Vibrational properties of harp soundboard with respect to its multi-layered structure

The vibrational properties of a harp soundboard were investigated with respect to its multi-layered structure. The surfaces of harp soundboards are usually reinforced with veneer; however, this reduces the specific dynamic Young’s modulus (E′/ρ) and significantly increases the internal friction (Q ^?1) of soundboards. Since smaller E′/ρ and greater Q ^?1 values impart a smaller acoustic conversion efficiency, the attachment of veneer is predicted to reduce the amplitude of the sound produced, as suggested by harp makers. The vibrational properties of veneer-reinforced wood are elucidated using a multi-layered model comprising base wood, a glue layer, veneer and a varnish layer. The results of calculations suggest that a thinner veneer attached with minimal glue would increase the sound amplitude.     

A novel method for the reinforcement of harp soundboard

The effects of a carbon fiber-reinforced plastic (CFRP) overlay on the wooden soundboard of a harp were compared to those of conventional veneer reinforcement with respect to the vibrational properties and bending strength. CFRP reinforcement has a minimal effect on the vibrational properties of the soundboard in its width direction, whereas conventional veneer reinforcement significantly reduces the acoustic conversion efficiency of the soundboard. The CFRP-reinforced soundboard also has sufficient bending strength in its longitudinal direction. These results indicate that CFRP is a promising material for the reinforcement of the wooden soundboards of harps to minimize the reduction of the sound amplitude.     

Altitudinal differences in bark stripping by sika deer in the subalpine coniferous forest of Mt. Fuji

Deer expansion is a growing concern for forest ecosystem management. In Japan, upward expansion to subalpine and alpine areas has reached alarming proportions in recent years. We examined bark stripping by sika deer along an altitudinal gradient in the subalpine coniferous forest at three altitude ranges (1800-2000 m, 2000-2200 m, and 2200-2400 m) on the southern slope of Mt. Fuji. We tested differences in densities and diameter at breast height (DBH) of trees and those with bark-stripped stems of all tree species among the three altitude ranges. Then, we compared the relative densities of deer, based on pellet counts, to determine the impact of deer in relation to deer use and forest stand patterns across the altitudinal range studied. The results of the study show that differences in bark stripping by sika deer depended largely on the elevation and the species. Larger stems were sparsely distributed in the lowest elevation zone between 1800 and 2000 m. The relative density of deer was highest in the areas exhibiting high bark-stripping intensity on small regenerating trees of the dominant coniferous species, Abies veitchii, and on broadleaf species. In the highest elevation zone between 2200 and 2400 m, smaller stems were densely distributed, and the relative deer density was lowest where the bark-stripping intensity on small stems was lower for all three species studied. The damage to subalpine tree stems corresponded to the availability of palatable tree species with a small diameter, as reflected by the successional stage along the elevational gradient of subalpine forest on Mt. Fuji. These results suggest that the continuous impact of bark stripping on the dominant tree species might cause severe changes in forest succession.     

Long-term growth analyses of Japanese cedar trees in a plantation: neighborhood competition and persistence of initial growth deviations

The individual growth of tree diameter at breast height (dbh) is analyzed in an even-aged plantation of Cryptomeria japonica from stand age of 45 to 94 years, to examine how the growth of individual trees has been affected by the changes in spacing resulting from thinning operations. At any age, a significant proportion (0.37–0.46) of the variation in dbh growth during a 5–11-year period was explained by dbh at the beginning of the period, probably due to greater leaf mass of larger trees. Next, either one-sided or two-sided competition was added to the model, by calculating the basal area (BA) of neighboring trees around each tree within a given radius or BA for trees having larger dbh than the focal tree within the radius. After preliminary analyses, a radius of 8 m was selected as the critical range for tree competition. Although both types of competition explained a significant proportion (0.09–0.43) of growth variation, one-sided competition was not significant at ages greater than 54 years. Based on the model at 45 years of age, the initial deviation of growth rate for each tree from the predicted rate was calculated and added to the models as a third variable. This raised the coefficient of determination up to 0.50–0.74. These findings have practical significance for forest plantation management, particularly for controlling the growth of standing trees via thinning, to produce high-quality timber in the future.     

