Failure characterisation in polymer matrix composite for un-notched and notched (open-hole) specimens under tension condition

This paper presents an investigation of the influences causing failure in the materials comprising polymer matrix composites. Structures with differences in stacking sequences and design configuration are analysed. The objective of this study is to investigate and evaluate the reasons for the failure of composite lamination structures in terms of stress, strength, strain, and Young modulus within a morphology observation of composite materials. The materials selected for the study were a chopped strand mat (CSM) and a woven roving (WR) fabric. These materials are used as reinforcement and are produced by the hand lay-up technique using epoxy and polyester matrix resin. The experiment was performed using specimens made of notched (open-hole; OH) tension and un-notched (UN) shapes. The characteristics of different shapes, materials, and lamination structures are studied in this research. The results showed the failure phenomenon in the structure of the polymer matrix composite is dependent on the characteristics of the material used and the design configuration of both structures.     

Inheritance of seed weight and growth habit in 10 intercross chickpea (Cicer arietinum) nested association mapping populations

Objective of investigation

Chickpea is a major global food legume for which seed weight and plant growth habit are important yield and harvestability components for plant breeding. This study tested seed weight and plant growth habit inheritance and identified quantitative trait loci (QTL).

Experimental material

A 10 nested association mapping (NAM) populations of chickpea were created from crosses between ‘Gokce’, a cultivar and wild crop relative accessions of Cicer reticulatum and Cicer echinospermum. Families were then developed to the F2:4 generation.

Method of investigation

A 10 families were grown at the Field Experiment Station, Harran University near Şanlıurfa, Turkey during 2019.

Data collection

A 100-seed weight and prostrate or erect growth habit was scored in the field. Two families were genotyped for 60 single-nucleotide polymorphisms (SNP).

Result and conclusions

A 100-seed weight showed polygenic control, and three QTLs were found. Growth habit was controlled by one or two QTLs. The two traits were significantly correlated for five populations. The crop wild relatives of chickpea contain variations at novel loci affecting seed weight compared to the literature.     

SPERMATIC GRANULOMA IN THE RAM: DIAGNOSIS BY ULTRASONOGRAPHY AND SEMEN CHARACTERISTICS

Ultrasonographic appearance of the testis and epididymis, and seminal characteristics, with regard to localization of spermatic granuloma were studied. In rams with spermatic granuloma (n = 9), diagnosed by clinical or ultrasonographic examinations before histopathological confirmation, localization of each lesion was recorded. Epididymal granulomas, caput and cauda, were seen as anechoic or hyperechoic areas with a distinct margin with or without a hyperechoic capsule. Granulomas in the testis were microscopic and, therefore, could not be detected by ultrasonography. Enlargement in the mediastinum testis was detected in all rams when there were granulomas in the caput. Heterogeneous testis parenchyma invaded by numerous hyperechoic foci, representing testicular degeneration, was associated with granulomas both in the epididymis and testis. Ultrasonographic appearance of the lesions did not differ with regard to season. Seminal characteristics varied between rams. It was concluded that ultrasonographic evaluation may give valuable information in the diagnosis of sperm granuloma in the ram.     

Correction to: Biological,environmental and socioeconomic threats to citrus lime production

Journal of Plant Diseases and Protection - In the original publication, Narouei-Khandan et al.’s reference detail was incorrectly crosslinked with another article and missed to include in the...     

Woven Kenaf/Kevlar Hybrid Yarn as potential fiber reinforced for anti-ballistic composite material

Woven Kenaf/Kevlar Hybrid Yarn is the combination of natural and synthetic fibers in the form of thread or yarn. The yarn is weaved to form a fabric type of fiber reinforced material. Then, the fabric is fabricated with epoxy as the resin to form a hybrid composite. For composite fabrication, woven fabric Kenaf/Kevlar hybrid yarn composite was prepared with vacuum bagging hand lay-up method. Woven fabric Kenaf/Kevlar hybrid yarn composite was fabricated with total fiber content of 40 % and 60 % of Epoxy as the matrix. The fiber ratios of Kenaf/Kevlar hybrid yarn were varied in weight fraction of 30/70, 50/50 and 70/30 respectively. The composites of woven fabric Kenaf/Epoxy and woven fabric Kevlar/Epoxy were also fabricated for comparison. The mechanical properties of five (5) samples composites were tested accordingly. Result has shown that of value of strength and modulus woven fabric Kenaf/Kevlar Hybrid Yarn composite was increased when the Kevlar fiber content increased. Therefore, among the hybrid composite samples result showed the woven fabric Kenaf/Kevlar Hybrid Yarn composites with the composition of 30/70 ratio has exhibited the highest energy absorption with 148.8 J which 28 % lower than Kevlar 100 % sample. The finding indicated there is a potential combination of natural fiber with synthetic fiber that can be fabricated as the composite material for the application of high performance product.