Surface deterioration of wood-flour polypropylene composites by weathering trials

The market for wood-fiber plastic composites (WPCs) is expanding rapidly in many countries including Japan, where WPCs are mainly used for exterior products. In such applications, WPCs undergo undesirable color change, chalking, and shrinkage and swelling, and accordingly there is a need to better understand the mechanisms responsible for the weathering of WPC and develop methods of improving their weathering resistance. In this study, weatherability of WPC was assessed by natural and accelerated weathering trials. Discoloration (whitening) of WPC during exposure was caused by degradation of both wood and plastic. Darker color pigments as additives improved the color stability of WPC; however, chalking on the surfaces still occurred. The color stability of WPC was improved by application of exterior coatings. Preweathering of WPC (before coatings were applied) increased the absorption of coatings by the WPC and had a positive effect on the color stability and prevented chalking of the composites. Parts of this study were presented at the IUFRO XXII World Congress Meeting, Brisbane, August 2005 and the IAWPS 2005, Yokohama, November 2005     

Comparative effectiveness of two alkylammonium compounds as wood preservatives

This study describes a laboratory evaluation of the efficacy of two alkylammonium compounds [didecyldimethylammonium tetrafluoroborate (DBF) and didecyldimethylammonium chloride (DDAC)] when applied via vacuum impregnation or superficial treatment. Treated wood specimens were tested for their termite and microbial resistance under controlled laboratory conditions. The higher chemical retentions were needed to suppress the feeding by Coptotermes formosanus ≦3% mass loss in the multichoice test than in the no-choice test. The DBF and DDAC retention levels necessary to meet the performance requirement ≦3% mass loss after 12-week fungal exposure varied with wood species. The retention level of 3 kg/m³ for DBF and DDAC was generally high to keep the nondurable wood species free of decay. Although there was no difference between DBF and DDAC in the efficacy against decay and termite attack, the former slightly outperformed the latter as an antimold and antisapstain agent.     

Mechanical behavior of the crystal lattice of natural cellulose in wood under repeated uniaxial tension stress in the fiber direction

This study investigated the relationship between the cellulose crystal lattice strain (crystalline region) and the macroscopic surface strain in specimens of Chamaecyparis obtusa wood under repeated uniaxial tension stress in the fiber direction. Changes in the strain of the crystal lattice were measured from the peak of (004) reflection using the transit X-ray method. The macroscopic surface strain of each specimen was measured with a strain gauge. In both loading and unloading, the surface strain changed linearly with changes in stress. However, crystal lattice strain was not linear but exhibited changes along a curve with changing stress. Under stressed conditions, the crystal lattice strain was always less than the surface strain, regardless of the frequency of repetition in the loading and unloading cycle. The ratio of the crystal lattice strain to the surface strain showed a negative correlation for stress in both loading and unloading. That is, the ratio decreased with increasing stress, and finally tend to converge to a specific value. The ratio (I/I ₀) between the diffracted intensity (I ₀) in the (004) plane in the unloaded condition and the diffracted intensity (I) in the (004) plane in the loaded condition tend to converge on a specific value with increasing frequency of repetition. When the substantial tension Young’s modulus of the wood in the longitudinal direction decreased, the ratio of the strain of the crystal lattice to the surface strain also decreased. Moreover, the ratio decreased with increasing microfibril angle of the specimen.     

Predicting individual stem volumes of sugi (Cryptomeria japonica D. Don) plantations in mountainous areas using small-footprint airborne LiDAR

This study investigated which predictor variables with respect to crown properties, derived from small-footprint airborne light detection and ranging (LiDAR) data, together with LiDAR-derived tree height, could be useful in regression models to predict individual stem volumes. Comparisons were also made of the sum of predicted stem volumes for LiDAR-detected trees using the best regression model with field-measured total stem volumes for all trees within stands. The study area was a 48-year-old sugi (Cryptomeria japonica D. Don) plantation in mountainous forest. The topographies of the three stands with different stand characteristics analyzed in this study were steep slope (mean slope ± SD; 37.6° ± 5.8°), gentle slope (15.6° ± 3.7°), and gentle yet rough terrain (16.8° ± 7.8°). In the regression analysis, field-measured stem volumes were regressed against each of the six LiDAR-derived predictor variables with respect to crown properties, such as crown area, volume, and form, together with LiDAR-derived tree height. The model with sunny crown mantle volume (SCV) had the smallest standard error of the estimate obtained from the regression model in each stand. The standard errors (m³) were 0.144, 0.171, and 0.181, corresponding to 23.9%, 21.0%, and 20.6% of the average field-measured stem volume for detected trees in each of these stands, respectively. Furthermore, the sum of the individual stem volumes, predicted by regression models with SCV for the detected trees, occupied 83%–91% of field-measured total stem volumes within each stand, although 69%–86% of the total number of trees were correctly detected by a segmentation procedure using LiDAR data.     

