Mycoplasma iowae species-specific DNA probe

A Mycoplasma iowae (MI) species-specific DNA probe (designated pMI-2) of 6.0 kbp (kilobase pairs) was isolated from an MI strain I-695 genomic library prepared in plasmid pUC8 and Escherichia coli strain JM83. When labeled with [32]P by nick translation, the probe hybridized in dot blot assays with 6 reference strains and 8 field isolates of MI but not with 16 other known species of avian mycoplasmas. The pMI-2 probe detected a minimum of 1.5 ng of MI strain I-695 chromosomal DNA. Under identical conditions of hybridization, the probe did not hybridize with a high concentration (200 ng) of M. gallisepticum or M. synoviae chromosomal DNA.     

Response of gas exchange rates in <Emphasis Type="Italic">Abies firma</Emphasis> seedlings to various additional stresses under chronic acid fog stress

In order to clarify the chronic influence of acid fog on the gas exchange rates of momi fir (Abies firma Sieb. et Zucc.) trees, we exposed them to simulated acid fog (pH 3) for 3 years. The composition of the acid fog was similar to that observed in a region where momi fir trees have been declining, and it contained organic acids. We then treated the firs with various additional stresses, such as drought, low temperature, fine root cutting, ozone exposure, soil acidification, nitrogen load, and rhizosphere aluminum stress. Under chronic exposure to acid fog, the momi fir seedlings exhibited a pattern of stomatal behavior whereby they excessively opened in summer and closed in winter. Furthermore, the stomata of these seedlings tended to open during drought stress, and their needles were visibly injured after ozone exposure. The net photosynthesis rates of the seedlings exposed to acid fog were regulated by their stomatal aperture, rather than directly by acid fog. These results suggest that acid fog exposure disturbs the control of stomatal function in the momi fir seedlings. In addition, we found that chronic acid fog exposure suppressed the decrease in net photosynthesis rate, due to its nitrogen load.     

Stand structure and the regeneration ofChamaecyparis pisifera (Sieb. et Zucc.) Endl. on sites with different soil development in an old-growth coniferous forest, central Japan

Stand structure and the regeneration ofChamaecyparis pisifera on sites with and without well-developed soil in an old-growth coniferous forest, Akasawa Forest Reserve, central Japan, were investigated, along with their relationships to other important coniferous species. Of stems ofC. pisifera≥5 cm diameter at breast height, stems with intermediate size were absent in stands on the developed-soil site, while those with smaller size increased in stands on the undeveloped-soil site, which supported a higher density ofC. pisifera. In the stands without recent tree-fall of canopy stems on the developed-soil site, canopy stems ofC. pisifera were distributed uniformly and the understory stems, patchily. On the other hand, both canopy and understory stems ofC. pisifera in stands on the undeveloped-soil site were distributed patchily. In the understory,C. pisifera occurred as clonal patches formed by vegetative reproduction on various types of microsites including bare rocks. However, the clonal patches did not occur in a stand on the developed-soil site with dense saplings of an evergreen conifer,Thujopsis dolabrata, which can expand vegetatively with a well developed soil layer. Gap formation may induceC. pisifera to develop tree-form stems from shrubby clonal patches. On developed-soil sites,C. pisifera stands that survive a long disturbance-free period on this site need catastrophic disturbance for their regeneration, which will eliminateT. dolabrata in the understory and create bare soil for colonization ofC. pisifera from seeds. On undeveloped-soil sites,C. pisifera replaces itself continuously by effective vegetative reproduction. Ground instability and the wet condition of this site may promote the replacement.     

Semi-quantitative method to evaluate the α-carbonyl content in lignin

A method to estimate the content of -carbonyl structures in lignin was developed. This method consists of two successive treatments: NaBD₄ treatment of pulp to reduce an -carbonyl structure in lignin, and nitrobenzene oxidation. NaBD₄ was used to convert an -carbonyl structure to a deuterium-labeled hydroxymethine structure. The ratio of D-vanillin [(HO)(H₃CO)C₆H₃CDO] to H-vanillin [(HO)(H₃CO)C₆H₃CHO] or that of their syringyl analogues obtained by nitrobenzene oxidation was used as the measure of the content of -carbonyl structure. Model experiments demonstrated that when sodium hydroxide was used as alkali for the nitrobenzene oxidation, the retention of deuterium at the side chain -position was very low due to the displacement of deuterium with hydrogen by an unknown reaction mechanism. In order to depress this unexpected displacement, the reaction conditions of the nitrobenzene oxidation were modified. The modified nitrobenzene oxidation employs 0.5mol/l of lithium hydroxide as a reaction medium instead of 2.0mol/l sodium hydroxide. By this modification, this method could successfully trace the formation and the degradation of the -carbonyl structure in milled wood lignins.This paper was presented in part at the 11th International Symposium on Wood and Pulping Chemistry, Nice, France, June 2001 and at the 46th Lignin Symposium, Kyoto, Japan, November 2001     

Feeding activities of Coptotermes formosanus Shiraki and Reticulitermes speratus (Kolbe) as affected by moisture content of wood

The relationship between the moisture content (MC) of wood blocks and the feeding activities of two Japanese subterranean termites, Coptotermes formosanus Shiraki and Reticulitermes speratus (Kolbe), was investigated with two choice tests. When three wood blocks with low MC (6%–12%), middle MC (79%–103%), and high MC (140%–182%) were exposed to workers of C. formosanus and R. speratus in a choice test, the feeding preferences were found in the middle MC blocks for C. formosanus, and the middle and high MC blocks for R. speratus, although wood blocks of low MC were also attacked. In a second choice test, wood blocks consisting of five pieces with water-impregnated (MC: 133%–191%) top, middle, or bottom piece were exposed to workers of both species. Higher consumptions were generally obtained in water-impregnated wood pieces and bottom pieces.     

