Tailor made plasmin substrates as potential diagnostic tool to test for mastitis

Plasmin is a protease in milk, which concentration is increased during mastitis. The aim of the study was design and characterize short, tailor made fluorogenic substrates for plasmin to see differences in plasmin activity in healthy milk compared to mastitic milk. According to the specificity matrix of plasmin, containing 125 currently known plasmin substrates, six novel plasmin specific substrates were designed and characterized. Eight other substrates were insensitive for plasmin, which was in line with our expectations. The plasmin-sensitive substrates showed no cross-reactivity with proteases from mastitogenic bacteria in vitro. A proof of concept to distinguish healthy milk from mastitic milk is described. Potentially, these substrates present a rapid alternative to the currently established methodologies to detect mastitis in milk.     

The Use of Equine Follicle Stimulating Hormone to Increase Equine Chorionic Gonadotropin in the Pregnant Mare

Equine chorionic gonadotropin (eCG), obtained from pregnant mares, is used for assisted reproductive technologies in laboratory rodents and livestock. The objective of the present study was to use equine follicle-stimulating hormone (eFSH) to increase the incidence of twin pregnancies, through multiple ovulations, and increase eCG. Nineteen light horse–type mares were enrolled in the study. The control group (n = 9) was bred with fresh or cooled semen and given human chorionic gonadotropin (hCG) at the time of breeding. The second group (n = 10) was given 12.5 mg of eFSH intramuscularly twice a day beginning 5–7 days after ovulation. Prostaglandin F2α was administered intramuscularly the second day of eFSH treatment. Treatment with eFSH continued until follicles were >35 mm in diameter, and mares were then given no treatment for 36 hours. The mares were then bred with fresh or cooled semen from the same stallion as the control group and given hCG. Blood samples were taken weekly from day 35 to day 105 after ovulation. Serum concentration of eCG was obtained, and data were analyzed with multivariate analysis using the mixed procedure. Significance was set at P < .05. Data were combined for all mares carrying twins and compared with those carrying singletons. The group of mares carrying twins had higher peak concentrations of eCG and higher values for area under the curve compared with mares carrying singletons (P < .05). These results suggest inducing twins could be a method used to increase eCG production.     

Haplotype phasing after joint estimation of recombination and linkage disequilibrium in breeding populations

A novel method for haplotype phasing in families after joint estimation of recombination fraction and linkage disequilibrium is developed. Results from Monte Carlo computer simulations show that the newly developed E.M. algorithm is accurate if true recombination fraction is 0 even for single families of relatively small sizes. Estimates of recombination fraction and linkage disequilibrium were 0.00 （SD 0.00） and 0.19 （SD 0.03） for simulated recombination fraction and linkage disequilibrium of 0.00 and 0.20, respectively. A genome fragmentation phasing strategy was developed and used for phasing haplotypes in a sire and 36 progeny using the 50 k Illumina BeadChip by： a） estimation of the recombination fraction and LD in consecutive SNPs using family information, b） linkage analyses between fragments, c） phasing of haplotypes in parents and progeny and in following generations. Homozygous SNPs in progeny allowed determination of paternal fragment inheritance, and deduction of SNP sequence information of haplotypes from dams. The strategy also allowed detection of genotyping errors. A total of 613 recombination events were detected after linkage analysis was carried out between fragments. Hot and cold spots were identified at the individual （sire level）. SNPs for which the sire and calf were heterozygotes became informative （over 90%） after the phasing of haplotypes. Average of regions of identity between half-sibs when comparing its maternal inherited haplotypes （with at least 20 SNP） in common was 0.11 with a maximum of 0.29 and a minimum of 0.05. A Monte-Carlo simulation of BTA1 with the same linkage disequilibrium structure and genetic linkage as the cattle family yielded a 99.98 and 99.94% of correct phases for informative SNPs in sire and calves, respectively.     

A Biomechanical Comparison of Headless Tapered Variable Pitch and AO Cortical Bone Screws for Fixation of a Simulated Lateral Condylar Fracture in Equine Third Metacarpal Bones

OBJECTIVE: To compare drilling, tapping, and screw-insertion torque, force, and time for the 4.5-mm AO and 6.5-mm Acutrak Plus (AP) bone screws, and to compare the mechanical shear strength and stiffness of a simulated complete lateral condylar fracture of the equine third metacarpal bone (MC3) stabilized with either an AO or AP screw. STUDY DESIGN: In vitro biomechanical assessment of screw-insertion variables, and shear failure tests of a bone-screw-stabilized simulated lateral condylar fracture. SAMPLE POPULATION: Eight pairs of cadaveric equine MC3s METHODS: Metacarpi were placed in a fixture and centered on a biaxial load cell in a materials-testing system to measure torque, compressive force, and time for drilling, tapping, and screw insertion. Standardized simulated lateral condylar fractures were stabilized by either an AO or AP screw and tested in shear until failure. A paired t test was used to assess differences between screws, with significance set at P < .05. RESULTS: Insertion and mechanical shear testing variables were comparable for AO and AP insertion equipment and screws. CONCLUSION: The 6.5-mm tapered AP screw can be inserted in equine third metacarpal condyles and is mechanically comparable with the 4.5-mm AO screw for fixation of a simulated lateral condylar fracture. CLINICAL RELEVANCE: Considering the comparable mechanical behavior, the potential for less-persistent soft-tissue irritation with the headless design, and the ability to achieve interfragmentary compression by inserting the screw in one hole drilled perpendicular to the fracture plane, the 6.5-mm tapered AP screw may be an attractive alternative for repair of incomplete lateral condylar fractures in horses.     

APPLICATION OF THE PIN-HOLE COLLIMATOR IN SMALL ANIMAL NUCLEAR SCINTIGRAPHY: A REVIEW

The pin-hole collimator is used to improve spatial resolution and magnify areas of interest. The pin-hole collimator has many applications in small animal veterinary scintigraphy. The principles of image formation for the pin-hole and parallel hole collimators are reviewed. The effects of distance on resolution and sensitivity are presented for the pin-hole and parallel hole collimators. Specific application of the pin-hole and parallel hole collimators. Specific application of the pin-hole collimator in veternary scintigraphy are discussed.     

Epoxy Putty for Free-Form External Skeletal Fixators

Objective —To evaluate the suitability of epoxy putty for use as a connecting beam material in a free-form external skeletal fixator.
Design —Mechanical evaluation of beams and the pin-material interface of commonly used methacrylates and the proposed epoxy putty.
Procedure —The apparent modulus, bending strength, and toughness of 10 beams of three methacrylates (Technovit, APEF System, Bone Cement) and three epoxy putties (Oatey Epoxy Putty, All-Metals PowerPoxy, and Plumber's PowerPoxy) were determined in three-point bending. The shear strength of smooth and roughened-shaft pins embedded in the three methacrylates and the Oatey Epoxy Putty was determined by pull-out testing.
Results —The epoxy putties had similar strength, greater apparent modulus, and reduced toughness when compared with the methacrylates. The shear strength of the smooth pin interface with the Oatey Epoxy putty was greater than that with the methacrylates. The interface with roughened pins was much stronger than that with smooth pins for all materials tested.
Clinical Relevance —Epoxy putty is a suitable material for free-form external fixators. It is easy to handle, inexpensive, and has suitable setting times and mechanical properties.