Mechanical characterization of clay reinforced polypropylene nanocomposites at high temperature

This paper focuses on the influence of temperature conditions and the clay contents on enhancement of mechanical characterization of polypropylene (PP) nanocomposites. The nanocomposites were prepared using the melt mixing technique in a co-rotating intermeshing twin screw extruder followed by injection moulding. Nanocomposites properties such as impact strength and ultimate tensile strength, yield strength, failure strain, Young’s modulus and toughness are calculated. The addition of clay to PP matrix was showed remarkable enhancement in mechanical properties at the temperature of 25 oC and 120 °C. Nearly 36 % and 160 % increase in the Young’s modulus and about 45 % and 62 % increase in the impact strength were observed at both room temperature (RT) and high temperature (HT), respectively. But, the tensile strength was not affected much. The basal spacing of clay in the composites was measured by X-ray diffraction (XRD). Scanning electron microscopy (SEM) was used to assess the surface morphology of the fractured surfaces and dispersion of the nanoclay.     

Development and characterization of a new marine fish cell line from turbot (<Emphasis Type="Italic">Scophthalmus maximus</Emphasis>)

A new marine fish cell line, TK, derived from turbot (Scophthalmus maximus) kidney, was established by the method of trypsin digestion and subcultured for more than 50 passages over a period of 300 days. The TK cells were maintained in Minimum Essential Medium Eagle (MEM) supplemented with HEPES, antibiotics, fetal bovine serum (FBS), 2-Mercaptoethanol (2-Me), and basic fibroblast growth factor (bFGF). The suitable growth temperature for TK cells was 24°C, and microscopically, TK cells were composed of fibroblast-like cells. Chromosome analysis revealed that the TK cell line has a normal diploid karyotype with 2n = 44. Two fish viruses LCDV-C (lymphocystis disease virus from China) and TRBIV (turbot reddish body iridovirus) were used to determine the virus susceptibility of TK cell line. The TK cell line was found to be susceptible to TRBIV, and the infection was confirmed by cytopathic effect (CPE) and transmission electron microscopy, which detected the viral particles in the cytoplasm of virus-infected cells. Finally, significant green fluorescent signals were observed when the TK cells were transfected with pEGFP-N3 vector, indicating its potential utility for fish virus study and genetic manipulation.     

Effect of triploidization on juvenile African catfish (<Emphasis Type="Italic">Clarias gariepinus</Emphasis>)

Triploid African catfish (Clarias gariepinus) produced through cold shock 3 min post fertilization were compared to diploid offspring of the same parentage at 66 days of age. Triploid fish were significantly shorter (11%) and weighed less (18%) than diploids but showed no significant difference in mortality or cannibalism, which can be an important source of losses under aquaculture conditions. Erythrocytes of triploid fish were more oval shaped than the normal spherical shape of diploid erythrocytes, were significantly larger (38%) and had nuclei that were significantly larger (25%) than observed in diploid fish. Erythrocyte morphological characteristics show potential as an indicator for the detection of triploidy in African catfish.     

Bestandeszuwachs und Leistungsvergleich montan-subalpiner Lärchen-Fichten-Mischbestände

Ohne Zusammenfassung     

Potential use of visible and near-infrared spectroscopy for pine species discrimination by examination of needles

The correct identification of pine species is necessary for proper application of wood in forest?based industries, since the quality of each species’ wood depends on factors intrinsic to the material. The aim of this study was to evaluate the potential use of near?infrared and visible spectroscopy in the discrimination of pine species planted in southern Brazil. Needles of Pinus clausa, P. glabra, P. kesiya, P. oocarpa, P. palustris, P. pseudostrobus, P. rigida, P. roxburghii and P. serotina were collected from experimental plantations located in the region of Rio Negro, Paraná, Brazil. The needles were dried and milled for analysis. The evaluation was performed with a spectral range of 400–750?nm (visible) and 1 000–2 500?nm (near?infrared). Analysis using the visible spectra resulted in two principal components explaining 95% of the variation between the needle samples. In the near?infrared analysis, it was possible to discriminate between all nine pine species studied using only two principal components, where the first explained 99% of the variation between species. Spectroscopy based on needles can be used for pine species discrimination, using the original data without mathematical treatment, in southern Brazil.     

