending properties, and were also used in generating virtual glulam using the inverse transform method. Prediction of bending properties for glulam was carried out using the transformed section method, which is partially provided in ASTM D 3737 (Annex A4). Predicted values were compared with those from full-scale four-point bending tests for 60 six-layered glulams with 10 different laminar combinations. Finally, the allowable bending properties of glulam for each specific laminate combination were determined by calculating the fifth percentile of the modulus of rupture and the average modulus of elasticity from virtual test results of more than 1000 virtual glulams. From the results of this study, predicted bending properties for glulam and their distributions could be used for structural design in both allowable stress design and limit state design.     

Effect of catheter size and injection rate of contrast agent on enhancement and image quality for triple‐phase helical computed tomography of the liver in small dogs

Rapid contrast injection is recommended for triple‐phase helical computed tomography (CT) of the liver. However, a large‐gauge catheter is needed for faster contrast injection and this is not practical for small breed dogs or cats. The purpose of this crossover group study was to evaluate applicability of a lower injection rate with a small‐gauge (G) catheter for triple‐phase hepatic CT in small dogs. Triple‐phase CT images were acquired for six beagle dogs using three protocols: an injection rate of 1.5 ml/s with a 24 G catheter, 3.0 ml/s with a 22 G catheter, and 4.5 ml/s with a 20 G catheter. Enhancement of the aorta, portal vein, and hepatic parenchyma was measured in each phase (arterial, portal, and delayed) and image quality was scored subjectively by two observers. Injection duration, time to scan delay, and time to peak enhancement were also recorded. Contrast injection duration decreased with a higher injection rate (n = 6, P ≤ 0.01), but time to peak enhancement and time to scan delay were not significantly affected by injection rates and catheter sizes. Contrast injection rate did not significantly affect aortic, portal, and hepatic enhancement. In addition, separation between each phase and quality of images was subjectively scored as good regardless of injection rate. Findings from the current study supported using an injection rate of 1.5 ml/s with a catheter size of 24 G for triple‐phase hepatic CT in small dogs (weight < 12 kg).     

Effect of heat treatment on the antioxidant activity of extracts from citrus peels

The effect of heat treatment on the antioxidant activity of extracts from Citrus unshiu peels was evaluated. Citrus peels (CP) (5 g) were placed in Pyrex Petri dishes (8.0 cm diameter) and heat-treated at 50, 100, or 150 degrees C for 10, 20, 30, 40, 50, and 60 min in an electric muffle furnace. After heat treatment, 70% ethanol extract (EE) and water extract (WE) (0.1 g/10 mL) of CP were prepared, and total phenol contents (TPC), radical scavenging activity (RSA), and reducing power of the extracts were determined. The antioxidant activities of CP extracts increased as heating temperature increased. For example, heat treatment of CP at 150 degrees C for 60 min increased the TPC, RSA, and reducing power of EE from 71.8 to 171.0 microM, from 29.64 to 64.25%, and from 0.45 to 0.82, respectively, compared to non-heat-treated control. In the case of WE from CP heat-treated at the same conditions (150 degrees C for 60 min), the TPC, RSA, and reducing power also increased from 84.4 to 204.9 microM, from 15.81 to 58.26%, and from 0.27 to 0.96, respectively. Several low molecular weight phenolic compounds such as 2,3-diacetyl-1-phenylnaphthalene, ferulic acid, p-hydroxybenzaldoxime, 5-hydroxyvaleric acid, 2,3-diacetyl-1-phenylnaphthalene, and vanillic acid were newly formed in the CP heated at 150 degrees C for 30 min. These results indicated that the antioxidant activity of CP extracts was significantly affected by heating temperature and duration of treatment on CP and that the heating process can be used as a tool for increasing the antioxidant activity of CP.     

Metabolism of flupyrazofos in the isolated perfused rat liver

To investigate the hepatic metabolism of the new insecticide flupyrazofos [O,O-diethyl O-(1-phenyl-3-trifluoromethylpyrazol-5-yl) phosphorothioate], isolated rat liver was perfused with flupyrazofos under single-pass conditions. In outflow perfusate and bile, 1-phenyl-3-trifluoromethyl-5-hydroxyprazole (PTMHP), PTMHP-sulfate and PTMHP-glucuronide conjugates were identified as the metabolites of flupyrazofos. However, O,O-diethyl O-(1-phenyl-3-trifluoromethylpyrazol-5-yl) phosphate (flupyrazofos oxon) was not detected. A HPLC method with UV detection was used to investigate the hepatic disposition of flupyrazofos and its metabolite PTMHP. The concentrations of flupyrazofos, PTMHP and PTMHP conjugates in outflow perfusate reached steady-state levels within 20 min after commencing perfusion of 7.3 microM flupyrazofos. At steady state, the mean extraction ratio of flupyrazofos was 0.93 (+/- 0.01) and clearance was 26.1 (+/- 0.2) ml min-1 which nearly approached perfusate flow rate (28 ml min-1). PTMHP accounted for 55.7 (+/- 5.8)% of eliminated flupyrazofos and was recovered as unchanged PTMHP, PTMHP-sulfate and PTMHP-glucuronide in the bile as well as the outflow perfusate.