Chemical changes in steam-pressed kenaf core binderless particleboard

The effects of chemical changes in kenaf core binderless particleboards on the bonding performance and thickness swelling of boards were investigated by chemical and spectroscopic analyses. Mild steam-injection treatments (0.6–1.0MPa) caused significant degradation of hemicelluloses, lignin, and cellulose. Conventional hot pressing caused a lower degree of degradation of the chemical components. The hot-pressed kenaf core board without any binders showed poor bonding performance. Thus, it was found that partial degradation of the three major chemical components of the kenaf core by mild steam-injection treatment increased the bonding performance and dimensional stability of the binderless boards, and gave better quality binderless boards than those made by hot-pressing treatments.Part of this report was presented at the 4th International Wood Science Symposium, Serpong, Indonesia, September 2002; and at the 53rd Annual Meeting of The Japan Wood Research Society, Fukuoka, March 2003     

Probabilistic evaluation of the final moisture content of kiln-dried lumber using the bootstrap method

This paper presents a probabilistic method of evaluating the final moisture content (MC) of lumber obtained at the end of the kiln-drying process. The final MC data of three different drying tests conducted in past studies were analyzed using the bootstrap method. Target MC was tentatively set below 20 % in the analysis. Two characteristic parameters representing the final MC were estimated with bootstrap confidence intervals. These parameters were the standard deviation (SD) and the percentage of the population that met the MC requirement of less than 20 % (P ₂₀). The histograms of the final MC and the subsequent goodness-of-fit tests revealed that the final MC data of two drying tests did not follow any classical probability distributions, including Normal, Log-Normal, Weibull, and Gamma distributions, thus indicating the need for nonparametric statistics. The uncertainty of the final MC could be evaluated with the estimated SD and P ₂₀. After deriving the relationships between P ₂₀ and the corresponding probability that P ₂₀ is not achieved, we demonstrated how such relationships could provide a kiln operator with information to facilitate better decision-making in optimizing a drying schedule.     

Termite repellent sesquiterpenoids from Callitris glaucophylla heartwood

Fractions of methanol and ethanol extracts from the heartwood of white cypress pine (Callitris glaucophylla Thompson et Johnson) were investigated for their repellent activity against subterranean termite Coptotermes formosanus Shiraki worker using a two-choice semicircular filter paper test at 0.5% (w/w) concentration. Fraction CY-E2 composed of (−)-citronellic acid, guaiol, α-, β-, and γ-eudesmol isomers as well as an unknown compound, showed the highest statistically significant repellency (97.8% ± 2.2 SEM) of all fractions tested. Bioactivity-guided fractionations using high-performance liquid chromatography led to the isolation of two, oxygenated eudesmane-type sesquiterpenes with α-methylene moieties, both termite-repellent compounds. These compounds were subsequently identified as ilicic acid methyl ester (IAME) and costic acid by means of spectroscopic analyses, electron impact mass spectrometry, and nuclear magnetic resonance spectroscopy. We report the isolation of both IAME and costic acid from C. glaucophylla heartwood for the first time. Part of this paper was presented at the 47th Symposium on the Chemistry of Terpenes, Essential Oils, and Aromatics, Tokyo, November 2003     

Effects of chronic acid fog exposure with soil acidification or nitrogen loading on nutrient status in Abies firma seedlings

To clarify the nutrient status in momi fir (Abies firma Sieb. et Zucc.) seedlings under complex stress conditions of acid fog with soil acidification or nitrogen loading, we exposed seedling shoots to simulated acid fog (pH 3) and simultaneously loaded the soil with acid or excess nitrogen for 17 months. Proton and nitrogen loading reduced K concentration in soil, but these treatments had little effect on the nutrient status of fine roots in momi fir seedlings. Acid fog exposure resulted in reduced concentrations of Mg, Al, and Fe in current-year needles and Mg, Al, Cu, Fe, and Zn in 1-year-old needles. The complex effects of acid fog exposure with proton or nitrogen loading on nutrient status were relatively slight. However, elements such as Al and Cu notably reflect the effects of proton loading. These results show that the nutrient status of trace elements, rather than major elements, in needles of momi fir seedlings is sensitive to exposure to acid fog or proton loading.     