Lignin fragments rich in detached side-chain structures found in water-soluble LCC

The content of the glyceraldehyde-2-aryl ether-type structure in water-soluble lignin–carbohydrate complex (LCC) fractions, which were obtained from Japanese cedar and birch residual wood meal after milled wood lignin isolation, was determined by ozonation. Quite high amounts of the glyceraldehyde-2-aryl ether-type structure were found in water-soluble LCC fractions of both species; about 3–5 times higher than those of other fractions. This result, as well as the high content of the β-1 structure in these fractions shown in our previous reports, suggest that lignin in these fractions has the characteristics of endwise-type lignin, because the glyceraldehyde-2-aryl ether-type structure and β-1 structure are typical characteristics of this type of lignin fraction. These results are in good agreement with the generally accepted hypothesis that the glyceraldehyde-2-aryl ether-type structure and β-1 structure are generated at the same time by a radical coupling reaction. The results also indicated that these two structures are present in close proximity in the lignin.     

Screening method for wood extractives: direct cellulose thin-layer chromatography plate

A method for screening wood extractives was developed using cellulose thin-layer chromatography plate (Cell-TLC) separation and was directly applied to bioassays. Wood meal (60 mesh) from nangka (Artocarpus heterophyllus Lamk) heartwood was extracted with hot methanol. The crude extract was separated using a Cell-TLC plate (50 × 50mm). Two broad bands with R_f values of 0.46 and 0.96 were found, and the bands showed completely different effects against the pest termite Coptotermes formosanus Shiraki and the decay fungus Fomitopsis palustris. The band with R_f 0.46 was preferentially consumed by workers of C. formosanus, and it did not show any growth inhibition against F. palustris when the Cell-TLC plate was directly exposed to the organism. In contrast, the band with R_f 0.96 appeared to repel strongly the feeding by C. formosanus and inhibited the growth of F. palustris. It was concluded that the Cell-TLC system was applicable for screening wood extracts consisting of many compounds.     

Effects of thinning on wind damage in Pinus thunbergii plantation ——Based on theoretlcal derlvation of risk—ratios for assessing wind damage

Based on paper of “Theoretical derivation of risk-ratios for assessing wind damage in coastal forest“,wind damage in the pine coasteal forest,which was thinned at four levels in December of 1997,was investigated for four successive growing seasons.Besides wind damage,the wind profiles outside and inside the coastal forest stand and the distributions of optical stratification porosity (OSP) were also observed.Based on these data,risk-ratios of wind damage for both individual trees and stands were estimated according to the methods developed in “Theoretical derivation of risk-ratios for assessing wind damage in a coastal forest“.The results showed that risk-ratios of wind damage,which were calculated from the meen height and diameter only and from the combination of wind and stand sructure profiles,accurately predicted wind damage in the plantation.Relationships between different thinning ratios and incidence of wind damage showed that stand stability decreased soon after the thinning.This was due to the immediate effects of thinning on increasing the canopy roughness and wind load,and on decreasing the sheltering effects from surrounding trees.However,thinning strategies could improve the stability by long-term effects on growthand development of trees against extreme wind.Only canopy damage was recorded during the experimental period,no stem damage was found,even though the maximum 10-min wind speed outside the coastal forest attained 30.2m s^-1.The results obtained in this study indicate that thinning is the most effective silvicultural strategy available for managing coastal forest despite the increased probability of wind damage soon after thinning.     

Continuum contraction of tension wood fiber induced by repetitive hygrothermal treatment

Wood Science and Technology - Tension wood, when kiln-dried, is likely to deform hugely, which is probably caused by a gelatinous layer of the gelatinous fiber. To elucidate the mechanism behind...