Using midday stem water potential for scheduling deficit irrigation in mid–late maturing peach trees under Mediterranean conditions

Irrigation techniques that reduce water applications are increasingly applied in areas with scarce water resources. In this study, the effect of two regulated deficit irrigation (RDI) strategies on peach [Prunus persica (L.) Batsch cv. “Catherine”] performance was studied over three growing seasons. The experimental site was located in Murcia (SE Spain), a Mediterranean region. Two RDI strategies (restricting water applications at stage II of fruit development and postharvest) based on stem water potential (Ψ_s) thresholds (?1.5 and ?1.8 MPa during fruit growth and ?1.5 and ?2.0 MPa during postharvest) were compared to a fully irrigated control. Soil water content (θ_v), Ψ_s, gas exchange parameters, vegetative growth, crop load, yield and fruit quality were determined. RDI treatments showed significantly lower values of θ_v and Ψ_s than control trees when irrigation water was restricted, causing reductions in stomatal conductance and photosynthesis rates. Vegetative growth was reduced by RDI, as lower shoot lengths and pruning weights were observed under those treatments when compared to control. However, fruit size and yield were unaffected, and fruit quality was slightly improved by RDI. Water savings from 43 to 65 % were achieved depending on the year and the RDI strategy, and no negative carryover effect was detected during the study period. In conclusion, RDI strategies using Ψ_s thresholds for scheduling irrigation in mid–late maturing peach trees under Mediterranean conditions are viable options to save water without compromising yield and even improving fruit quality.     

Modeling soil water dynamics in a drip-irrigated intercropping field under plastic mulch

Intercropping, drip irrigation, and the use of plastic mulch are important management practices, which can, when utilized simultaneously, increase crop production and save irrigation water. Investigating soil water dynamics in the root zone of the intercropping field under such conditions is essential in order to understand the combined effects of these practices and to promote their wider use. However, not much work has been done to investigate soil water dynamics in the root zone of drip-irrigated, strip intercropping fields under plastic mulch. Three field experiments with different irrigation treatments (high T1, moderate T2, and low T3) were conducted to evaluate soil water contents (SWC) at different locations, for different irrigation treatments, and with respect to dripper lines and plants (corn and tomatoes). Experimental data were then used to calibrate the HYDRUS (2D/3D) model. Comparison between experimental data and model simulations showed that HYDRUS (2D/3D) described different irrigation events and SWC in the root zone well, with average relative errors of 10.8, 9.5, and 11.6 % for irrigation treatments T1, T2, and T3, respectively, and with corresponding root mean square errors of 0.043, 0.035, and 0.040 cm³ cm^?3, respectively. The results showed that the SWC in the shallow root zone (0–40 cm) was lower under non-mulched locations than under mulched locations, irrespective of the irrigation treatment, while no significant differences in the SWC were observed in the deeper root zone (40–100 cm). The SWC in the shallow root zone was significantly higher for the high irrigation treatment (T1) than for the low irrigation treatment, while, again, no differences were observed in the deeper root zone. Simulations of two-dimensional SWC distributions revealed that the low irrigation treatment (T3) produced serious severe water stress (with SWCs near the wilting point) in the 30–40 cm part of the root zone, and that using separate drip emitter lines for each crop is well suited for producing the optimal soil water distribution pattern in the root zone of the intercropping field. The results of this study can be very useful in designing an optimal irrigation plan for intercropped fields.     

Atmospheric Mercury Fluxes in a Southern Boreal Forest and Wetland

Total gaseous mercury (TGM) fluxes from the forest floor and a boreal wetland were measured by a flux chamber technique coupled with an automatic mercury vapour analyser. The fluxes were measured at three sampling sites in southern Finland, 61°14′ N, 25°04′ E in summer 2007, with additionally in situ TGM concentrations in the air at one of the sites and mercury bulk deposition at another. Most of the flux data were collected during the daytime. At one of the sites, diurnal flux behaviour was studied, and a clear cycle with an afternoon maximum and a night minimum was observed. The highest emissions (up to 3.5 ng m⁻² h⁻¹) were observed at the forest floor site having a moss and grass cover. At the wetland and litter-rich forest floor sites, the emissions were below 1 ng m⁻² h⁻¹ and sometimes negative (down to −1.0 ng m⁻² h⁻¹), indicating mercury uptake. The measured average fluxes in August were 0.9 ± 1.1 and 0.2 ± 0.3 ng m⁻² h⁻¹ for the forest floor sites and wetland sites, respectively. The flux data were compared with the mercury bulk deposition, which proved to be of the same magnitude, but opposite in sign. At the mossy forest floor site, the extrapolated TGM emissions were 130% of the Hg deposition in August 2007. Comparison with other studies showed that the fluxes in background areas are relatively uniform, regardless of measurement site location and method used. Airborne TGM remained at the background level during the study, with an average value of 1.3 ± 0.2 ng m⁻³; it frequently showed a diurnal cycle pattern.     

