Estimation of stiffness and strength in timber knee joints with adhesive and verification by experiment

The use of adhesive joints is gradually increasing, especially those with glued-in steel rods (GIRs). There are, however, some problems with the design methods when used for moment-transmitting applications. In this article, design methods for GIRs and cross-lapped glued joints (CLJs) are proposed. For CLJs, we made a hypothesis that both rotational deformation of CLJ and stress of the glue line occurred with bending and shearing deformation of the timber. Using this hypothesis and Kelvin’s theorem, a mechanical model of CLJ is proposed. For GIRs, the axial stress component of the rod and the lateral stress component of the rod were taken into account using the theory of a beam on an elastic foundation. From the comparisons between calculations and experimental results, it was recognized that the stiffness and strength of CLJs and GIRs could be predicted precisely using our proposed models.     

Development of a joint system using a compressed wooden fastener I: evaluation of pull-out and rotation performance for a column—sill joint

Compressed wooden plates and dowels were used to connect members in post-and-beam structures as a substitute for a steel fastener. In order to take advantage of the characteristic properties of compressed wood and to achieve optimum joint performance, two compressed wooden plates were used in each joint to give multiple shear planes for each compressed wooden dowel. Consequently, this type of joint showed very good properties in pull-out and momen-trotation performance, and its engineering design could be further optimized. This joint is expected to be introduced to many kinds of structural systems, including long-span frame structures made of domestic timber found in Japanese residential houses.     

Tangential and radial shrinkage variation within trees in sugi (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>) cultivars

The transverse shrinkage variation within trees was examined for five sugi cultivars. The within-tree trends of tangential shrinkage (α _T) were different by cultivar, whereas radial shrinkage (α _R) increased from pith to bark in most cultivars. The tangential/radial shrinkage ratio (α _T/α _R) decreased from pith to bark in most cultivars, because the radial variation of α _R was larger than that of α _T. The cultivars showed significant differences among cultivars in α _T, α _R, and α _T/α _R, but the difference among cultivars for α _T/α _R was smaller. The relationships between transverse shrinkage and microfi bril angle (MFA), basic density (BD), tree ring parameters, and modulus of elasticity were examined. The α _T and α _R showed positive relationships with BD, latewood percentage, latewood density, and modulus of elasticity, and negative relationships with MFA and ring width. The relationships with earlywood density were weak. Sugi exhibited variation in transverse shrinkage within stem and among cultivars, with the variation affected by MFA, density, and tree ring parameters. Part of this article was presented at the 56th Annual Meeting of the Japan Wood Research Society, Akita, Japan, August 2006, and the 57th Annual Meeting of the Japan Wood Research Society, Hiroshima, Japan, August 2007     

Origin identification of dried seaweed product “nori” by PCR–RFLP analysis of Pyropia yezoensis in the internal transcribed spacer ITS-1 region

Nucleotide sequences in internal transcribed spacer (ITS)-1 region derived from dried nori products produced in Japan, China, and the Republic of Korea were compared. Thalli contained in the Japanese products were genetically homogenous, and their nucleotide sequences in ITS-1 were identical to those of the reference strains of Pyropia yezoensis f. narawaensis. In Chinese products, the thalli were related to P. yezoensis strain Minomiasakusa. In contrast, the thalli in the Korean products were genetically heterogeneous, and several different P. yezoensis strains and other Pyropia spp. were used for dried nori products. In some thalli produced in both China and Korea, the DNA sequences of the ITS-1 region were identical with that of Japan, suggesting that the cultivar strains might have been transplanted from Japan to China in recent years. The 432-bp-long nucleotide sequences in the ITS-1 region of thalli derived from Japanese origin were cleaved to two restriction fragments at 154 and 278 bp by cleavage of PCR-amplified products using MspI. Conversely, almost all of the corresponding sequences derived from China and Korea were lacking MspI or other restriction patterns, except for nori products from some areas that cultivate a closely related strain to the Japanese cultivar.     

Origin identification method by multiple trace elemental analysis of intermuscular bones in grilled eel products produced in Japan, China, and Taiwan

Trace elemental composition in intermuscular bones of grilled eel fillets was analyzed to discriminate the geographic origin of eel products derived from Japan, China, and Taiwan. The intermuscular bones were decomposed with nitric acid-hydrogen peroxide, and twelve elements (Li, Ti, V, Mn, Ni, Co, Zn, Rb, Sr, Ba, Pb, and U) were analyzed by inductively coupled plasma mass spectrometry. Trace elemental composition including six elements: V, Co, Sr, Ba, Pb, and U, in intermusucular bones were significantly different between Japanese domestic eels and imported eels from China and Taiwan. The average content of lead in Japanese eels was 1/4 to 1/6 that in eels imported from China and Taiwan. The data of elemental content in intermuscular bones were used for linear discriminant analysis, and two discriminant models were constructed. In the Japan–China discriminant model, the discriminant probabilities between Japanese origin and Chinese origin were 82.5 and 93.3 %, respectively. In the Japan–Taiwan discriminant model, the discriminant probabilities between Japanese origin and Taiwanese origin were 87.5 and 87.0 %, respectively. Therefore, trace elemental analysis is effective for country-of-origin identification of eels processed as grilled eel fillets.     

