Harmonic Analysis and Suppression of High-frequency Welding Devices

This paper analyzes the structure and line current waveform of 3-phase AC voltage regulation circuit. As an application of 3-phase AC voltage regulation circuit, a high-frequency welding device's simulation model and harmonic analysis of line current are presented. Results of simulation are compared to field measurements. The two are in a good agreement, so this simulation model is correct. Two single-tuning filters and one second-order HPF are designed according to the device's harmonic condition. Simulation results of the circuit with filters indicate decrease of the harmonics in current of power supply, and the waveform is close to sinusoidal wave, which prove correctness of the solution to harmonics pollution.     

Analysis of Structure with Tuned Mass Damper under Earthquake

The analysis of vibration response of structure with TMD is carried out under earthquake ,considering the ground-structure interaction. The varying rule of square difference of displacement of structure with the TMD on or off by changing the first inherent frequency is also presented .It has been proved by comparing and analyzing that a TMDstructure with optimum parameters can efficiently reduce the vibration of structure under strong wind and earthquake,when the main frequency of the ground motion is within the range of TMD vibration reducing frequency.     

Research of Stocks Inherent Value and Growth of Listed Company

Appraise the Traditional stocks inherent value models ,and point out their shortcomings.Then a improved stocks inherent value model which emphasize growth of listed Company is set up.The improved model can explain the situation for the times of knowledge economy.Finally, the growth of listed company and is studied a analytic Hierarchy Process model to appraise the growth of listed company is set up.     

Noise and Interference in Two Way CATV

The funneling effect of noise is the main difficulty in two way CATV modification works. This paper discusses the source of noise and interference, the mechanism to form noise funneling, the regularities of distribution, the characteristics of the spectrum, etc. The purpose is to find the way of reducing funnel noise. The invading noise has the greatest effect on the upstream of two way CATV system, which mainly comes from the indoor of the users. The increase of the number of cable modem will not obviously make greater funneling noise. The cable connectors are the main source of producing and invading noise in outdoor cable network, which is a threat to the safty of the whole upstream channel.     

Design on Enterprise Informationization Estimates the Model of Composite Index

This peper commentaried some of our country comparatively well-known enterprise informationization estimate theory,point out,there is existing the question of informationization estimates,that the achievement can't guarantee "appropriate informationization" establishing and enterprise informationization sustainable development,It propose the three-dimensional enterprise informationization estimate the theory and method,that includes information-based level,information-based quality and information-based development potentiality.     

Research on a Novel Inverter of VSC

In order to improve waveform performance of light HVDC system, a lot of switches which operate in high frequency are used, which causes large switching losses and results high cost. A new Buck type voltage source converter(BVSC) is proposed. The new BVSC comprises a dual-buck converter and a three-phase inverter operating in grid frequency. Only two high frequency switches are used, which results good output waveform performance. In order to reduce the high frequency switching losses, a novel improved double-frequency Buck type voltage source converter(DBVSC) is also proposed. An additional dual-Buck converter is added to the BVSC, the added dual-Buck converter deals with the fundamental power that operates in low frequency, and BVSC only deals with harmonic power that operates in high frequency. The output waveform is enhanced and the switching losses are reduced in DBVSC, and the power rating is also increased. The DBVSC is very suitable for large power rating application. The one cycle control theory is adopted to control the proposed DBVSC with analog circuit, which is very simple. The proposed DBVSC and control method are verified by simulation.     

Existing Situation on Disposal of Sludge from Wastewater Treatment Plant in Three-Gorges Reservoir Area

At present 18 wastewater treatment plants operateing in the Small towns of Three Gorge Areas of Chongqing Municipality, producing 132.95 tons surplus sludge everyday. As regards to the disposition of such numerous surplus sludge, the major disposition technique in these wastewater water treatment plants, i. e. , thickening and mechanical dewatering technique followed by feeding into the municipal solid waste landfill, seems to have a rather bad effect on the normal operation of the municipal solid waste landfill, due to the unstabilized sludge resulted from this technique of the sludge disposition and high moisture in the sludge, which is higher than 80%. This paper has paid some attention to this phenomenon. With respect to the small towns having the the municipal solid waste landfill, the techniques of mechanical dewatering, calcareousness stabilized etc. before feeding into the municipal solid waste landfill, seem to be feasible, while the composting and comprehensive utilization of sludge is available in the small towns which have no municipal solid waste landfills.     

Simulation and Experiment of the Forging Process of Railway Lorry Bomsster

Bomsster is a key load-bearing part of railway lorry bogie.Because of its inherent defects casting-steel bomsster could not meet the demands of the heavy load,acceleration and security for lorry.So forging process is proposed to form it.The forming performance of forging-steel bomsster is analyzed.A forging technology is presented which realizes two forging-steel bomsster parts formed in one die.With the plastic forming simulation software DEFORM-3D,the simulation and optimization of the forming process of forging bomsster has been taken based on 3D rigid visco-plastic FEM theory.Optimized scheme has been used to direct the pilot product.The results of product's testing and application suggest that the new forging technology is feasible and the performance of the product is credibility and stabilization.The factory has realized large scale production of a series of forging-steel bomsster.Remarkable benefits of both economy and society have been achieved.     

A Theoretical Analysis of Underpricing in IPOs Based on the Irrational Behavior of Investors

Employing the standpoint of irrational investors in the behavior finance, the authors study the relation on the irrational behavior of medium and small Investors and underpricing of IPO in our country. The paper premises that a revenue-maximizing issuer will be regarded as the target function, and the rational institutional investors can be delegated the task of holding the stocks in the after-market for resale to the irrational medium and small investors--thereby extracting surplus from them, finally the issuer can maximize their expected revenue. We model the process mentioned above and find that the high underpricing of IPO in our country has the direct relation with numerous the irrational medium and small investors existing in our country who cause the underpricing.