Interactive effects of Cd and PAHs on contaminants removal from co-contaminated soil planted with hyperaccumulator plant <Emphasis Type="Italic">Sedum alfredii</Emphasis>

Purpose  

Soil contamination by multiple organic and inorganic contaminants is common but its remediation by hyperaccumulator plants is rarely reported. The growth of a cadmium (Cd) hyperaccumulator Sedum alfredii and removal of contaminants from Cd and polycyclic aromatic hydrocarbons (PAHs) co-contaminated soil were reported in this study.     

Performance and Kinetic Study on Bioremediation of Diazo Dye (Reactive Black 5) in Wastewater Using Spent GAC–Biofilm Sequencing Batch Reactor

Combinations of sequential anaerobic and aerobic process enhance the treatment of textile wastewater. The aim of this study was to investigate the treatment of diazo dye Reactive Black 5 (RB5)-containing wastewater using granular activated carbon (GAC)–biofilm sequencing batch reactor (SBR) as an integration of aerobic and anaerobic process in a single reactor. The GAC–biofilm SBR system demonstrated higher removal of COD, RB5 and aromatic amines. It was observed that the RB5 removal efficiency improved as the concentration of co-substrate in the influent increased. The alternative aeration introduced into the bioreactor enhanced mineralization of aromatic amines. Degradation of RB5 and co-substrate followed second-order kinetic and the constant (k ₂) values for COD and RB5 decreased from 0.002 to 0.001 and 0.004 to 0.001 l/mg h, respectively, as the RB5 concentration increased from 100 to 200 mg/l in the GAC–biofilm SBR system.     

Effects of temperature on soil organic carbon fractions contents,aggregate stability and structural characteristics of humic substances in a Mollisol

Purpose

Under a global warming scenario, understanding the response of soil organic carbon fractions and aggregate stability to temperature increases is important not only for better understanding and maintaining relevant ecosystem services like soil fertility and crop productivity, but also for understanding key environmental processes intimately related with the maintenance of other regulatory ecosystem services like global climate change mitigation through carbon sequestration. An increase in temperature would accelerate the mineralization of soil organic carbon. However, the properties of organic carbon remained in soil after mineralization is not well known.

Materials and methods

Mollisol was collected at 0–20-cm depth from maize (Zea mays L.) field in Northeast China. A 180-day incubation experiment was conducted at three different temperatures (10, 30, and 50 °C) under constant soil moisture (60 % water holding capacity). Soil samples were assayed for total organic carbon (TOC), water-soluble organic carbon (WSOC), easily oxidizable organic carbon (EOC), humic fractions carbon, aggregate-associated carbon, and water stability of aggregates. Elemental analysis and solid-state ¹³C nuclear magnetic resonance spectroscopy were used to characterize humic acid and humin fractions.

Results and discussion

The contents of soil TOC, EOC, humic fractions carbon, and aggregate-associated carbon decreased with the increase in temperature. The proportion of 2–0.25-mm macroaggregate and the mean weight diameter (MWD) of aggregates also decreased. The C, H, N, S, alkyl C, and O-alkyl C contents of humic acid and humin decreased, whereas the O, aromatic C, and carbonyl C contents increased. The H/C, aliphatic C/aromatic C, and O-alkyl C/aromatic C ratios in humic acid and humin fractions decreased.

Conclusions

The increase in temperature has a negative impact on soil organic carbon content, soil aggregation, and aggregate stability. Moreover, humic acid and humin molecules become less aliphatic and more decomposed with the increase in temperature.

