新疆‘晚丰’巴旦木花粉萌发培养基组分的筛选

为提高人工授粉中巴旦木的产量,本研究采用花粉离体培养法,筛选新疆‘晚丰’巴旦木品种花粉萌发中不同培养基组分的配方施用量,研究不同培养基配方组分对花粉萌发的影响。实验中在培养基内添加尿素、硼酸、氯化钙、吲哚乙酸、赤霉素和蔗糖,均能促进花粉萌发和花粉管生长,在一定范围内,花粉萌发率和花粉管长度均随培养基配方组份量的增加而增加,但超过一定添加量时,促进作用逐渐减弱并出现抑制作用。研究结果显示:添加0.1%尿素、0.01%硼酸、0.005%氯化钙、0.0001%吲哚乙酸、0.0015%赤霉素和10%蔗糖时,新疆‘晚丰’巴旦木品种花粉萌发率最高,花粉管长度也达到最大值。本研究结果为实践生产中人工授粉和相关研究提供参考和理论依据,也为进一步顺利进行亲和授粉研究提供前期理论基础。     

Transient heat transfer characteristics of air-array-jet impingement with different nozzle arrangements on high-temperature flat plate in small jet-to-plate distance

Numerical studies on transient heat transfer characteristics of air-array-jet impingement with a small jet-to-plate distance and a large temperature difference between nozzles and plate were presented.The dimensionless jet-to-plate distance(H/D)was 0.2,and non-dimensional nozzle-to-nozzle spacing(S/D)was 3,4,5 and 6,respectively.It is found that the quenching time is shortened at a constant total mass flow at air jet inlet m·(m·=218.21 kg/h),and the heat transfer uniformity is deterio-rated as S/D increases.However,the adding reversed-flow nozzles can shorten the quenching time of the glass plate considerably with a modest change in the heat transfer uniformity.The results at variable m·are the same as those at a fixed m·.Furthermore,the parity and arrangement of nozzles are also discussed,It is found that an odd number of nozzles is more beneficial for transient heat transfer.Based on these results,an appropriate proposal for ultra-thin glass tempering process is presented.     

扬州北500 kV变电站选址的技术和经济论证

变电站选址是电网规划的关键工作环节,其选址的合理性直接影响到电网的线路走径,网络结构等问问题,对整个电网的安全可靠性和经济效益起着决定性的作用,变电站选址必须进行广泛的资料收集和深入细致的调查研究。文章研究以扬州北500 kV变电站规划选所为例,深度挖掘影响变电站规划选所的影响因素,进行不同方案的经济性比较分析,为选择最为合适的场址方案提供理论和技术支持。     

Rural land reforms and villagers' preferences for urban settlement: A case study of Shandong Province,China

Based on surveys conducted in Shandong Province, China, this paper examined the interests of rural residents to move to and settle in cities, as well as the factors that motivate or discourage their potential settlement changes. Results of the binary logistic regression analysis showed that villagers' urban settlement preference was related to sociodemographic factors such as gender, age, and occupation. Overall, the separation of the “three rights” (collective ownership, land contract right, and land use right) associated with rural land has strengthened the urban settlement preference of rural residents. Nevertheless, we did not find significant association between land transfer and the preference for urban settlement. For villagers who expressed interest in urban settlement, better job opportunities, education opportunities, and higher income are the leading “pull” factors that would attract them to cities. The attachment to rural life, high living costs, and high housing prices in cities were the top concerns for villagers who did not want to move. The study also found that villagers' desired urban destinations changed with the changing land parameters, indicating that the outcomes of China's rural land reforms may not be aligned well with the policy goals laid in the country's urbanization and rural development plans.     

晋中盆地典型耕地厚度、土壤养分空间变异

旨在探究旱作区耕地土壤耕层厚度及土壤养分空间格局与变异规律。以晋中盆地典型耕地土壤为研究对象,运用地统计学方法对耕地耕层厚度及土壤养分的空间变异进行分析,土壤养分选取有机质、pH、有效磷、缓效钾4个指标。结果表明：（1）各个指标的空间自相关性都是随着距离的增加而减小;（2）有效磷的半变异函数最优模型为高斯模型,其他指标的最优模型均为指数模型。各指标的块金系数由大到小依次为：有机质>有效磷>pH>耕层厚度>缓效钾;（3）耕层厚度、有效磷均为西北高东南低的空间格局,缓效钾为东北高西南低,有机质为西南高东北低,pH除北洸乡偏低外均偏高。地统计方法能良好地描述土壤性质的空间分布和变异特征,各土壤性质的空间变异过程中随机性与结构性并存,并且随机性均小于50%。     

