Effect of phosphogypsum application on the growth and Ca uptake of Komatsuna Brassica rapa L. cv. Natsurakuten

(pp. 1–7)
Application of phosphogypsum PG and limestone to Andisol were compared in terms of their effects on the growth and uptake of Ca in Komatsuna Brassica rapa L. cv. Natsurakuten. The studies were carried out in soil pot cultures, and both PG and limestone were applied to the Andisol at the rates of 0, 0.30, 0.75, 1.50 g kg⁻¹ in the form of CaO.

• 1) 

  Limestone application resulted in an increase in the soil pH. On the other hand, no change was observed in the case of PG application at pH 6.1 ± 0.1 regardless of the application rate. Both soil EC and water-soluble Ca increased in proportion to the PG application rate, and this increase was approximately 5 times greater than that observed when limestone was applied at 1.50 g kg⁻¹. The w-Ca/ex-Ca ratio (water-soluble Ca: 1 M acetic acid-extractable Ca) was clearly increased from 0.12 up to 0.26 in PG, while the value was slightly decreased from 0.12 to 0.05 in limestone.

       

A Growth Performance and Nonlinear Growth Curve Functions of Large- and Normal-Sized Japanese Quail (Coturnix japonica)

This study aimed to evaluate the differences between the growth patterns of large- and normal-sized Japanese quail strains and their F₁ progeny, by fitting their growth parameter values to five nonlinear regression growth models (Weibull, Logistic, Gompertz, Richards, and Brody). The Richards model presented the best fit for both sexes of the large-sized quail strain, whereas the Gompertz model presented the best fit for both sexes of the normal-sized quail strain, based on goodness-of-fit criteria (higher adjusted R² and lower Akaike and Bayesian information criteria). Both sexes of F₁ birds derived from the cross between normal-sized females and large-sized males were best fitted by the Richards model. In contrast, growth parameters of the F₁ birds derived from the cross between large-sized females and normal-sized males were best fitted to the Gompertz model. The data could be fitted nearly as well to the Weibull and Logistic models as to the Richards and Gompertz models. The Brody model presented the poorest fit for the growth parameter values. The results indicated that the Richards and Gompertz models could best describe the growth characteristics of both large- and normal-sized quails. Moreover, the observed growth pattern of the F₁ birds was likely inherited from the male parental strain. To the best of our knowledge, this is the first study comparing the growth curves of the reciprocal F₁ generations with their parental strains in quails.     

Fetal and lactational exposure to the no-observed-adverse-effect level (NOAEL) dose of the neonicotinoid pesticide clothianidin inhibits neurogenesis and induces different behavioral abnormalities at the developmental stages in male mice

Recently, it has been reported that neonicotinoid pesticides (NNs) are transferred from mother to child and are assumed to affect the next generation, but the behavioral effects of NN exposure at different developmental stages have not been investigated. We exposed mice to no-observed-adverse-effect level (NOAEL) doses of clothianidin (CLO) during the fetal and lactational period, and then evaluated the neurobehavioral effects in juvenile and adult mice. Significant increases in anxiety-like behavior and locomotor activity were observed in juveniles and adults, respectively, and neuronal activity and neurogenesis in the hippocampal dentate gyrus were affected in both stages. These results suggest that fetal and lactational exposure to CLO may inhibit neurogenesis and cause different behavioral abnormalities at different developmental stages.     

Structure and properties of syndiotactic polystyrene fibers prepared in high-speed melt spinning process

High-speed melt spinning of syndiotactic polystyrene was carried out using high and low molecular weight polymers, HMs-PS and LMs-PS, at the throughput rates of 3 and 6 g/min. The effect of take-up velocity on the structure and properties of as-spun fibers was investigated. Wide angle X-ray diffraction (WAXD) patterns of the as-spun fibers revealed that the orientation-induced crystallization started to occur at the take-up velocities of 2–3 km/min. The crystal modification wasα-form. Birefringence of as-spun fibers showed negative value, and the absolute value of birefringence increased with an increase in the take-up velocity. The cold crystallization temperature analyzed through the differential scanning calorimetry (DSC) decreased with an increase in the take-up velocity in the low speed region, whereas as the melting temperature increased after the on-set of orientation-induced crystallization. It was found that the fiber structure development proceeded from lower take-up velocities when the spinning conditions of higher molecular weight and lower throughput rate were adopted. The highest tensile modulus of 6.5 GPa was obtained for the fibers prepared at the spinning conditions of LMs-PS, 6 g/min and 5 km/min, whereas the highest tensile strength of 160 MPa was obtained for the HMs-PS fibers at the take-up velocity of 2 km/min. Elongation at break of as-spun fibers showed an abrupt increase, which was regarded as the brittle-ductile transition, in the low speed region, and subsequently decreased with an increase in the take-up velocity. There was a universal relation between the thermal and mechanical properties of as-spun fibers and the birefringence of as-spun fibers when the fibers were still amorphous. The orientation-induced crystallization was found to start when the birefringence reached — 0.02. After the starting of the orientation-induced crystallization, thermal and mechanical properties of as-spun fibers with similar level of birefringence varied significantly depending on the processing conditions.     

