Changes in platelet life span in dogs with mitral valve regurgitation

Platelet life span was measured in dogs with experimentally-induced mitral regurgitation (MR) by using an in vitro whole-blood biotinylation technique to evaluate the effects of shear stress induced by MR. Mitral regurgitation was created in healthy dogs by ablation of the mitral valve chordae tendineae. Mitral regurgitation was identified by auscultation and postoperative color Doppler echocardiography. Platelets were biotinylated. and derivatized blood was reinfused into the dogs. Biotinylated platelet disappearance was measured over time to determine platelet life span. Pre- and postablation platelet life span was compared in each dog. Platelet life span was shorter in dogs with experimentally induced MR. Shear stress from MR was postulated to shorten platelet life span. Alternations in platelet function and life span may contribute to the progression of cardiovascular disease in dogs with MR. Further studies are required to determine if platelet dysfunction is related to disease progression in these patients.     

Application of time-resolved fluorometry to immunoassays for bovine reproductive hormones

The principle of time‐resolved fluorometry with lanthanide chelates was established in the 1980s, but in the field of animal sciences it has not been widely applied to immunoassays. However, immunoassays that utilize time‐resolved fluorometry are possible alternatives to radioimmunoassays, since they can attain high sensitivity without safety risks. In this short review, we introduce the development of time‐resolved immunoassays for inhibin A, inhibin B and follicle‐stimulating hormone (FSH), and describe their application to the investigation of FSH regulation in male and female cattle. The results obtained using these newly developed immunoassays indicate that inhibin A acts as a feedback regulator for FSH secretion in female cattle, whereas inhibin A, and probably inhibin B, do so in male cattle.     

Guided bone regeneration with beta-tricalcium phosphate and poly L-lactide-co-glycolide-co-epsilon-caprolactone membrane in partial defects of canine humerus

This study was performed to evaluate the effect of beta-tricalcium phosphate and poly L-lactide-co-glycolide-co-epsilon-caprolactone (TCP/PLGC) membrane in the repair of partial bone defects in canine proximal humerus. Three adult mixed-breed dogs were used during the experimental period. The length of the defect was quarter of the full length of humerus, and width of the defect was quarter of middle diameter of the lateral aspect of humerus. The humeri of each dog were divided into treatment (TCP/PLGC) and control groups. The defect was covered with TCP/PLGC membrane in treatment group. To evaluate regeneration of the bone, computerized tomography (CT) and histopathologic examination were performed. The radiopaque lines were appeared at the original defect sites in TCP/PLGC group but below the original site in control at 4th week. Radiopacity and thickness of the defect sites, and radiopaque lines were more increased at 8th week than those of 4th week. Histopathologic findings revealed fibrous connective tissue migration into the defect and the migration inhibited the structure of new cortex to be placed in the original level in control whereas new cortex growth was found in the level of original line in TCP/PLGC group. However, the new cortical bone in the TCP/PLGC group was thinner and less organized than the adjacent intact cortex, and the amount of new cancellous bones were also scanty. The result suggested that TCP/PLGC membrane is a good guided bone regeneration material to restore the original morphology of humerus in partial defect.     

Assessment of wood surface roughness: comparison of tactile roughness and three-dimensional parameters derived using a robust Gaussian regression filter

Japanese oak and Japanese beech were sanded by hand with abrasive papers of varying grit number. Two three-dimensional parameters selected to characterize their surface roughness – one parameter for the distribution of roughness-profile peaks and the other for the relative area of the roughness-profile peaks above the threshold height – were compared against tactile roughness. The parameters were obtained from roughness profiles as determined by a robust Gaussian regression filter (RGRF) using seven cutoffs. The RGRF filtering process was adjusted specifically for the evaluation of wood surface roughness. Except for a cutoff wavelength of 0.25mm, the RGRF lent itself well to the determination of roughness profiles. No distortion of roughness profiles occurred around deep valleys, and there was a good correlation between the parameters and tactile roughness.Part of this study was presented at the 2002 Kansai Branch Office lecture meeting of the Japan Society for Precision Engineering, Kyotanabe, August 2002     

Weak activity of UDP-glucuronosyltransferase toward Bisphenol analogs in mouse perinatal development

Bisphenol A (BPA) is a widely used industrial chemical that disrupts endocrine function. BPA is an endocrine disrupting chemical (EDC) that has been demonstrated to affect reproductive organ development, brain development, metabolic disease and post-natal behavior. Accordingly, Bisphenol analogs, Bisphenol F (BPF, bis (4-hydroxyphenyl) methane) and Bisphenol AF (BPAF, 4,4-hexafluoroisopropylidene) diphenol) are used as replacements for BPA. BPA is mainly metabolized by UDP-glucuronosyltransferase (UGT), UGT2B1, but this effective metabolizing system is weak in the fetus. In the present study, we demonstrated that hepatic UGT activity toward BPAF was very weak, in comparison with BPA and BPF, in the fetus, pups and dams. Conversely, hepatic UGT activity toward BPF was very weak in the fetus and newborn pups, and was increased to the same level as BPA post-partum. In conclusion, BPAF possibly tends to accumulate in the fetus, because of weak metabolism during the perinatal period, suggesting that the metabolism of individual Bisphenol analogs requires assessment to properly gauge their risks.     

Applicability of effective medium theory to wood density measurements using terahertz time-domain spectroscopy

The use of an effective medium theory is important when accurately measuring wood density using millimeter and terahertz wave techniques. To confirm the applicability of this theory to the evaluation of wood density, the relative permittivity and dielectric loss of oven-dry flat-sawn specimens of 11 different wood species were measured in a frequency range of 0.15–1.2 THz using a transmission measurement system for terahertz time-domain spectroscopy. A mixture model based on the effective medium theory well explained the density dependence of relative permittivity over the entire frequency range, while it did not fully explain that of dielectric loss, especially for higher frequencies. This indicates that wood scatters the terahertz wave with a wavelength close to the transverse sectional dimensions of the pores in wood in the same way as Mie scattering. It was found from the dielectric loss spectrum of wood substance that the frequency around 0.23 THz was preferable for the nondestructive evaluation of wood.     

Effect of pore conformation on dielectric anisotropy of oven-dry wood evaluated using terahertz time-domain spectroscopy and eigenvalue problems for two-dimensional photonic crystals

To clarify the effect of pore conformation on the dielectric anisotropy of wood, the relative permittivity along the longitudinal and tangential axes of flat-sawn oven-dry specimens of 12 different wood species was measured using terahertz time-domain transmission spectroscopy and compared with the values calculated using the eigenvalue problem for two-dimensional photonic crystals. The measured dielectric anisotropy, which is the ratio of the relative permittivity along longitudinal axis to that along the tangential axis, was well explained by the calculated value. It was concluded that the ratio of tangential to radial widths of wood pores affects the relative permittivity along the tangential axis, and that the dielectric anisotropy decreased with an increase in the ratio. This discussion can also be applied to the relative permittivity in frequencies below 0.15 THz. These findings show promise as a new method for evaluating the porous structure of wood.