Image analysis and bending properties of model OSB panels as a function of strand distribution,shape and size

The technique of image analysis has been used to assess the quality of model oriented strand board panels by investigating the relationships between shape and size of strands, the distribution of strands and bending properties. A batch of commercial strands was analysed by image analysis and the distribution of the shape and size of strands was quantified. The strands were categorised into five strand types as a function of size and aspect ratio. In general, strand shapes were observed to be mostly rectangular and there was also a wide variation in strand dimensions in commercial material. Bigger area strands had low aspect ratios and small strands had high aspect ratios. Half of the commercial strands were longer than 100 mm.Model OSB panels were manufactured in the laboratory by hot pressing strand mats formed from each of the five strand types. Strands were laid up by hand into the forming mat and following pressing the orientation and shape of strands was evaluated by image analysis and the panels were tested in a three point bending. Large area (type 3) strands with high aspect ratios produced model panels with optimum strand orientation and mechanical properties.Type 3 panels were also fabricated from strands dropped through a slotted forming device in order to simulate the delivery of strands to the forming line under factory conditions. As the height of strand delivery increased from 0 to 100 to 200 mm the disorientation of strands in the pressed panels progressively increased and as a result mechanical properties in bending were reduced.Image analysis is therefore a powerful tool for evaluating the distribution of commercial strand shapes and the relationship between strand geometry, strand orientation and the mechanical properties of oriented strand board.     

Involvement of two different types of Verticillium dahliae in lettuce wilt in Ibaraki Prefecture, Japan

Although wilt diseases of various plants by Verticillium dahliae occur worldwide, Verticillium wilt of lettuce is relatively new and rare. In 2009, this disease appeared suddenly in commercial fields in Ibaraki Prefecture, Japan. To investigate the cause of the disease, we characterized each lettuce isolate for pathogenicity, mating types, and genetic characteristics and found two types of V. dahliae. A population that included at least two types of V. dahliae was the putative infection source of the disease. Effective management systems against V. dahliae isolates of different races and having different host ranges are necessary.     

Use of microsatellite DNA and amplified fragment length polymorphism for Cherry salmon (Oncorhynchus masou) complex identification

Formosa landlocked salmon (Oncorhynchus masou formosanus), an endemic, critically endangered subspecies of Cherry salmon (Oncorhynchus masou) complex, is only found in Taiwan. Because the eyed eggs and ungutted carcasses of Pacific salmons (genus Oncorhynchus) are imported for aquaculture and food to Taiwan from overseas every year, the requirement for preventing illegal trade or accidental commercial imports to avoid unwanted fish from contaminating the gene pool of Formosa landlocked salmon and infect them with diseases is critical for the conservation of Formosa landlocked salmon. Traditional morphology‐based species identification is impossible for salmon eggs and larvae that lack clearly defined morphological features. In the present study, the genetic differences among four subspecies (Oncorhynchus masou ishikawae, O. masou subsp., Oncorhynchus masou masou and O. masou formosanus) of Cherry salmon complex were determined from microsatellite DNA and amplified fragment length polymorphism analyses. We successfully generated a genetic marker to aid traditional taxonomy and investigate the integrity of the current taxonomic status among members of Cherry salmon complex. Use of molecular markers, in combination with traditional morphological identification, is a promising tool for identifying four closely related subspecies of Cherry salmon complex.     

Nephrocalcinosis formation by soy isoflavones in male rats

Isoflavones (IFs), found in the form of both aglycones and glucosides in soybean foods, induce weak estrogenic activities. Although IFs have a number of health benefits, it was previously reported that IFs cause nephrocalcinosis (NC) in the kidney of male Fischer 344 (F344) rats. The present study aims to elucidate the safety of IFs by focusing on IF-induced NC formation in rats. Fermented soybean extract (FSE) containing 420 mg/g isoflavone aglycones was orally administered to male F344 and Sprague-Dawley (SD) rats for 28 days. FSE induced NC formation in the kidney of F344 rats, but not in SD rats. However, absorption of IFs did not differ between F344 and SD rats. NC formation and its severity of FSE were histologically compared with those of soybean extract (SE) containing 518 mg/g isoflavone glucosides in F344 rats. There were no differences in the number of NC formations and the extent of calcium deposit between FSE and SE groups. To examine the dose effect of FSE on NC formation, doses of 20, 140, or 1000 mg/kg FSE were administered to F344 rats for 90 days. NC formation was observed in the 140 and 1000 mg/kg groups. These results indicated that a high dose of oral administration of IFs induced NC formation depending on the strain of rat.