Changing rainfall patterns and farmers’ adaptation through soil water management practices in semi-arid eastern Kenya

There is limited documentation of soil and water management technologies that enhance adaptation to climate change in drylands of Kenya. Rainfall patterns were analyzed in the semi-arid Machakos and Makueni counties of eastern Kenya using historical data. A total of forty-three smallholder farmers implementing soil water management practices were sampled, and an estimate of the seasonal water budget for current crop and livestock production systems computed. Analysis of rainfall amounts and distribution shows increasing variability, with the average annual total amounts decreasing over the past 50 years. Furthermore, the number of rainy days within the March-April-May season that can support crop growth is gradually decreasing. These decreases are however not significant at P < 0.05. There were more seasons with low rainfall amounts compared to those with high rainfall amounts. All these subject the smallholder crop and livestock production system to limited soil moisture. Farmers address the risk by harnessing and utilizing green (rainfall stored in soil) and blue (rainfall collected into storage tanks) water technologies. The study found that farmers in these semi-arid counties practice fifteen diverse soil and water management interventions on their farms. The most popular practices are cut-off drains, retention ditches, terracing, run-off harvesting, and agroforestry. The estimated seasonal water budget indicates the need for integrated soil and water management interventions to address the crop and livestock production constraints.     

Improving potassium acquisition and utilisation by crop plants

To avoid loss of yield, crops must maintain tissue potassium (K) concentrations above 5–40 mg K (g DM)^–1. The supply of K from the soil is often insufficient to meet this demand and, in many agricultural systems, K fertilisers are applied to crops. However, K fertilisers are expensive. There is interest, therefore, in reducing applications of K fertilisers either by improving agronomy or developing crop genotypes that use K fertilisers more efficiently. Agronomic K fertiliser use efficiency is determined by the ability of roots to acquire K from the soil, which is referred to as K uptake efficiency (KUpE), and the ability of a plant to utilise the K acquired to produce yield, which is referred to as K utilisation efficiency (KUtE). There is considerable genetic variation between and within crop species in both KUpE and KUtE, and chromosomal loci affecting these characteristics have been identified in Arabidopsis thaliana and several crop species. Plant traits that increase KUpE include (1) exudation of organic compounds that release more non‐exchangeable soil K, (2) high root K uptake capacity, (3) early root vigour, high root‐to‐shoot ratios, and high root length densities, (4) proliferation of roots throughout the soil volume, and (5) high transpiration rates. Plant traits that increase KUtE include (1) effective K redistribution within the plant, (2) tolerance of low tissue K concentrations, and, at low tissue K concentrations, (3) maintenance of optimal K concentrations in metabolically active cellular compartments, (4) replacement of K in its non‐specific roles, (5) redistribution of K from senescent to younger tissues, (6) maintenance of water relations, photosynthesis and canopy cover, and (7) a high harvest index. The development of crop genotypes with these traits will enable K fertiliser applications to be reduced.     

Pattern in escalations in insurgent and terrorist activity

In military planning, it is important to be able to estimate not only the number of fatalities but how often attacks that result in fatalities will take place. We uncovered a simple dynamical pattern that may be used to estimate the escalation rate and timing of fatal attacks. The time difference between fatal attacks by insurgent groups within individual provinces in both Afghanistan and Iraq, and by terrorist groups operating worldwide, gives a potent indicator of the later pace of lethal activity.     

Species differences in total and vertical distribution of branch- and tree-level leaf area for the five primary conifer species in Maine, USA

