Within-stem variations in mechanical properties of <Emphasis Type="Italic">Melia azedarach</Emphasis> planted in northern Vietnam

Within-stem variations in the mechanical properties of 17–19-year-old Melia azedarach planted in two sites in northern Vietnam were examined by destructive and nondestructive methods. Wood samples were collected from 10, 50, and 90% of the radial length from pith on both sides (North and South) at 0.3, 1.3, 3.3, 5.3, and 7.3 m heights above the ground. The mean values in whole trees of wood density (WD), modulus of rupture (MOR), modulus of elasticity (MOE), and dynamic modulus of elasticity (E_d) at 12% moisture content were 0.51 g/cm³, 78.58 MPa, 9.26 GPa, and 10.93 GPa, respectively. Within the stem, the radial position was a highly (p?<?0.001) significant source of variation in mechanical properties. MOR, MOE, and E_d increased from pith to bark. WD had a strong positive linear relationship with both MOR (r?=?0.85, p?<?0.001) and MOE (r?=?0.73, p?<?0.001). This suggests that it is potentially possible to improve mechanical properties through controlling WD. MOR had also a strong linear relationship with E_d (r?=?0.84, p?<?0.001). This indicates that E_d is a good indicator to predicting the strength of wood if the density of measured element is known. Besides, the stress wave method used in this study provides relatively accurate information for determining the stiffness of Melia azedarach planted in northern Vietnam.     

Impact of traditional soil burning (guie) on Planosol properties and land‐use intensification in south‐western Ethiopia

In the Gilgel Gibe catchment in Ethiopia, local farmers intensify land use on Planosols by adjusting a traditional soil burning practice known as guie. The burning practice used to be applied in a cycle of shifting cultivation. However, more recently, farmers burn small plots to make fertile seedbeds for Eucalyptus seedlings in the first year before these trees are transplanted to larger plots. The purpose of this research was to assess the physico‐chemical properties of Planosols that have been subjected to burning over the last 10 yrs and evaluate the contribution of guie to land‐use intensification of these soils. Transect studies and interviews of local farmers, followed by chemical, physical and micromorphological analyses of samples from selected plots were used to compare the soil properties of recently (0–2 yrs) and formerly (3–10 yrs) burnt Planosols with those of unburnt Planosols. The analytical results show that the burning practice improved nutrient availability in the first 2 yrs after guie. Increased amounts of exchangeable aluminium (Al) were reported in the long term. Charge fingerprints illustrate that the nutrient‐buffering capacity of the soil was high shortly after the practice but subsequently decreased with time. Given the population pressure on the formerly extensively used Planosols, it is argued that the current application of guie on small, localized plots for raising Eucalyptus seedlings is well adapted to the local socio‐economic context and promotes land‐use intensification on the Planosols. The increased exchangeable Al content of former Eucalyptus seedbeds merits further in‐depth research into the biophysical sustainability of the burning practice.     

Validation of tuber blight (Phytophthora infestans) prediction model

Potato tuber blight caused by Phytophthora infestans accounts for significant losses of tubers in storage. Despite research on infection and management of tuber blight, there is paucity of information on the prediction of the occurrence tuber blight or modelling of tuber infection by P. infestans under field conditions. A tuber blight prediction model was developed in New York in experiments conducted using cultivars Allegany, NY101, and Katahdin in 1998 and 1999. This model was validated using data collected from the potato cultivar Snowden in field experiments in Laingsburg, Michigan from 2000 to 2009. In both New York and Michigan experiments, disease was initiated by artificial inoculation of cultivars with a US-8 isolate of P. infestans. Mean leaf area affected ranged from 0 to 94% at New York, and 0 to 93% at Michigan. At New York and Michigan, mean tuber blight incidences ranged from 1 to 40% and 0 to 15%, respectively. In the validation of the model using data collected at Laingsburg, Michigan, the model correctly predicted tuber blight incidence in 7 out of 9 years. Comparison of observed with predicted values indicated that slopes of the regression line between observed and predicted germination and infection data were not significantly different (P > 0.3547). Correlation coefficient between observed and predicted values was high (r² > 0.65) and the coefficient of variation of the residuals of error was about 12%. Although inoculum availability is assumed in the model, incorporation of relationships of inoculum density, propagule survival in soil, and tuber blight incidence would greatly improve the prediction of tuber blight under field conditions.     

Radium isotope accumulation in animal thyroids

Uranium and thorium daughters are ten times more concentrated in thyroids from some bovine animals than in the teeth of the same animals. These radioactive isotopes are believed to be from natural sources, but their resulting annual dosage of thyroid radiation has exceeded that from iodine-131 fallout.     

Half-sib progeny evaluation and selection of potatoes resistant to the US8 genotype of Phytophthora infestans from crosses between resistant and susceptible parents