Relation between pathogenicity and genetic variation within <Emphasis Type="Italic">Plasmodiophora brassicae</Emphasis>

The relation between diversity of pathogenicity on clubroot-resistant (CR) cultivars of Chinese cabbage (Brassica rapa subsp. pekinensis) bred in Japan and DNA polymorphisms in 17 populations of Plasmodiophora brassicae from cruciferous plants was examined by inoculation tests and random amplified polymorphic DNA (RAPD) analysis using 18 arbitrary primers. Four pathotypes (A–D) were identified after inoculation of six CR cultivars of Chinese cabbage in the 17 populations from cruciferous crops. A relatively high level of genetic diversity was also detected among these populations in the RAPD analysis. Although the four pathotypes could not be clearly differentiated using the RAPD data, most populations of three pathotypes had a consistent location on the dendrogram. All pathotype B (virulent on five cultivars except Utage 70) and D (avirulent on all cultivars) populations, which were common in incompatible interactions with cv. Utage 70, were located in a single subcluster. All five pathotype C populations (virulent only on cv. Utage 70) except for one population grouped in another single subcluster. Because four pathotype A populations (virulent on all six cultivars, races 4 and 9) fell in different subclusters, the populations may be genetically polyphyletic. Populations from cruciferous weed Cardamine flexuosa differed remarkably from those from cruciferous crops in pathogenicity on common cultivars of Chinese cabbage and turnip and C. flexuosa, but they grouped in a single cluster with all race 9 populations from crops. Race 9 populations from crops may thus be closely related to populations from the weed rather than to races 1 and 4 from crops.     

Effect of nanoclay incorporation method on mechanical and water vapor barrier properties of starch-based films

The objective of this study was to investigate the influence of nanoclay incorporation procedure on the mechanical and water vapor barrier properties of starch/nanoclay composite films. Cassava starch films were prepared with (nanocomposite) and without nanoclay (control) in two steps: firstly the production of extruded pellets and secondly thermo-pressing. The nanocomposite films were prepared via two different methods: in D samples the nanoclay was dispersed in glycerol and subsequently incorporated into the starch; and in ND samples all ingredients were added in a single step before the extrusion. All the composite-films were prepared with cassava starch using 0.25 g of glycerol/g of starch and 0.03 g of nanoclay/g of starch. Control samples showed V_A-type crystallinity induced by the manufacturing process and the nanocomposites presented a semicrystalline and intercalated structure. The nanoclay improved the water vapor barrier properties of the starch film and this effect was more pronounced in D samples, where the water vapor permeability (K^w) was 60% lower than that of the control samples. The K^w reduction was associated with decreases in the effective diffusion coefficient (approximately 61%) and in the coefficient of solubility (approximately 22-32%). On the other hand, the incorporation of nanoclay increased the tensile strength and the rigidity of the films and this effect was more significant when the nanoclay was dispersed in glycerol. Thus, the incorporation of nanoclay into starch-based films is a promising way to manufacture films with better mechanical and water vapor barrier properties.     

Identifying the origin of Corbicula clams using trace element analysis

The trace element contents of Corbicula clam shells collected from Japan, Russia, China, and the Republic of Korea were analyzed to determine their geographic origin. The crushed shells were decomposed with nitric acid–hydrogen peroxide, and the concentrations of 14 elements (Li, Mg, V, Mn, Co, As, Rb, Mo, Ba, Ce, Pb, U, Sr, and Ca) were measured by inductively coupled plasma mass spectrometry and inductively coupled plasma optical emission spectrometry. Some of the elements identified in samples displayed a geographic trend. The average content of manganese in Japanese samples was twice that of Russian samples. Conversely, the arsenic content in Japanese samples was approximately half of that in Russian samples. Linear discriminant analysis was applied to the data from Japanese and Russian samples, and a discriminant model was constructed. The discriminant model was used to determine the geographic origin of Corbicula clams produced in Japan, with 89.8 % of those identified as Japanese and 92.2 % of those identified as Russian being classified correctly. Therefore, trace element analysis of the shells of Corbicula clams is a useful technique for the identification of their country of origin.     

Pore structure and the properties of electric double layer capacitor electrode of bamboo-derived activated carbon prepared by superheated steam

Bamboo-derived activated carbon prepared by superheated steam (BAC) exhibited performance for utilization as an electric double layer capacitor (EDLC) electrode. Pore structure and EDLC performances were investigated by comparison with phenol resin-derived activated carbon (MSP-20), which is commercially available and often used for the purpose. The nitrogen adsorption isotherm showed that BAC had a large BET-specific surface area of 1268 g/m² with a developed pore structure, especially of the mesopore, in comparison with MSP-20. It is considered that inherent ash in bamboo promoted activation, in addition to physical activation by superheated steam. Capacitance per electrode volume (C_V) was 52 F/cm³ with BAC. Because the density of BAC is high (0.78 g/cm³) compared with that of MSP-20 (0.58 g/cm³), sufficient C_V for usage was obtained, although the capacitance per electrode mass (C_M) at 5 mA/cm² itself of BAC (67 F/g) was lower than that of MSP-20 (126 F/g). With IR drop, the resistance value of BAC (9.7 Ω) was lower than that of MSP-20 (10.5 Ω). Especially, the diffusion resistance of BAC disclosed to be smaller than that of MSP-20. These results indicated that BAC produced by steam activation is a promising material with a pore structure suitable for ion transfer in EDLC.     

地下水硝酸盐污染来源的推断与溯源方法概述

不同地区的地下水中硝酸盐污染物的来源可能不同,这些差异可以通过一定的方法分析和追溯,本文概述了地下水硝酸盐污染来源的推断与溯源几种常用方法,包括六成分法、派珀图法、相关性分析,以及稳定同位素方法。