Quantitative trait loci mapping for yield-related traits under low and high planting densities in maize (Zea mays)

Average maize yield per hectare has increased significantly because of the improvement in high-density tolerance, but little attention has been paid to the genetic mechanism of grain yield response to high planting density. Here, we used a population of 301 recombinant inbred lines (RILs) derived from the cross YE478 × 08–641 to detect quantitative trait loci (QTLs) for 16 yield-related traits under two planting densities (57,000 and 114,000 plants per ha) across four environments. These yield-related traits responded differently to high-density stress. A total of 110 QTLs were observed for these traits: 33 QTLs only under low planting density, 50 QTLs under high planting density and 27 QTLs across both densities. Only two major QTLs, qCD6 and qWKEL2-2, were identified across low- and high-density treatments. Seven environmentally stable QTLs were also observed containing qED6, qWKEL3, qRN3-3, qRN7-2, qRN9-2 and qRN10 across both densities, as well as qRN9-1 under low density. In addition, 16 and eight pairs of loci with epistasis interaction (EPI) were detected under low and high planting densities, respectively. Additionally, nine and 17 loci showed QTL × environment interaction (QEI) under low- and high-density conditions, respectively. These interactions are of lesser importance than the main QTL effects. We also observed 26 pleiotropic QTL clusters, and the hotspot region 3.08 concentrated nine QTLs, suggesting its great importance for maize yield. These findings suggested that multiple minor QTLs, loci with EPI and QEI, pleiotropy and the complex network of “crosstalk” among them for yield-related traits were greatly influenced by plant density, which increases our understanding of the genetic mechanism of yield-related traits for high-density tolerance.     

基于高通量测序的露地菊(Chysanthemum×grandiflora)盐胁迫转录组分析

为揭示露地菊生长发育及耐盐胁迫的应答机制和分子基础,本研究以盐胁迫处理的露地菊及其对照为材料,使用Illumina Hiseq2500高通量测序平台对转录组进行测序,分别获得了60370448和71415448条Clean reads,通过序列拼接组装得到45591条Unigene,平均长度724 bp。有37675条Unigene在七大数据库(COG,GO,KEGG,KOG,Pfam,Swiss-Prot,NR)中得到注释。通过比对露地菊盐胁迫处理组和对照组样品间Unigene的表达量及在各数据库中的注释情况,统计得到:有4143条差异表达基因获得注释;有2441条差异表达基因在GO数据库中获得功能注释;注释到COG数据库中的2281条差异表达基因依据功能可分为25类;有1062条差异基因映射到KEGGPathway数据库中,涉及了199个代谢通路,包括核糖体途径、植物激素信号传导途径、淀粉蔗糖代谢、碳代谢、氨基酸的生物合成等。本研究获得的转录组数据将有助于揭示露地菊生长发育及耐盐胁迫的应答机制和分子基础,及相关抗性基因的挖掘和分子辅助育种等方面的研究。     

基于SSR分子标记的闽楠(Phoebe bournei)核心种质的构建

为更好地发掘和利用现有闽楠种质资源,本研究利用7个SSR位点对江西和福建16个闽楠群体的237份材料进行基因型分析,采用逐步聚类(随机取样策略,位点优先取样策略)和模拟退火算法(等位基因数目最大化策略,遗传距离最大化策略)4种取样方法构建闽楠核心种质,并将各遗传多样性指标进行分析。结果表明:7个SSR位点共检测到50个等位基因,平均为7.143,平均有效等位基因为2.115,Shannon信息指数为0.778,观测杂合度为0.302,期望杂合度为0.442。基于逐步聚类方法构建的核心种质相较于基于模拟退火算法构建的核心种质各遗传参数指标都相对较高。对其进行t检验后,选择以基于逐步聚类位点优先取样策略在25%的取样比例下选取的种质为核心种质,其等位基因数、平均有效等位基因数、多态性位点百分率、Shannon多样性指数的保留率分别为初始种质的98%、104.92%、90.09%、97.94%。筛选出的59份核心种质材料能够较好地代表闽楠种质资源的遗传多样性,为闽楠的种质资源保存提供科学依据。