Vertical distribution of leaf area largely governs both tree structure and function. Models of this important tree attribute have been constructed for several commercially important conifers. However, a limited number of studies have compared alternative modeling techniques and inherent species differences. This study used several existing datasets for the five primary conifer species in Maine, namely balsam fir [Abies balsamea (L.) Mill.], northern white-cedar [Thuja occidentalis (L.)], eastern hemlock [Tsuga canadensis (L.) Carr.], eastern white pine [Pinus strobus (L.)], and red spruce [Picea rubens (Sarg.)] to examine species variation in total and vertical distribution of projected leaf area at the individual branch- and tree-levels. In addition, multiple methods for modeling the vertical distribution of leaf area were examined across the species. For a given branch diameter and location within the crown, eastern hemlock branches held the greatest amount of leaf area, followed by balsam fir, northern white-cedar, white pine, and red spruce. At the tree-level, eastern white pine held the greatest amount of leaf area followed by eastern hemlock, balsam fir, red spruce, and northern white-cedar for a given tree size. Across species, the two-parameter, right-truncated Weibull distribution performed the best for predicting vertical distribution of leaf area when compared to the four-parameter beta and Johnson's S_B distributions (reduction of root mean square error of 1.7–21.1%). Northern white-cedar had a relative distribution of leaf area distinctly different than other species in this study with a mode shifted towards the upper crown. In contrast to red spruce and white pine, the mode of the relative distribution of leaf area for balsam fir and eastern hemlock occurred lower in the crown. Results of this study suggest that differences in total and vertical distribution of leaf area exist between species, but significant amounts of their variation are largely accounted for by bole and crown size.     

Turbine entrainment and passage of potadromous fish through hydropower dams: Developing conceptual frameworks and metrics for moving beyond turbine passage mortality

Potadromous fishes are vulnerable to involuntary entrainment through hydropower turbines. However, turbines can also provide a downstream passage route for potadromous fish. Here, we review evidence for turbine entrainment and passage in potadromous fish, and evaluate the effects of these processes on upstream and downstream populations. We develop conceptual frameworks and metrics to quantify vulnerability to turbine entrainment removals, and to quantify the efficiency of turbines as a downstream passage route. We highlight factors that influence these processes and provide case‐studies demonstrating their applicability. We found that juvenile potadromous fish are being entrained through turbines at rates high enough to impact upstream populations. Given that juvenile passage survival is often high, we argue that turbines provide an important downstream passage route for potadromous fish. We show that entrainment vulnerability is likely a function of interactions between in‐reservoir fish behaviour, habitat configuration and operations and thus not well captured by passage mortality estimates. Similarly, we show that while passage mortality can limit downstream passage efficiency, passage success is also dependent on reservoir and forebay navigation, along with survival and fitness in the downstream river. We advocate for a shift in focus away from estimates of passage mortality and injury, which have previously accounted for the majority of turbine passage research. Instead, we recommend an approach that focusses on quantification of the factors that influence downstream passage efficiency and entrainment vulnerability. Moreover, we highlight the need to better understand the broader scale impacts of these events on upstream and downstream populations.     

Color analysis of storage roots from the USDA,ARS sweetpotato (<Emphasis Type="Italic">Ipomoea batatas</Emphasis>) germplasm collection