     

Patterns of SSR variation in bread wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.) seeds under ex situ genebank storage and accelerated ageing

Maintaining seed viability and germplasm integrity is a challenging task in conservation of plant genetic resources, as seeds under storage will lose viability and genetic changes will occur. Attempt was made to analyze the patterns of genetic changes in wheat germplasm under ex situ genebank storage and accelerated ageing treatments. A set of 16 naturally aged wheat accessions under ex situ genebank storage since 1994 were sampled. Four recently regenerated wheat accessions were selected, four random seed samples were chosen from each accession, and three of them were exposed to three different accelerated ageing treatments. These 32 seed samples in two germplasm sets displayed a range of germination rates from 4 to 98 %. Thirty-seven microsatellite markers representing 21 wheat chromosomes were applied to screen 12 seeds of each sample and 449 SSR alleles were scored. Large SSR variation was found in each germplasm set. There was 73.1 % of the total SSR variation present among the naturally aged samples and 78.2 % present among the accelerated ageing samples. Several analyses for genetic association consistently revealed no clear genetic separations among samples of high or low germination rates in both germplasm sets. Samples under different accelerated ageing treatments did not show much genetic differentiations from the original sample of each accession. Mantel tests revealed non-significant associations between SSR variability and sample germination rates for both germplasm sets. These findings are useful for understanding seed deterioration under different ageing conditions and suggest that genome-wide SSR variability may not provide sensitive markers for the monitoring of wheat seed viability.     

Characteristics of Nitrogen Loss through Surface-Subsurface Flow on Red Soil Slopes of Southeast China

Soil nitrogen (N) loss related to surface flow and subsurface flow (including interflow and groundwater flow) from slope lands is a global issue. A lysimetric experiment with three types of land cover (grass cover, GC; litter cover, LC; and bare land, BL) were carried out on a red soil slope land in southeast China. Total Nitrogen (TN) loss through surface flow, interflow and groundwater flow was observed under 28 natural precipitation events from 2015 to 2016. TN concentrations from subsurface flow on BL and LC plots were, on average, 2.7–8.2 and 1.5–4.4 times greater than TN concentrations from surface flow, respectively; the average concentration of TN from subsurface flow on GC was about 36–56% of that recorded from surface flow. Surface flow, interflow and groundwater flow contributed 0–15, 2–9 and 76–96%, respectively, of loss load of TN. Compared with BL, GC and LC intercepted 83–86% of TN loss through surface runoff; GC intercepted 95% of TN loss through subsurface flow while TN loss through subsurface flow on LC is 2.3 times larger than that on BL. In conclusion, subsurface flow especially groundwater flow is the dominant hydrological rout for N loss that is usually underestimated. Grass cover has the high retention of N runoff loss while litter mulch will increase N leaching loss. These findings provide scientific support to control N runoff loss from the red soil slope lands by using suitable vegetation cover and mulching techniques.     

Zirconium-Modified Activated Sludge as a Low-Cost Adsorbent for Phosphate Removal in Aqueous Solution

A highly effective zirconium-modified activated sludge (Zr(IV)-AS) adsorbent was prepared from activated sludge and applied to remove phosphate from aqueous solutions by batch and column experiments. Characterized results revealed that zirconium was successfully loaded onto the activated sludge (AS), and the specific surface area and pore volume were substantially improved after zirconium loading on the AS. Zr(IV)-AS exhibited a high adsorption affinity for phosphate and the maximum adsorption amount was 27.55 mg P·g^?1 at 25 °C. Adsorption isotherms of phosphate could be described by the Langmuir model, and the adsorption kinetics were well described by the pseudo-second-order model. Phosphate adsorption on Zr(IV)-AS increased monotonically with decreasing solution pH. The presence of SO₄^2? in water resulted in slightly decreased phosphate adsorption on the adsorbent even at a high concentration (25 mmol/L), and a greater influence of HCO₃^? on adsorption could be ascribed to the increased solution pH with the addition of the HCO₃^?. Column adsorption experimental results showed that the adsorbent has excellent phosphate adsorption properties and that the effluent can meet the requirement of phosphorus in the national wastewater discharge standard of China. Phosphate-saturated Zr(IV)-AS can be effectively desorbed in 0.1 mol L^?1 NaOH solution, and the regenerated adsorbent still possessed the high capacity. The adsorption between the adsorbent and the phosphate is due to the electrostatic interaction and anionic exchange at the surface of the Zr(IV)-AS. Furthermore, this approach provides a possibility of treating wastewater with waste and has the potential for industrial applications for the removal of phosphate from wastewater.