Initial shapes of stress-strain curve of wood specimen subjected to repeated combined compression and vibration stresses and the piezoelectric behavior

This study investigated the relationship between the initial shape of the stress (σ)-strain (ε) curve of a Chamaecyparis obtusa wood specimen subjected to repeated combined compression and vibration stresses at various angles between the fiber direction and load direction and the piezoelectric behavior. The main findings of the study are: (1) the σ-ε curve became convex initially, and then the stress was proportional to the strain. The σ-ε curve had almost the same shape during both loading and unloading. (2) The σ-piezoelectric voltage (P) curve was nonlinear, with a maximal point or cusp on the curve, which had almost the same shape during both loading and unloading, as was also observed for the σ-ε curve. (3) The plot of the first derivative of the stress [dσ/dε (= σ′)] against ε was nonlinear. The σ′-ε and P-ε curves at various angles were fairly similar. (4) The stress at the maximal point (or cusp) of the σ-P curve decreased with an increase in the angle between the fiber direction and load direction. The tendency of the stresses was very similar to that of Young’s modulus and compression strength calculated from Hook’s law and Hankinson’s law, respectively.     

The influences of boiling and drying treatments on the behaviors of tension wood with gelatinous layers in <Emphasis Type="Italic">Zelkova serrata</Emphasis>

This study examined how boiling and drying treatments influenced various physical properties of the tension wood with gelatinous fibers (G-fibers) of a 29-yearold Zelkova branch. By boiling treatment, tension wood with numerous G-fibers contracted considerably in the longitudinal direction and the longitudinal Young’s modulus decreased in spite of the water-saturated condition. The drying treatment caused green tension wood and boiled tension wood with numerous G-fibers to shrink longitudinally and increased their longitudinal Young’s moduli. These specific behaviors in tension wood were highly correlated with the proportion of G-fibers in a specimen and were probably caused by the microscopic behavior of cellulose microfibril (CMF) in the gelatinous layers (G-layers). The longitudinal shrinkage of tension wood due to drying suggests the existence of a hygro-sensible, noncrystalline region in the CMF, which is abundant in the G-layer. Furthermore, the noncrystalline region in the CMF softens during boiling treatment, resulting in the reduction of the longitudinal Young’s modulus in tension wood. The longitudinal contraction of tension wood with G-fibers by boiling might be caused by the tensile growth stress remaining in green G-layers. However, no changes were detected in the 004 d-spacing of cellulose crystal in tension wood from the boiling and drying treatments, regardless of the proportion of G-fibers.     

The effect of compression and incision on wood veneer and plywood physical and mechanical properties

ABSTRACT

Drying takes the largest share of energy in plywood production, and varying moisture content of veneers necessitates re-drying that often leads to over-dry veneers with deactivated surfaces, which may promote imperfect bonding. In order to decrease the drying time, reduce the need for re-drying of veneers, and improve the quality of plywood, birch and spruce veneers were subjected to pre-treatment by cold compression, incision, or a combination of the two. The effects of pre-treatment on the veneer and plywood quality were assessed by standard tests. Compression had a beneficial effect on water removal of the wettest veneers (spruce sapwood (SW) and birch), but some thickness reduction was observed in the veneers as well as the finished birch plywood. Compression led to thickness reduction of spruce veneers, but had no effect on SW plywood thickness likely due to higher viscoelasticity. Both compression and the combination of incising and compression levelled the moisture variation within the compressed stacks. Incision improved the modulus of elasticity of birch plywood, shear strength of SW plywood, and both bending and shear strengths of heartwood plywood. Higher surface pressure decreased the drying time of spruce SW in both plain compression and combined incision and compression pre-treatment.     

Salt distribution in response to optical stratification porosity and relative windspeed in a coastal forest in Niigata, Japan

Wind velocity, vertical stand structure and seasalt distribution were measured at various heights inside a plantation of coastal pine forest, with thinning and unthinning, to assess whether any relationships exist between the wind profile, stand structure and seasalt distribution in the coastal pine forest. The vertical stand structure, i.e., optical stratification porosity (OSP), which is defined as vertical distribution of the proportion of sky hemisphere not obscured by tree elements inside a forest stand, was determined for each height by computer analysis of digital images taken with a hemispherical lens. The distribution of OSP in the coastal forest follows the Lambert-Beer's law with absorbency coefficient (). The relative windspeed within canopy can be described using the exponential form with the attenuation coefficient (). The sea-salt was collected using salt gauze (a surgical dressing of loosely woven cotton) both inside and outside the coastal forest, and the distribution of sea-salt within canopy was also in accordance with an exponential function. The relationships among windspeed, OSP and sea-salt indicate that the distributions of both sea-salt and windspeed within canopy were very closely correlated with the distribution of OSP. A linear relationship between OSP and sea-salt has been found. Additionally, linear regression between coefficients and has been obtained as well. Based on these relationships between OSP, wind and sea-salt in the coastal forest, the sea-salt distribution and wind profile within the canopy of the coastal forest can be predicted according to OSP. These results may therefore be useful in analyzing the effects of sea-salt on vegetation and evaluating the filter functions of coastal forests.This revised version was published online in November 2005 with corrections to the Cover Date.