The United States Department of Agriculture (USDA), Agricultural Research Service (ARS), Plant Genetic Resources Conservation Unit in Griffin, GA maintains the United States germplasm collection for Ipomoea spp. (Convolvulaceae). During 2012–2014, 737 sweetpotato, Ipomoea batatas (L.) Lam., plant introductions (PI) were acquired as tissue-culture plantlets and then acclimated to greenhouse conditions at the USDA, ARS, U. S. Vegetable Laboratory (USVL), Charleston, SC. Single plants were transferred to plastic-covered plant beds to produce cuttings for replicated field trials. Storage roots were harvested from 690 PIs grown in the field and 695 PIs grown in pots. Color coordinates were obtained for each PI using a tristimulus colorimeter. Hue angle values (h*) ranged from 8.2° to 88.3° (\( \bar{x} \) = 54.9°) for the periderm (peel or skin) of field-grown storage roots (n = 690 PIs) and ? 9.4° (= 350.6°) to 96.2° (\( \bar{x} \) = 51.3°) for pot-grown roots (n = 695 PIs). The red–green coordinate (a*) ranged from 0.8 to 30.7 (\( \bar{x} \) = 12.8) for the periderm of field-grown roots and ? 2.0 to 44.9 (\( \bar{x} \) = 16.1) for pot-grown roots. The yellow–blue coordinate (b*) ranged from 2.8 to 33.1 (\( \bar{x} \) = 19.4) for the periderm of field-grown roots and ? 7.4 to 38.1 (\( \bar{x} \) = 19.3) for pot-grown roots. Color saturation (chroma, C*) ranged from 13.7 to 35.8 (\( \bar{x} \) = 24.9) for the periderm of field-grown roots and 14.9–45.5 (\( \bar{x} \) = 29.3) for pot-grown roots. Lightness (white–black, L*) ranged from 32.6 to 81.7 (\( \bar{x} \) = 54.6) for the periderm of field-grown roots and 32.1–88.2 (\( \bar{x} \) = 64.0) for pot-grown roots. Hue angles ranged from ? 13.1° (= 346.9°) to 100.9° (\( \bar{x} \) = 80.9°) for the stele (flesh) of field-grown storage roots (n = 672 PIs) and ? 29.9° to 103.5° (\( \bar{x} \) = 81.6°) for pot-grown roots (n = 676 PIs); a* ranged from ? 5.6 to 35.0 (\( \bar{x} \) = 8.0) for the stele of field-grown roots and ? 6.0 to 41.0 (\( \bar{x} \) = 7.6) for pot-grown roots; and b* ranged from ? 7.7 to 56.1 (\( \bar{x} \) = 34.6) for the stele of field-grown roots and ? 12.6 to 56.1 (\( \bar{x} \) = 31.8) for pot-grown roots. C* ranged from 12.7 to 65.8 (\( \bar{x} \) = 37.2) for the stele of field-grown roots and 8.9–65.7 (\( \bar{x} \) = 34.5) for pot-grown roots; and L* ranged from 27.8 to 91.1 (\( \bar{x} \) = 77.7) for the stele of field-grown roots and 28.2–91.9 (\( \bar{x} \) = 80.4) for pot-grown roots. There were significant relationships between stele color (h*) and percent dry matter, with orange stele having a significantly lower % dry matter (\( \bar{x} \) = 25.6%, n = 183) compared with roots with cream/white stele (\( \bar{x} \) = 30.8%, n = 373). There appears to be wide genetic diversity for root color characteristics for the United States sweetpotato germplasm collection.     

Method for the detection of synthetic cry3A in transgenic potatoes

All transgenic cultivars of potatoes registered in Canada and the United States have been modified to express a synthetic cry3A gene as a means of conferring resistance against the Colorado potato beetle, an important economic pest of potatoes. A PCR method was developed to amplify a 499 bp region of the synthetic cry3A gene. Using this method, synthetic cry3A could be detected in six different transgenic cultivars. Positive results could be confirmed with PvuII restriction digestion of the PCR-generated amplicon, which resulted in two fragments that were 283 and 216 bp in size. Of the 52 tuber extracts tested with this method, no false positive or false negative results were obtained, suggesting the method could be used with a high degree of accuracy. The absolute limit of detection was the number of cry3A copies present in one or perhaps two haploid copies of the potato genome. The practical limit of detection in tubers on a fresh weight basis was 0.02% for the NL 10-SUP and 0.01% for the remaining cultivars. Synthetic cry3A could also be detected in processed food products such as potato chips, shoestring potatoes, and frozen French fries. The method was suitable for screening potato tuber lots and some processed foods for the presence of synthetic cry3A.     