Genetic diversity of Populus euphratica populations in northwestern China determined by RAPD DNA analysis

Five Populus euphratica Oliver populations in northwestern China were analyzed using RAPD DNA markers to determine genetic diversity among and within populations. One hundred-and-five polymorphic bands were observed, ranging in size from 250 bp to 1700 bp, using 10 primers. Only one population on the north side of the Tianshern Range had a unique band common to all individuals that was not found in individuals from populations in the Tarim River valley. Intra-population genetic diversity was high in two populations along the Tarim River and low in the other three populations. There was no significant correlation between genetic distances and geographic distances. The result of correspondence analysis shows that the individuals from the three populations with low genetic diversity are isolated from each other. The result of cluster analysis based on genetic distance shows that the population in the Tianshern Range is genetically distant from the other populations. These results suggest that the Tianshern Range population was genetically isolated from the other populations.     

Specific detection of potentially allergenic kiwifruit in foods using polymerase chain reaction

Kiwifruit (Actinidia deliciosa and Actinidia chinensis) is allergenic to sensitive patients, and, under Japanese regulations, it is one of the food items that are recommended to be declared on food labeling as much as possible. To develop PCR-based methods for the detection of trace amounts of kiwifruit in foods, two primer pairs targeting the ITS-1 region of the Actinidia spp. were designed using PCR simulation software. On the basis of the known distribution of a major kiwifruit allergen (actinidin) within the Actinidia spp., as well as of reports on clinical and immunological cross-reactivities, one of the primer pairs was designed to detect all Actinidia spp. and the other to detect commercially grown Actinidia spp. (i.e., kiwifruit, Actinidia arguta, and their interspecific hybrids) except for Actinidia polygama. The specificity of the developed methods using the designed primer pairs was verified by performing PCR experiments on 8 Actinidia spp. and 26 other plants including fruits. The methods were considered to be specific enough to yield target-size products only from the target Actinidia spp. and to detect no target-size products from nontarget species. The methods were sensitive enough to detect 5-50 fg of Actinidia spp. DNA spiked in 50 ng of salmon testis DNA used as a carrier (1-10 ppm of kiwifruit DNA) and 1700 ppm (w/w) of fresh kiwifruit puree spiked in a commercial plain yogurt (corresponding to ca. 10 ppm of kiwifruit protein). These methods would be expected to be useful in the detection of hidden kiwifruit and its related species in processed foods.     

Determination of theaflavins including methylated theaflavins in black tea leaves by solid-phase extraction and HPLC analysis

A quantitative method for four theaflavins and two methylated theaflavin derivatives in black tea leaves was developed by solid-phase extraction and a high-performance liquid chromatographic method with photodiode array detection. The theaflavins in black tea leaves were extracted three times with 40 vol 50% aqueous ethanol (mg dry tea powder/mL) containing 2% ascorbic acid. The ethanol extracts were diluted 4-fold with distilled water. All diluted extracts were directly applied to the solid-phase C18 cartridge column without concentration. The fraction of theaflavins was obtained by 40% ethanol extraction after rinsing with water followed with 15% ethanol extraction. An aliquot of theaflavins after concentration was injected onto an ODS C18 reversed-phase column, and four theaflavins and two methylated theaflavins were sufficiently separated by a linear gradient system using distilled water and acetonitrile with 0.5% acetic acid. This analytical method is sensitive for the determination of a small amount of methylated theaflavins, since various interfering substances produced during the fermentation process were eliminated in advance by solid-phase extraction. Using this analytical method, we also demonstrated that methylated theaflavins were easily produced during the manufacture of black tea.