Initial shapes of stress-strain curve of wood specimen subjected to repeated combined compression and vibration stresses and the piezoelectric behavior

This study investigated the relationship between the initial shape of the stress (σ)-strain (ε) curve of a Chamaecyparis obtusa wood specimen subjected to repeated combined compression and vibration stresses at various angles between the fiber direction and load direction and the piezoelectric behavior. The main findings of the study are: (1) the σ-ε curve became convex initially, and then the stress was proportional to the strain. The σ-ε curve had almost the same shape during both loading and unloading. (2) The σ-piezoelectric voltage (P) curve was nonlinear, with a maximal point or cusp on the curve, which had almost the same shape during both loading and unloading, as was also observed for the σ-ε curve. (3) The plot of the first derivative of the stress [dσ/dε (= σ′)] against ε was nonlinear. The σ′-ε and P-ε curves at various angles were fairly similar. (4) The stress at the maximal point (or cusp) of the σ-P curve decreased with an increase in the angle between the fiber direction and load direction. The tendency of the stresses was very similar to that of Young’s modulus and compression strength calculated from Hook’s law and Hankinson’s law, respectively.     

Mechanical behavior of the crystal lattice of natural cellulose in wood under repeated uniaxial tension stress in the fiber direction

This study investigated the relationship between the cellulose crystal lattice strain (crystalline region) and the macroscopic surface strain in specimens of Chamaecyparis obtusa wood under repeated uniaxial tension stress in the fiber direction. Changes in the strain of the crystal lattice were measured from the peak of (004) reflection using the transit X-ray method. The macroscopic surface strain of each specimen was measured with a strain gauge. In both loading and unloading, the surface strain changed linearly with changes in stress. However, crystal lattice strain was not linear but exhibited changes along a curve with changing stress. Under stressed conditions, the crystal lattice strain was always less than the surface strain, regardless of the frequency of repetition in the loading and unloading cycle. The ratio of the crystal lattice strain to the surface strain showed a negative correlation for stress in both loading and unloading. That is, the ratio decreased with increasing stress, and finally tend to converge to a specific value. The ratio (I/I ₀) between the diffracted intensity (I ₀) in the (004) plane in the unloaded condition and the diffracted intensity (I) in the (004) plane in the loaded condition tend to converge on a specific value with increasing frequency of repetition. When the substantial tension Young’s modulus of the wood in the longitudinal direction decreased, the ratio of the strain of the crystal lattice to the surface strain also decreased. Moreover, the ratio decreased with increasing microfibril angle of the specimen.     

Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.     

Methylation of free-floating deoxyribonucleic acid fragments in the bronchoalveolar lavage fluid of dogs with chronic bronchitis exposed to environmental tobacco smoke

Background

The etiology of canine chronic bronchitis (CB) is not completely understood, although exposure to environmental tobacco smoke (ETS) affects the airway inflammatory responses in some dogs with CB. The mechanism by which this occurs is unknown.

Findings

We investigated the concentrations and methylation rates of free-floating DNA fragments in bronchoalveolar lavage fluid (BALF) from dogs with chronic bronchitis. Based on serum cotinine levels, dogs with CB were divided into 2 groups: dogs that either had or had not been exposed to ETS. Our results demonstrated that the total nucleated cell and macrophage numbers increased in BALF of ETS-exposed dogs with CB. There were no significant differences in DNA concentrations and methylation rates in BALF between the 2 groups. However, 3 out of 8 dogs exposed to ETS had high DNA methylation rates in their BALF samples.

Conclusion

Our results suggest that ETS exposure leads to epigenetic modifications of cellular components in BALF in dogs diagnosed with CB.     

Increased proportions of CCR4+ cells among peripheral blood CD4+ cells and serum levels of allergen-specific IgE antibody in canine chronic rhinitis and bronchitis

Canine chronic rhinitis (CR) and bronchitis (CB) are suspected to be allergic diseases. The present study tested whether dogs diagnosed with CR or CB present an atopic predisposition based on the ratio of CC chemokine receptor 4 (CCR4)-positive cells among peripheral blood CD4-positive cells (CCR4/CD4) and the serum levels of allergen-specific IgE antibodies. We found that most dogs with CR and CB have a possibility of atopic predisposition, and macrolide therapy constitutes an alternative to corticosteroid therapy in controlling the clinical signs.     

Pharmacokinetics of metoclopramide in calves with renal dysfunction

To clarify the effect of renal dysfunction on pharmacokinetics of the prokinetic agent metoclopramide (MCP), we administered intravenously 0.4 mg/kg MCP to healthy calves and calves subjected to right kidney vessel ligation (ligation) without or with a subsequent left nephrectomy (ligation plus removal). Plasma MCP concentration, glomerular filtration rate (GFR) and plasma prolactin level were measured by liquid chromatography-tandem mass spectrometry, simplified equation using iodixanol and enzyme-linked immunosorbent assay, respectively. Only in calves with ligation plus removal, plasma MCP concentrations were increased significantly 6, 8 and 12 hr after injection, showing that a negative correlation was observed between the plasma MCP concentrations and GFR value. A tendency to increase in plasma PRL concentration was noted also in these calves. In conclusions, plasma MCP concentrations depend on the GFR mode in calves, and its critical GFR value was estimated.     

Changes in the predicted function of the rumen bacterial community of Japanese Black beef cattle during the fattening stages according to Kyoto Encyclopedia of Genes and Genomes (KEGG) analyses

We investigated changes in the predicted functions of the rumen bacterial community in Japanese Black beef cattle during fattening. Nine cattle were fed a high-concentrate diet during the early, middle, and late fattening stages consecutively (10–14, 15–22, and 23–30 months of age, respectively). The rumen fluid and solid samples collected at each stage were subjected to sequencing analyses. The sequencing results were clustered and classified into operational taxonomic units (OTUs). Representative sequences and a raw counting table for each OTU were submitted to the Piphillin website. The predicted functions were revealed by the Kyoto Encyclopedia of Genes and Genomes database as the ratio of the total sequence. In the early stage, “Biosynthesis of secondary metabolites” was significantly higher in the fluid fraction than in the solid fraction. “Two-component system” in the middle stage was significantly lower and “Purine metabolism” in the late stage was significantly higher in the fluid fraction than those in the solid fraction. The fluid fraction was significantly correlated with acetic acid, propionic acid, and bacterial metabolism, such as “Biosynthesis of secondary metabolites” and “Sugar metabolism.” Moreover, the solid fraction was correlated with “Purine metabolism” and “Biosynthesis of secondary metabolism”. These results suggest that the rumen bacterial community in Japanese Black beef cattle adapts to changes in rumen conditions by altering their functions in response to a long-term high-grain diet.