The objectives of this study were to evaluate the use of potato (Solanum tuberosum L.) late blight (Phytophthora infestans (Mont.) de Bary) resistant parents in cultivar development and identify superior clones possessing moderate to high late blight resistance combined with acceptable maturity and tuber quality. Ninety-five crosses were made between eight unadapted parents with reported late blight resistance (B0718-3, Bertita, Bzura, Greta, Libertas, Stobrawa, Tollocan and Zarevo) and susceptible parents (cultivars or advanced breeding clones) adapted to North American growing conditions. A total of 408 field selected clones were assessed for late blight resistance in the greenhouse and in the field using a mixture of US8 P. infestans isolates (A2 mating type, metalaxyl resistant) that overcame all known R-genes except R8 and R9. Clones with ≤ 10% infected foliar area in the greenhouse test or ≤ 0.30 RAUDPC (relative area under the disease progress curve) value in the field in 1998 were re-tested in 1999. A total of 118 (29% of 408) putative late blight resistant clones were selected. The eight late blight resistant parents differed in both the ability to transmit late blight resistance and in the level of resistance transmitted to the progeny. The Tollocan and B0718-3 families (half-sib progeny) had the greatest degree of resistance and frequency of resistant clones. Scott-Knott cluster analysis ranked 79 clones (67% of 118) in the high and moderate late blight resistant groups. Among these 79 clones, 19 clones had vine maturity equal to or earlier than mid-season combined with acceptable tuber quality. Further selection in 2000 resulted in eight advanced selected clones (six from Tollocan and two from B0718-3 families) with the same level of resistance as the parent combined with vine maturity and tuber quality equivalent to Atlantic, a standard cultivar for chip processing in North America. The results indicate that this breeding approach can be used to select parents for late blight resistance breeding and to identify superior clones with high levels of late blight resistance and marketable vine maturity and tuber quality. This revised version was published online in July 2006 with corrections to the Cover Date.     

Occurrence of 2n gametes in the F1 hybrids of Oriental × Asiatic lilies (Lilium): Relevance to intergenomic recombination and backcrossing

Cytological modes of the origin of 2n gametes were investigated in six different genotypes of F₁ hybrids between Oriental and Asiatic (OA) lilies (Lilium, 2n = 2x = 24). Chromosome pairing between the parental genomes was very low, the average frequency range from 0.3 to 1.2 bivalents per cell among the genotypes. Within a genotype the frequency of bivalents varied from 0 to 6 in some cases. The normally occurring haploid pollen grains were totally sterile. In contrast, in different genotypes, variable percentages of 2n pollen were found and shown to be fertile as estimated from pollen germination. A cytological analysis of Metaphase I and subsequent stages of meiosis using genomic in situ hybridization (GISH) revealed that there was intergenomic recombination between the alien genomes. Following Metaphase I stage, three different types of abnormal cytological events led to the formation of 2n pollen: (i) Post-Metaphase I division (PMI), (ii) Post-Metaphase II division (PMII) and (iii) Asymmetric Cytokinesis of the pollen mother cell followed by chromosome division. All three cytological events led to first division restitution (FDR) gametes. Based on in vitro pollen germination it was proved for two genotypes that 2n pollen was viable only during the first day of anthesis. It was possible to use 2n pollen successfully for backcrossing. Implications of 2n pollen for intergenomic recombination in BC₁ progenies are discussed.     

Effect of pre-planting temperature and light treatments of seed tubers on potato yield and tuber size distribution

Summary From 1985 to 1987 field experiments were caried out to test the influence of different pre-planting storage treatments on yield and size distribution of potato crops. The storage treatments included 4, 8 and 12°C in the light and in the dark, for different periods before planting. Subjecting the seed tubers to light at low temperatures induced crops to produce a larger proportion of smaller sized tubers while storing seed tubers at higher temperatures in the dark led to an increase of tubers >55 mm. These observations were confirmed in five field experiments with two cultivars at two sites and in three growing seasons.     

Potato (Solanum spp.) production using apical cuttings and tuberlets under three contrasting environments of Vietnam

Potato production from rooted apical cuttings or from small tubers (l–20g) produced in high density beds has great potential in Asia. This is particularly important in non-traditional warmer environments. This research was conducted to assess the feasibility of producing many small tubers in high density beds. A second objective compared tubers from beds with transplanted rooted cuttings and traditional seed tubers for growth and yield in the field. Tuberlet production in beds exceeded 2000/m² with a density of 1000 plants/m² under optimal growing conditions while under high temperatures only about 1.25 tuberlets/plant were produced. In field experiments, transplanted cuttings yielded 20 t/ha in the mid and high elevation areas, only slightly less than tuberlets of 5–10g while at the hot site, yields were generally only 8 to 10 t/ha for both materials. Larger healthy seed tubers produced significantly higher yields at the low and high elevation sites. Tuberlets of 1–5g were also able to give yields of 20 t/ha in the mid-elevation site. These results indicate that cuttings and small tuberlets are two ways of growing potatoes which need to be further evaluated for socioeconomic assessment by farmers.     

Improved control of lettuce drop caused by Sclerotinia sclerotiorum using Contans combined with lignin or a reduced fungicide application

The use of Contans (Coniothyrium minitans) in Belgian commercial lettuce greenhouses has so far not always fulfilled the expectations of growers. With the aim of improving the efficacy of control of lettuce drop (Sclerotinia sclerotiorum), Contans applied alone and Contans combined with Radix (Trichoderma asperellum and Trichoderma gamsii), Kraft pine lignin and Rovral was compared in three successive lettuce crops in a naturally infested greenhouse. At harvest of each crop, the effect on disease incidence, and the effect on viability and fungal infection of sclerotia buried prior to each crop was evaluated. Contans applied alone negatively affected the sclerotial viability, but did not reduce lettuce drop symptoms. The combination of Contans with Kraft pine lignin, on the other hand, reduced sclerotial viability and lettuce drop compared with the untreated control in the last crop. Furthermore, when Contans was combined with Kraft pine lignin, a higher number of infected sclerotia was observed compared with Contans applied alone. When Radix was added to the combination, there was no extra benefit for the control of lettuce drop. The combination of one Rovral application and Contans resulted in a significant control of lettuce drop together with a negative effect on sclerotial survival. Two Rovral applications, by contrast, reduced the ability of C. minitans to parasitize and kill the sclerotia. To conclude, integration of Contans with a reduced Rovral application and with Kraft pine lignin has potential to improve the control of lettuce drop in commercial greenhouses.