Functional insulin‐like factor 3 (INSL3) hormone‐receptor system in the testes and spermatozoa of domestic ruminants and its potential as a predictor of sire fertility

Insulin‐like factor 3 (INSL3) is essential for fetal testis descent, and has been implicated in the testicular and sperm functions in adult males; however, similar functions in domestic ruminants remain largely unknown. This study investigated the functional INSL3 hormone‐receptor system in adult ruminant testes and spermatozoa, and explored its potential to diagnose the fertility of sires. Testes and spermatozoa were obtained from fertile bulls, rams and he‐goats, whereas subfertile testes and spermatozoa were obtained only from bulls. As expected, INSL3 was visualized in Leydig cells, while we clearly demonstrated that the functional receptor, relaxin family peptide receptor 2 (RXFP2), enabling INSL3 to bind was identified in testicular germ cells and in the sperm equatorial segment of bulls, rams and he‐goats. In comparison to fertile bulls, the percentage of INSL3‐ and RXFP2‐expressing cells and their expression levels per cell were significantly reduced in the testes of subfertile bulls. In addition, the population of INSL3‐binding spermatozoa was also significantly reduced in the semen of subfertile bulls. These results provide evidence for a functional INSL3 hormone‐receptor system operating in ruminant testes and spermatozoa, and its potential to predict subfertility in sires.     

In vitro ruminal fermentation and in situ ruminal degradation of tamarind kernel powder extract residue in wethers

We examined the in vitro fermentation characteristics and in situ dry matter (DM) and crude protein (CP) degradability of tamarind kernel powder extract residue (TKPER), a by‐product of polysaccharides thickener processing. Two types of TKPER (I and II), of which the CP and neutral detergent fiber organic matter basis contents (%) were 41.4 and 42.0 and 1.4 and 0.5, respectively, were compared with dry heat soybean (SB), soybean meal (SBM) and dry soybean curd residue (SBCR). The TKPERs had significantly lower in vitro gas production compared to the other products at each observation time (P < 0.05). The in vitro DM and CP digestibility (%) of TKPER I and II were 67.7 and 64.9, and 64.5 and 58.0, respectively, significantly lower than those of SB and SBM (P < 0.05). We used four wethers (55.6 ± 4.6 kg) with ruminal cannulas to investigate the in situ degradability of TKPER I, SB, SBM and SBCR. At the ruminal outflow rate of 0.05/h, the effective degradability (%) values of the DM and CP of TKPER I were 64.1 and 49.7, respectively, which were similar to those of SBM. In conclusion, TKPER had high CP and exhibited in situ degradability similar to that of SBM, suggesting that TKPER could be used as a protein source feed.     

Long-term rearing of Japanese eel larvae using a liquid-type diet: food intake,survival and growth

Fisheries Science - The efficiency of a new liquid-type diet for long-term rearing of Japanese eel larvae until metamorphosis was examined, as was the effect of diet viscosity on diet intake and on...     

Nutritional characteristics of sago palm and oil palm in tropical peat soil

To make clear the nutritional characteristics of sago palm (Metroxylon sagu Rottb.) and oil palm (Elaeis guineensin Jacq.) grown in tropical peat soil, minerals concentration, organic compounds concentration, and photo‐synthetic rate were estimated, and the obtained results were as follows. Since, the nitrogen (N), phosphorus (P), calcium (Ca), magnesium (Mg), and sodium (Na) concentration in mature leaves and trunk were higher in the oil palm than in the sago palm, but potassium (K) concentration was higher in the sago palm than in the oil palm, the minerals (especially N, P, Ca, and Mg) requirement for the oil palm were higher than in the sago palm. This indicates that the sago palm will adapt better than the oil palm to soils with poor nutrients. The manganese (Mn) and zinc (Zn) concentration in leaves of the sago palm and Ca and aluminum (Al) concentration in leaves of the oil palm increased with the increase of aging, indicating that those elements are eliminated from plants through leaf senescence. In the sago palm, the N and P distribution ratio to leaves remained almost constant during growth, indicating that N and P were predominantly distributed to leaves for maintaining leaf function. The photosynthetic rate [μmole carbon dioxide (CO₂) m² LA sec^‐1] at light saturation was lower in the sago palm (5.8) and oil palm (10.0) than in wheat (25.4). As leaf longevity of sago and oil palms was longer (about 12 times) than that of wheat (Triticum aevstium L.), and the minerals concentration and photosynthetic rate remained constant for a long duration of growth, the cumulative carbon (C) accumulation per unit dry weight (photosynthetic rate x leaf longevity) in the individual leaf is assumed to be equal or greater than that of wheat. The photosynthetic ability of sago and oil palms leaves is very important for understanding why sago and oil palms have high productivity in spite of a low nutrient environment.