Temperature effects on the action of acylurea insecticides against tobacco hornworm (Manduca sexta) larvae

The toxic effects of six acylurea insecticides on larvae of the tobacco hornworm were investigated at each of four environmental temperatures (20, 25, 30 and 35°C). This spans the range of temperatures which the insects can tolerate. For all the acylureas tested, mortality increased with temperature when either newly hatched or fourth-instar larvae were given insecticide in their food. Sub-lethal growth inhibition also became more pronounced at progressively higher environmental temperatures. This temperature dependence of acylurea action was not due to altered uptake of the insecticide, since there was no significant variation with temperature in the amount of [¹⁴C]flufenoxuron taken up by fifth-instar larvae when given a single meal containing labelled insecticide. Additionally, mortality of fourth-instar larvae given a single intra-haemocoelic injection of flufenoxuron was significantly greater at higher temperatures, implying that temperature affects a process that occurs after insecticide uptake. The intrinsic ability of acylureas to inhibit chitin synthesis is temperaturesensitive, since flufenoxuron inhibited the incorporation of [¹⁴C]N-acetylalucosamine into chitin by proleg epidermis in vitro significantly less well at 20°C than at the higher temperatures tested. However, there was no significant variation between the effectiveness of in-vitro chitin synthesis inhibition at 25, 30 and 35°C. These data show that the effectiveness of acylurea insecticides is subject to strong temperature effects in the range of temperatures likely to be experienced in the field.     

Evaluation of a continuous glucose monitoring system for use in dogs, cats, and horses

OBJECTIVE: To evaluate a continuous glucose monitoring system (CGMS) for use in dogs, cats, and horses. DESIGN: Prospective clinical study. Animals-7 horses, 3 cats, and 4 dogs that were clinically normal and 1 horse, 2 cats, and 3 dogs with diabetes mellitus. PROCEDURE: Interstitial glucose concentrations were monitored and recorded every 5 minutes by use of a CGMS. Interstitial glucose concentrations were compared with whole blood glucose concentrations as determined by a point-of-care glucose meter. Interstitial glucose concentrations were also monitored in 2 clinically normal horses after oral and i.v. administration of glucose. RESULTS: There was a positive correlation between interstitial and whole blood glucose concentrations for clinically normal dogs, cats, and horses and those with diabetes mellitus. Events such as feeding, glucose or insulin administration, restraint, and transport to the clinic were recorded by the owner or clinician and could be identified on the graph and associated with time of occurrence. CONCLUSIONS AND CLINICAL RELEVANCE: Our data indicate that use of CGMS is valid for dogs, cats, and horses. This system alleviated the need for multiple blood samples and the stress associated with obtaining those samples. Because hospitalization was not required, information obtained from the CGMS provided a more accurate assessment of the animal's glucose concentrations for an extended period, compared with measurement of blood glucose concentrations. Use of the CGMS will promote the diagnostic and research potential of serial glucose monitoring.     

The effects of femoral stem and neck length on cement strains in a canine total hip replacement model

OBJECTIVE: To determine the effects of femoral prosthesis stem length and head size on cement strains in a canine hip replacement system. STUDY DESIGN: An in vitro experimental model. SAMPLE POPULATION: (1) Three standard and 3 1-cm shortened femoral implants with +3 femoral heads. (2) Two standard implants with +0, +3, and +6 femoral heads. METHODS: Femoral stems were embedded in polymethylmethacrylate cement. A uniaxial proximodistal-oriented strain gauge was applied to the cement on the medial and lateral aspects of the construct 1.5 cm, 6.0 cm and 7.0 cm distal to the collar. Each construct with a +3 femoral head was mounted in a materials testing system. An axial compressive load (0-200 N) was applied to the femoral head and cement strains were recorded. Additionally, 2 standard length constructs were also tested with +0 and +6 femoral heads. The effects of stem length and neck length on cement strains were assessed with analysis of variance. RESULTS: Strains increased at all locations with increasing loads for all constructs. Shorter implants had higher strains by 152% and 171%, lateral (P =.003) and medial (P =.0025) to the stem tip. No significant strain differences were noted, at any strain gauge location, between different neck lengths (P values ranged from.20 to.67). CONCLUSIONS: Although a shorter implant stem has a potential to improve implant fit, it led to significantly higher cement strains that may increase the risk for aseptic loosening. Changes in femoral neck length did not significantly affect cement strains under the conditions tested. CLINICAL RELEVANCE: Shortening of the femoral stem currently cannot be recommended in canine total hip replacement. The existing use of variable neck lengths likely does not increase the risk of failure of the femoral stem.