Effect of hair damage on the colour uptake of an oxidizing semi-permanent colorant

Further our previous study on the hair damages, this paper investigated the effect of three different hair damaging treatments on the coloration effect with an oxidizing semi-permanent colorant. The three damaging treatments are (i) sunlight (simulated by Xenon light), (ii) perming, and (iii) bleaching. The colour uptake was evaluated differently with conventional method by CIE L*a*b* system of equation. In addition, the colour fastness properties of colored hairs to different simulated daily treatment such as (i) hair washing, (ii) hair perming, (iii) sunlight exposure, and (iv) swimming in the sea were also examined. Based on the experimental results, It could be concluded that the hair treatment with bleaching could improve the colouring performance because of the elimination of melanin from hair. Meanwhile, the colour fastness properties of the colored hair under different colour fastness testing conditions were getting worse with respect to the increasing degree of damaging treatment.     

Improving wrinkle resistance of cotton fabric by montmorillonite

Cotton fabric was treated with montmorillonite (MMT) so as to evaluate its effectiveness on improving its wrinkle resistance. The MMT in emulsion form was applied to cotton fabric by padding and finally the wrinkle resistance of the MMT-treated cotton fabric was improved. Furthermore, instrumental methods were used for studying the presence of MMT particles on the cotton fabric surface. It was noted that nano-scale MMT particles adhered on the fiber surface and the particle size played an important role in influencing the wrinkle resistance of the cotton fabric. The experimental results are discussed thoroughly in this paper.     

Optimization of electroless nickel plating on polyester fabric

Electrical conductivity is an important property of electroless nickel plated fabric. The optimized electroless nickel plating method can provide useful information for textile industries to obtain optimum surface resistance and stable plating. In this study, a screening experiment with factorial design and response surface method (RSM) with central composite design (CCD) was used to optimize the electroless nickel plating on polyester fabric. A two-level full factorial design (FFD) was used to determine the effects of five factors, i.e. the concentrations of nickel sulfate, sodium hypophosphite and sodium citrate, pH and temperature of the plating solution on surface resistance of the electroless nickel plated fabric. It is found that the nickel sulfate concentration and temperature of the plating solution are the most significant variables affecting the surface resistance of electroless nickel plated fabric. The optimum operating condition is finally obtained by using a desirability function. The test for reliability for predicting response surface equations shows that these equations give an excellent fitting to the observed values. In addition, the deposit composition, surface morphology, crystal structure and electromagnetic interference (EMI) shielding effectiveness (SE) were studied. The EMI SE of the nickel plated polyester fabric obtained under the optimal condition is about 60 dB at the frequency ranging from 2 to 18 GHz.     

Fabric objective measurement of the plasma-treated cotton fabric subjected to wrinkle-resistant finishing with BTCA and TiO<Subscript>2</Subscript> system

Handle is an important factor when designing the end-uses of fabric as it is also a critical factor for purchasing decision. In the present study, the Kawabata Evaluation System for Fabrics (KES-F) was used for measuring the fabric handle of BTCA-TiO₂ treated cotton fabric with or without plasma pre-treatment. The results revealed that the BTCA-TiO₂ treated cotton fabrics without plasma pre-treatment had a negative effect on tensile, shearing, compressional, and surface properties while the bending properties were improved. On the other hand, the plasma pre-treatment improved the tensile and compressional properties, but not the bending, shearing, and surface properties.     

A study of the oxygen plasma treatment on the serviceability of a wool fabric

Low temperature plasma (LTP) treatment using oxygen gas was applied to a wool fabric. The LTP treated wool fabric was tested with several methods: ASTM D5035-1995, ASTM D1424-1996, AATCC Test Method 99-2000, AATCC Test Method 61-2001 1A, AATCC Test Method 15-2002 and AATCC Test Method 8-2001 and the results were compared with the industrial requirements (ASTM D3780-02 and ASTM D4155-01). The results revealed that the LTP treated wool fabric could fulfil the industrial requirements. The results of the investigation were discussed thoroughly in this paper.     

Phenotypic variation in Nordic populations of Phytophthora infestans in 2003

A total of 743 single-lesion isolates of Phytophthora infestans were collected in summer 2003 from Denmark, Finland, Norway and Sweden. Most of the isolates were tested for mating type, and subsets were tested for sensitivity to fungicides and virulence (host specific pathogenicity). Approximately 60% of the isolates were A1 mating type in each country. Both mating types were present in 40% of the fields where more than one isolate was tested, indicating strong potential for sexual reproduction. The proportion of metalaxyl-resistant isolates dropped to under 15% from the 60% observed in the early 1990s in Norway and Finland, possibly due to lower selection pressure because of decreased use of metalaxyl. Propamocarb-HCl sensitivity remained unchanged in the Nordic countries compared to the situation in 1997–2000 in Finland. Four isolates collected from Finland and Sweden were able to sporulate in the presence of this fungicide at a concentration of 1000 mg L⁻¹. In Norway and Finland the frequencies of virulence factors and pathotypes remained nearly unchanged since the 1990s, but the mean number of virulence factors per isolate increased from 5·6 to 6·3. In Denmark and Sweden virulence factors 2 and especially 6 were more common than in Norway and Finland. In addition, in the Swedish population the frequencies of pathotypes were quite even while in other countries pathotype 1,3,4,7,10,11 was most prevalent.     

Mating type distribution and genetic structure are consistent with sexual recombination in the Swedish population of Phaeosphaeria nodorum

Mating type ratios and SSR marker analysis were used to study the genetic structure of Phaeosphaeria nodorum , the causal agent of glume blotch in wheat. The study was based on leaf collections in five fields located in different regions in Sweden. In total 302 isolates of P. nodorum were obtained from 203 sampling sites (including eight ascospore isolates). Three strong indications of sexual recombination were found: (i) the two mating types were present at a 1:1 ratio; (ii) the genetic structure was diverse, with many unique genotypes, and 69 of the 93 genotypes were only found once; and (iii) random association of alleles indicated that genetic recombination was frequent. However, asexual reproduction could not be excluded since identical genotypes were found within the fields. The fungal population had experienced a demographic bottleneck, as indicated by a low ratio of number of alleles to microsatellite size range ( M -value) of 0·5.     

棉苗黑斑病的发生条件及其防治途径

棉苗黑斑病的致病菌在关中棉区初步认为是 Alternaria tenuis Nees 与棉成株期叶片上的致病菌不同。病菌孢子借气流传布。种子带菌率虽然很高,但诱发苗病率却很低,因此,种子消毒或采用轮栽来控制这个病害,是不能达到预期效果的。病害发生与棉苗受冻、强风对棉苗的伤害以及棉苗阶段发育有密切的关系。各年发病期有早有晚,但以真叶出现时为易感阶段。本文阐述了棉苗生育阶段、气候条件与发病的关系,为预测病害发生的物候与气象参考条件提供了资料。棉株伤害与发病有关系,建议在生产上适当降低播种量,提高播种质量,适期早疏苗、早间苗;以减轻由于伤损而导致病害侵染。品种与病害发生的关系不显著。试验证明,使用波尔多液加1059于降温前喷射效果较好。