Exploiting the potential of indigenous agroforestry trees: Parkia biglobosa and Vitellaria paradoxa in sub-Saharan Africa

Agroforestry Systems - Parkia biglobosa (néré) and Vitellaria paradoxa (karité) are indigenous tree species that are economically and socially important for local people in...     

Antibacterial activity of seed proteins of Robinia pseudoacacia

A low molecular weight cationic peptide was isolated from Robinia pseudoacacia seed and tested in vitro against seven bacteria (Corynebacterium michiganense, Staphylococcus aureus, Bacillus subtilis, Erwinia carotovora subsp. carotovora, Pseudomonas syringae pv syringae, Xanthomonas campestris pv campestris, and Escherichia coli). The peptide inhibited the growth of the tested strains. The effective concentrations required for 50% inhibition of bacterial growth ranged between 20 and 120 microg ml(-1) protein. S. aureus was found to be the most sensitive strain, however, E. coli was not affected much when compared with others. Reduction of antibacterial activity of the peptide with CaCl2 addition into the growth medium was also observed.     

Carbon and nitrogen dynamics under windrowed residues during the establishment phase of a second-rotation hoop pine plantation in subtropical Australia

The dynamics of carbon (C) and nitrogen (N), derived from the decomposition of windrowed harvest residues, was examined in the establishment phase of a second rotation (2R) hoop pine (Araucaria cunninghamii Aiton ex A. Cunn) plantation in subtropical Queensland, Australia. Following harvesting and site preparation, when residues were formed into windrows, in situ N mineralisation was measured in positions along the three tree-planting rows formed between the windrows. The position above the windrow had a higher nitrification rate than the other positions, averaging about 18 kg N ha⁻¹/month compared with 12 and 9 Kg N ha⁻¹ for the positions between and below the windrow positions, respectively. This position also had consistently greater soil moisture.

Macroplots were formed extending 5 m above and 10 m below a windrow. Windrowed residues within the macroplots were replaced by ¹⁵N-labelled material comprising hoop pine foliage, branch and stem. Hoop pine trees were planted within each macroplot with foliar samples taken at 12 and 24 months. Differences in foliar ¹⁵N enrichment between positions within macroplots were <1‰. Soil samples were taken from positions along the macroplots at 6-monthly intervals. Samples revealed an initial release of labile C and N but soil δ¹⁵N showed that residue-derived N was largely immobilised within the windrows for the 30-month sampling period. Whilst the use of windrows may act as a barrier to the down-slope movement of water, the residue N within the windrows may not be available to the trees of the following rotation for a considerable period following planting. Trees closest to the windrows may be able to introduce roots under the windrows thereby gaining access to the available N, but trees in the central tree planting row are unlikely to derive any significant benefit from the decomposition of windrowed residues.     

Dimensional instability of cement bonded particleboard

This paper examines the dimensional instability of cement bonded particleboard (CBPB) and discusses the behaviour of CBPB during cyclic changes in relative humidities (RH). The results indicated that the changes of CBPB in both mass and dimensions reflected the changes in RH; in a cycle 90–65–35–65–90%RH the change of per percentage change in RH was 1.0:1.3:1.3:2.5 for mass, 1:2:2:1 for length and 1.3:1.1:1.0:1.0 for thickness. The changes were closely related to the structure of CBPB and the nature of the cement paste and wood chips. Thickness change was double that of the length change between 65 and 35%RH and triple that between 65 and 90%RH. The rate of change in mass was much higher than that in dimensions. The hysteresis loops were dissimilar to those of other wood and wood-based materials, with the loops of mass change closed between 65 and 90%RH, while the loops for dimensional changes were open. A set of the former loops moved upward and the latter moved downward with increasing number of cycles, corresponding to an accumulated increase in mass, but decrease in dimensions. The models developed for CBPB under constant and a single changing RH were successfully applied to changes under cyclic RH.The sorption behaviour and dimensional movement of CBPB has been shown to be influenced not only by RH, but also by its intermediate history, with the maximum values for change within every phase of sorption, in both mass and dimensions, being higher for the cycling between 35–90%RH than the cycling regime 35–65–90%RH. The ratios of dimensional changes to mass change of CBPB were greater under the latter regime than under the former regime.The senior author wishes to thank Professor W.B. Banks of University of Wales, Bangor for his constructive discussions and assistance and the British Council for partly financial support.